Skip to content

Audi Allroad 2007–2008 Key Fob & Car Keys

1 compatible key, remote & shell (genuine and aftermarket) available for the 2007 Audi Allroad.

Last updated: 16 November 2026

Key specifications for the Audi Allroad 2007–2008

Blade profile
HU66

To pick the right part, match the part number or FCC ID printed on your original remote, or listed in the Audi parts catalogue, with the specifications on each listing.

Shells and blades reuse the original electronics, and a blade needs cutting by a locksmith. We ship worldwide from the UAE by DHL and FedEx.

Programming the Audi Allroad 2007 key

Key with a blade (regular or flip)

One tool lists this key.

  • Xhorse VVDI2
    • Add key(non-US cars)

Programming steps

Add key - Xhorse VVDI2 (Audi A6L / Q7 EZS-Kessy J518)(GCC / Europe cars)

Needs: working key, blank Audi 8E remote key (4F0837220 type) cut to the car (HU66), battery support unit, every key the customer keeps

  1. Connect VVDI2 at the OBD port, put the car on battery support and switch the ignition on with a working key.
  2. Open Key Learn, 4th immobilizer, Audi, A6L / Q7 EZS-Kessy (J518) and pick the J518 processor: 9S12DT128 on most cars before 2009, 9S12DT256 after.
  3. Read the J518 EEPROM with the working key; keep the PIN and CS it shows in the job file only and save the EEPROM file.
  4. Put the blank 8E key in the VVDI2 coil and make the dealer key.
  5. Enter the total number of keys and start key learning.
  6. Switch on with the first key for about 2 seconds, then the next key within 5 seconds, until every key is learned.
  7. Test start and remote on every key.
Watch out: The key count is the total: learn every key the customer keeps in the same session, or the ones left out stop starting the car. A wrong J518 processor choice or a wrong key count is the usual cause of failure (obdii365 case): follow the tool's prompts step by step.

Key type not stated by the list

One tool lists this key.

  • XTOOL X100 PAD3 / X100 MAX
    • Add key
    • All keys lost
    • Remote
    PIN read function · all keys lost on the bench

When the key changed

Smart key (push to start)

  • 2012 - 2015Chip: PCF7945ACA6 allroad C7 (4G) and US allroad (A4 B8), BCM2 slot key

Key with a blade (regular or flip)

  • 2000 - 2005Chip: ID48Blade: HU66A6 allroad C5, immobiliser 3 in the cluster; US cars 2001-2005
  • 2006 - 2011This yearChip: ID8EBlade: HU66(GCC / Europe cars)A6 allroad C6 (4F) flip key; not sold in the US

Check coverage first: support depends on the tool's software version and the exact model. A tool that is not shown here may still cover this car.

Frequently asked questions

Which blade profile does the Audi Allroad 2007–2008 key use?

The blades listed for this car: HU66.

Which tools program a Audi Allroad 2007–2008 key?

The tool makers' coverage lists name Xhorse VVDI2 and XTOOL X100 PAD3 / X100 MAX for this car; 1 of them lists all keys lost. Check your tool's latest coverage list before the job.