Skip to content

Audi A3 2012 Key Fob & Car Keys

Keys that fit the 2006–2013 Audi A3: flip keys, 3 buttons, FCC ID IYZ3314, MYT4073A or NBGFS12A71. 2 compatible keys, remotes & shells (genuine and aftermarket) available for the 2012 Audi A3.

Last updated: 6 November 2026

Key specifications for the Audi A3 2006–2013

Key types
flip keys, key shells and emergency blades
Buttons
3-button
Blade profile
HU66
Compatible FCC IDs

To pick the right part, match the part number or FCC ID printed on your original remote, or listed in the Audi parts catalogue, with the specifications on each listing.

A new smart key or remote has to be programmed to the car with a key programmer, and when every key is lost the programming is still done through the diagnostic port. We ship the key worldwide from the UAE by DHL and FedEx; any automotive locksmith or the dealer can cut and program it.

Programming the Audi A3 2012 key

Smart key (push to start)

One tool lists this key.

  • OBDSTAR Key Master G3
    • Remote
    reads the PIN by OBD

Key with a blade (regular or flip)

3 tools list this key. 1 of them list all keys lost.

  • Xhorse VVDI2
    • Add key
    • All keys lost
  • Advanced Diagnostics Smart Pro
    • Add key
    • Remote
    PIN read function
    Needs: AD ADC2000 cable, AD Smart Aerial
  • OBDSTAR Key Master G3
    • Remote
    reads the PIN by OBD

All keys lost is listed by Xhorse VVDI2. Advanced Diagnostics Smart Pro lists add key only.

Programming steps

Add key - Xhorse VVDI2 (VAG)

Needs: working key, blank remote key with Megamos 48 transponder

  1. Switch the ignition on with the working key and connect by OBD; let the tool detect the 4th immobilizer cluster type.
  2. Read the immo data from the cluster and save the file.
  3. Choose Make Dealer Key and put the blank key in the programmer.
  4. Choose Add Key, enter the number of keys to learn and learn each key in the ignition when told (or learn with the saved immo data).
  5. Reset the instrument cluster, then test start and remote with every key.
Watch out: The key learn registers the number of keys you enter: have every key present, or the ones not learned stop working. Back up the immo data before any write.
All keys lost - Xhorse VVDI2 (VAG) + EEPROM programmer

Needs: blank remote key, EEPROM programmer for the cluster chip (24C32 / 24C64), battery support

  1. Switch on the hazard lights and press the brake a few times to open OBD communication; back up the ABS coding.
  2. Remove the cluster, read its 24C32 / 24C64 EEPROM with the programmer and save the original file.
  3. Let VVDI2 make the service EEPROM file and write it to the cluster chip.
  4. Refit the cluster, select the correct login type, load the original EEPROM file and write it to the cluster by OBD.
  5. Read the immo data and save it.
  6. Make the new dealer key, add it to the immobilizer and reset the instrument; then test start.
Watch out: Writing the original EEPROM back by OBD is required: skipping it leaves the cluster in service mode. Some cluster types (NEC+95320, Johnson Controls, Magneti Marelli 9S12, VDO NEC 2009+) can do all keys lost by OBD with the PIN and CS read from the engine ECU instead.

Key type not stated by the list

One tool lists this key.

  • XTOOL X100 PAD3 / X100 MAX
    • Add key
    • Remote
    PIN read function

When the key changed

Key with a blade (regular or flip)

  • 1999 - 2003Chip: ID48Blade: HU66(GCC / Europe cars)A3 8L, immobiliser 2 / 3 in the cluster
  • 2004 - 2012This yearChip: ID48Blade: HU66A3 8P, CAN cluster (immobiliser 4); US cars 2006-2013
  • 2013 - 2020Chip: Megamos AESA3 8V (MQB) flip key; keyless versions too; US cars from 2015

Check coverage first: support depends on the tool's software version and the exact model. A tool that is not shown here may still cover this car.

Frequently asked questions

Which keys fit the Audi A3 2006–2013?

2 listings fit the Audi A3 2006–2013: flip keys, key shells and emergency blades, in 3-button versions. Match the part number or FCC ID printed on your original key with the specifications on each listing.

Which FCC IDs do Audi A3 2006–2013 remotes carry?

The remotes listed for this car carry FCC ID IYZ3314, MYT4073A and NBGFS12A71. Match it with the FCC ID printed on your original remote.

Which blade profile does the Audi A3 2006–2013 key use?

The blades listed for this car: HU66.

Which tools program a Audi A3 2006–2013 key?

The tool makers' coverage lists name OBDSTAR Key Master G3, Xhorse VVDI2, Advanced Diagnostics Smart Pro and XTOOL X100 PAD3 / X100 MAX for this car; 1 of them lists all keys lost. Check your tool's latest coverage list before the job.