Skip to content

Audi S3 2011 Key Fob & Car Keys

Keys that fit the 2008–2013 Audi S3: flip keys, 3 buttons, FCC ID IYZ3314, MYT4073A or NBGFS12A71. 2 compatible keys, remotes & shells (genuine and aftermarket) available for the 2011 Audi S3.

Last updated: 6 November 2026

Key specifications for the Audi S3 2008–2013

Key types
flip keys, key shells and emergency blades
Buttons
3-button
Blade profile
HU66
Compatible FCC IDs

To pick the right part, match the part number or FCC ID printed on your original remote, or listed in the Audi parts catalogue, with the specifications on each listing.

A new smart key or remote has to be programmed to the car with a key programmer, and when every key is lost the programming is still done through the diagnostic port. We ship the key worldwide from the UAE by DHL and FedEx; any automotive locksmith or the dealer can cut and program it.

Programming the Audi S3 2011 key

Key with a blade (regular or flip)

One tool lists this key.

  • Xhorse VVDI2
    • Add key(non-US cars)
    • All keys lost(non-US cars)

Programming steps

Add key - Xhorse VVDI2 (VAG)(GCC / Europe cars)

Needs: working key, blank remote key with Megamos 48 transponder

  1. Switch the ignition on with the working key and connect by OBD; let the tool detect the 4th immobilizer cluster type.
  2. Read the immo data from the cluster and save the file.
  3. Choose Make Dealer Key and put the blank key in the programmer.
  4. Choose Add Key, enter the number of keys to learn and learn each key in the ignition when told (or learn with the saved immo data).
  5. Reset the instrument cluster, then test start and remote with every key.
Watch out: The key learn registers the number of keys you enter: have every key present, or the ones not learned stop working. Back up the immo data before any write.
All keys lost - Xhorse VVDI2 (VAG) + EEPROM programmer(GCC / Europe cars)

Needs: blank remote key, EEPROM programmer for the cluster chip (24C32 / 24C64), battery support

  1. Switch on the hazard lights and press the brake a few times to open OBD communication; back up the ABS coding.
  2. Remove the cluster, read its 24C32 / 24C64 EEPROM with the programmer and save the original file.
  3. Let VVDI2 make the service EEPROM file and write it to the cluster chip.
  4. Refit the cluster, select the correct login type, load the original EEPROM file and write it to the cluster by OBD.
  5. Read the immo data and save it.
  6. Make the new dealer key, add it to the immobilizer and reset the instrument; then test start.
Watch out: Writing the original EEPROM back by OBD is required: skipping it leaves the cluster in service mode. Some cluster types (NEC+95320, Johnson Controls, Magneti Marelli 9S12, VDO NEC 2009+) can do all keys lost by OBD with the PIN and CS read from the engine ECU instead.

When the key changed

Key with a blade (regular or flip)

  • 2006 - 2012This yearChip: ID48Blade: HU66(GCC / Europe cars)S3 8P, CAN cluster (immobiliser 4) flip key
  • 2013 - 2020Chip: Megamos AESS3 8V (MQB) flip key; keyless versions too; US cars from 2015

Check coverage first: support depends on the tool's software version and the exact model. A tool that is not shown here may still cover this car.

Frequently asked questions

Which keys fit the Audi S3 2008–2013?

2 listings fit the Audi S3 2008–2013: flip keys, key shells and emergency blades, in 3-button versions. Match the part number or FCC ID printed on your original key with the specifications on each listing.

Which FCC IDs do Audi S3 2008–2013 remotes carry?

The remotes listed for this car carry FCC ID IYZ3314, MYT4073A and NBGFS12A71. Match it with the FCC ID printed on your original remote.

Which blade profile does the Audi S3 2008–2013 key use?

The blades listed for this car: HU66.

Which tools program a Audi S3 2008–2013 key?

The tool makers' coverage lists name Xhorse VVDI2 for this car; 1 of them lists all keys lost. Check your tool's latest coverage list before the job.