Skip to content

Audi TT 2002 Key Fob & Car Keys

Keys that fit the 1998–2003 Audi TT: transponder keys, ID13 or ID48, by model year or ID48 (Megamos Crypto) chip. 2 compatible keys, remotes & shells (genuine and aftermarket) available for the 2002 Audi TT.

Last updated: 3 November 2026

Key specifications for the Audi TT 1998–2003

Key types
transponder keys, key shells, emergency blades and key blanks
Transponder chip
ID13 or ID48, by model year · ID48 (Megamos Crypto)
Blade profile
HU66

To pick the right part, match the part number or FCC ID printed on your original remote, or listed in the Audi parts catalogue, with the specifications on each listing.

A new smart key or remote has to be programmed to the car with a key programmer, and when every key is lost the programming is still done through the diagnostic port. We ship the key worldwide from the UAE by DHL and FedEx; any automotive locksmith or the dealer can cut and program it.

Programming the Audi TT 2002 key

Key with a blade (regular or flip)

2 tools list this key. None of the lists names all keys lost for this year.

  • Advanced Diagnostics Smart Pro
    • Add key
  • Xhorse VVDI2
    • Add key

Programming steps

Add key - Xhorse VVDI2 (VAG, K-line cluster immobilizer 2 / 3 key learn)

Needs: working key, new ID48 transponder key (blank, or already matched to this car), battery support unit

  1. Switch the ignition on, connect by OBD and read the PIN from the instrument cluster (K-line instrument / immobox menu); note it.
  2. Check the immobilizer lock time: if it is not zero, leave the ignition on until it runs out.
  3. Open Key Learn for the car's K-line immobilizer and log in with the PIN.
  4. Enter the total number of keys to match, old and new: the old key list is cleared.
  5. Switch the ignition off, insert the next key and switch on; wait until the immobilizer light goes out (about 2 seconds).
  6. Repeat for every key, keeping the other keys away from the ignition, and finish all keys within about 60 seconds.
  7. Test start with every key.
Watch out: Every key the customer keeps must be matched in the same session: the count you enter replaces the old key list. If the cluster does not give the PIN by OBD, read its EEPROM on the bench to get it. Up to 8 keys can be matched.

Key type not stated by the list

One tool lists this key.

  • XTOOL X100 PAD3 / X100 MAX
    • Add key
    • All keys lost
    • Remote
    reads the PIN by OBD

Without a tool

The remote is not programmed on the car by hand: it needs a tool or a dealer.

When the key changed

Key with a blade (regular or flip)

  • 1998 - 2006This yearChip: ID48Blade: HU66TT 8N, immobiliser 2 / 3 in the cluster
  • 2007 - 2014Chip: ID48Blade: HU66TT 8J, CAN cluster (immobiliser 4), dealer-type flip key
  • 2015 - 2023Chip: Megamos AESTT 8S (MQB) flip key; keyless versions too

Check coverage first: support depends on the tool's software version and the exact model. A tool that is not shown here may still cover this car.

Frequently asked questions

Which keys fit the Audi TT 1998–2003?

2 listings fit the Audi TT 1998–2003: transponder keys, key shells, emergency blades and key blanks. Match the part number or FCC ID printed on your original key with the specifications on each listing.

Which transponder chip does the Audi TT 1998–2003 key use?

The listings for this car carry: ID13 or ID48, by model year · ID48 (Megamos Crypto). Check the chip in each listing's specifications.

Which blade profile does the Audi TT 1998–2003 key use?

The blades listed for this car: HU66.

Which tools program a Audi TT 1998–2003 key?

The tool makers' coverage lists name Advanced Diagnostics Smart Pro, Xhorse VVDI2 and XTOOL X100 PAD3 / X100 MAX for this car; 1 of them lists all keys lost. Check your tool's latest coverage list before the job.

Can the Audi TT 1998–2003 remote be programmed without a tool?

The remote is not programmed on the car by hand: it needs a tool or a dealer.