Skip to content

Audi S5 2011–2012 Key Fob & Car Keys

Keys that fit the 2011–2012 Audi S5: smart keys and remote keys, 3 or 4 buttons, FCC ID IYZFBSB802, PCF7945AC or ID46 (HITAG 2) chip, 315 MHz, 433 MHz or 868 MHz. 6 compatible keys, remotes & shells (genuine and aftermarket) available for the 2011 Audi S5.

Last updated: 15 November 2026

Key specifications for the Audi S5 2011–2012

Key types
smart keys, remote keys, key shells and emergency blades
Frequency
315 MHz, 433 MHz and 868 MHz
Buttons
3- and 4-button
Transponder chip
PCF7945AC · ID46 (HITAG 2) · ID46E (GM extended)
Blade profile
HU66
Part numbers
8T0 959 754 F · 8T0 959 754 K
Battery
CR2032
Compatible FCC IDs

To pick the right part, match the part number or FCC ID printed on your original remote, or listed in the Audi parts catalogue, with the specifications on each listing. The frequency depends on the market the car was sold in, so check 315 MHz, 433 MHz and 868 MHz against your original before ordering.

A new smart key or remote has to be programmed to the car with a key programmer, and when every key is lost the programming is still done through the diagnostic port. We ship the key worldwide from the UAE by DHL and FedEx; any automotive locksmith or the dealer can cut and program it.

Programming the Audi S5 2011 key

Smart key (push to start)

3 tools list this key. 3 of them list all keys lost.

    • Add key
    • All keys lost
  • Xhorse VVDI2
    • Add key
    • All keys lost
  • Advanced Diagnostics Smart Pro
    • All keys lost
    • Remote
    Needs: AD ADC2000 cable

Programming steps

Add key - Xhorse VVDI Key Tool Plus / VVDI2 (Audi BCM2, OBD)

Needs: working key, blank Audi BCM2 key (754-type remote or Xhorse BCM2 smart key), battery support unit

  1. Read the BCM2 version by OBD first (Fifth immobilizer system, OBD identify BCM2 type); this route is for unlocked versions only.
  2. With the working key in the ignition slot and the ignition on, read the BCM2 data by OBD and save the file.
  3. Make the dealer key: load the BCM2 file and write the blank key in the programmer.
  4. Learn the keys: load the same file, enter the total number of keys (old and new) and present each key in the slot when told.
  5. Test start, remote and keyless entry with every key.
Watch out: Learning rewrites the key list: a key not presented in the session stops working. If the OBD read stops with a data length error, read the BCM2 on the bench instead (Xhorse manual).
All keys lost - Xhorse VVDI Key Tool Plus / VVDI2 (Audi BCM2, OBD)

Needs: blank Audi BCM2 key (754-type remote or Xhorse BCM2 smart key), battery support unit

  1. Read the BCM2 version by OBD first; this route is for unlocked versions only.
  2. Open Immo Programming, Audi, Select by type, Fifth Immobilizer System, Read BCM2 Data (OBD).
  3. Put a blank key in the ignition slot, switch on the headlights and press the brake to wake the cluster, then read the vehicle information.
  4. When the tool asks, unplug the BCM2 (J393) for a few seconds and plug it back; save the BCM2 data file.
  5. Make the dealer key: choose the A4 / A5 / Q5 method that needs no working key, load the BCM2 file and write the blank key in the programmer.
  6. Learn the key: load the same file, enter the key count and present each key in the slot when told.
  7. Test start, remote and keyless entry with every key.
Watch out: Locked BCM2 versions (0711, 0650, 0641 and others on the tool list) cannot be read this way: use the BCM2 adapter route. Every key the customer keeps must be learned in the same session.

Key with a blade (regular or flip)

One tool lists this key.

  • OBDSTAR Key Master G3
    • Add key
    • Remote
    reads the PIN by OBD

When the key changed

Smart key (push to start)

  • 2008 - 2016This yearChip: PCF7945ACS5 8T, BCM2 slot key or Keyless Go fob
  • 2017 - 2022Chip: MLBS5 F5, MLB key; US 2017 cars are still 8T

Check coverage first: support depends on the tool's software version and the exact model. A tool that is not shown here may still cover this car.

Frequently asked questions

Which keys fit the Audi S5 2011–2012?

6 listings fit the Audi S5 2011–2012: smart keys, remote keys, key shells and emergency blades, in 3- and 4-button versions. Match the part number or FCC ID printed on your original key with the specifications on each listing.

What frequency does the Audi S5 2011–2012 remote use?

Listings for the Audi S5 2011–2012 come in 315 MHz, 433 MHz and 868 MHz: the frequency depends on the market the car was sold in, so check it against your original remote before ordering.

Which transponder chip does the Audi S5 2011–2012 key use?

The listings for this car carry: PCF7945AC · ID46 (HITAG 2) · ID46E (GM extended). Check the chip in each listing's specifications.

Which FCC IDs do Audi S5 2011–2012 remotes carry?

The remotes listed for this car carry FCC ID IYZFBSB802. Match it with the FCC ID printed on your original remote.

Which blade profile does the Audi S5 2011–2012 key use?

The blades listed for this car: HU66.

Which tools program a Audi S5 2011–2012 key?

The tool makers' coverage lists name Xhorse VVDI Key Tool Plus, Xhorse VVDI2, Advanced Diagnostics Smart Pro and OBDSTAR Key Master G3 for this car; 3 of them list all keys lost. Check your tool's latest coverage list before the job.