Alfa Romeo Giulia 2016 Key Fob & Car Keys
We don't stock a key for this vehicle yet.
No products yet for this selection.
Get notified when it's available
Programming the Alfa Romeo Giulia 2016 key
Smart key (push to start)
Programming steps
Add key - AlfaOBD or MultiECUScan (with an SGW bypass cable on 2018 and later cars)
Needs: every key the customer keeps, new or virginized Giulia / Stelvio smart key (433 MHz, 4A), SGW bypass cable that also carries the second CAN bus (pins 12 and 13), PIN read from the RFH by the tool
- Gather every key the car must keep plus the new one; the new key must be new or virginized.
- On 2018 and later cars connect the SGW bypass cable at the gateway module, then plug the interface into it.
- Open AlfaOBD or MultiECUScan, choose the model and connect to the Radio Frequency Hub (RFH).
- Run the PIN read on the RFH and note the security code the tool returns.
- Start the key programming procedure on the RFH and enter the PIN when asked.
- Present each key in turn when the tool asks, old keys and new keys (up to 8).
- Let the tool store the learned keys in the RFH, then disconnect, leave the car and test every key: lock, unlock and start.
Watch out: Every key the customer keeps must be presented in the same session; a key left out is disabled. A key already learned to another car must be virginized first. 2021 and later cars use a different security: the PIN read fails, this case does not cover them.
When the key changed
Smart key (push to start)
- 2016 - 2024This yearChip: Hitag AES (4A)433 MHzBlade: SIP22FCC: KR5ALFA434Type 952, push-button start on every car; US model years from 2017
Check coverage first: support depends on the tool's software version and the exact model. A tool that is not shown here may still cover this car.