Skip to content

Audi A3 2018 Key Fob & Car Keys

Keys that fit the 2014–2019 Audi A3: flip keys, 3 buttons, FCC ID IYZ3314, MYT4073A or NBGFS12A71. 1 compatible key, remote & shell (genuine and aftermarket) available for the 2018 Audi A3.

Last updated: 2 October 2026

Key specifications for the Audi A3 2014–2019

Key types
flip keys, key shells and emergency blades
Buttons
3-button
Blade profile
HU66
Compatible FCC IDs

To pick the right part, match the part number or FCC ID printed on your original remote, or listed in the Audi parts catalogue, with the specifications on each listing.

A new smart key or remote has to be programmed to the car with a key programmer, and when every key is lost the programming is still done through the diagnostic port. We ship the key worldwide from the UAE by DHL and FedEx; any automotive locksmith or the dealer can cut and program it.

Programming the Audi A3 2018 key

Smart key (push to start)

2 tools list this key. None of the lists names all keys lost for this year.

  • Advanced Diagnostics Smart Pro
    • Add key
  • OBDSTAR Key Master G3
    • Remote
    reads the PIN by OBD

Key with a blade (regular or flip)

6 tools list this key. 2 of them list all keys lost.

All keys lost is listed by Autel IM508S and Autel IM608 II / IM608 Pro II. Advanced Diagnostics Smart Pro, Xhorse VVDI Key Tool Plus and Xhorse VVDI2 list add key only.

Programming steps

Add key - Autel MaxiIM IM608 / IM508S + XP400 Pro

Needs: working key, blank MQB remote key (original or aftermarket MQB), internet connection

  1. Connect by OBD with the tablet online and the XP400 Pro on USB; open IMMO, Audi, Advanced mode, A3 / Q2 / S3 / RS3 / TT (MQB), the year, Key learning.
  2. Switch the ignition on with the working key and let the tool read the immo data; save it.
  3. Answer yes to make a dealer key and put the blank key in the XP400 Pro key slot.
  4. Go on to key adaptation, enter the total number of keys and switch the ignition on with each key in turn when told.
  5. Test start and remote with every key.
Watch out: Every key the customer keeps must be adapted in the same session. Newer MQB clusters may refuse an OBD read and need the cluster read on the bench.
Add key - Xhorse VVDI2 / Key Tool Plus (VAG)

Needs: working key, blank MQB key, internet connection

  1. Connect by OBD and read the cluster EEPROM data where the tool asks; save it.
  2. Read the immo data and save it.
  3. Make the dealer key in the programmer.
  4. Reset the instrument cluster.
  5. Add the key: enter the key count and switch the ignition on with each key in turn.
  6. Reset the cluster again and test start and remote.
Watch out: Program every key the customer keeps in one session. Some Johnson Controls MQB clusters could not be read by VVDI2 by OBD (field reports); check the cluster type first.
All keys lost - Autel MaxiIM IM608 / IM508S + XP400 Pro

Needs: blank MQB remote key (original or aftermarket; Autel says Xhorse MQB remotes failed), internet connection, pay-per-use credit

  1. Connect by OBD with the tablet online; open IMMO, Audi, Advanced mode, A3 / Q2 / S3 / RS3 / TT (MQB), the year, All keys lost.
  2. Insert a blank key (or press START on a Kessy car) and read the immo data; the function is paid per use.
  3. Wait for the online calculation to finish.
  4. Make the dealer key with the blank in the XP400 Pro slot; repeat for each extra key.
  5. Run key adaptation: enter the number of keys and switch the ignition on for about 2 seconds with each key.
  6. Test start and remote with every key.
Watch out: All-keys-lost by OBD on MQB changes the immobilizer data: keys ordered from the dealer afterwards may need dealer online adaptation. Autel's OBD all keys lost covers VW / Audi MQB blade-key cars; Skoda and Seat MQB were not supported at the time.

Key type not stated by the list

One tool lists this key.

  • XTOOL X100 PAD3 / X100 MAX
    • Add key
    • Remote
    PIN read function

When the key changed

Key with a blade (regular or flip)

  • 1999 - 2003Chip: ID48Blade: HU66(GCC / Europe cars)A3 8L, immobiliser 2 / 3 in the cluster
  • 2004 - 2012Chip: ID48Blade: HU66A3 8P, CAN cluster (immobiliser 4); US cars 2006-2013
  • 2013 - 2020This yearChip: Megamos AESA3 8V (MQB) flip key; keyless versions too; US cars from 2015

Check coverage first: support depends on the tool's software version and the exact model. A tool that is not shown here may still cover this car.

Frequently asked questions

Which keys fit the Audi A3 2014–2019?

1 listing fit the Audi A3 2014–2019: flip keys, key shells and emergency blades, in 3-button versions. Match the part number or FCC ID printed on your original key with the specifications on each listing.

Which FCC IDs do Audi A3 2014–2019 remotes carry?

The remotes listed for this car carry FCC ID IYZ3314, MYT4073A and NBGFS12A71. Match it with the FCC ID printed on your original remote.

Which blade profile does the Audi A3 2014–2019 key use?

The blades listed for this car: HU66.

Which tools program a Audi A3 2014–2019 key?

The tool makers' coverage lists name Advanced Diagnostics Smart Pro, OBDSTAR Key Master G3, Autel IM508S, Autel IM608 II / IM608 Pro II, Xhorse VVDI Key Tool Plus and Xhorse VVDI2 for this car; 2 of them list all keys lost. Check your tool's latest coverage list before the job.