Skip to content

BMW 1 Series 2011 Key Fob & Car Keys

Keys that fit the 2011 BMW 1 Series: smart keys and remote keys, 3 or 4 buttons, FCC ID KR55WK49127, KR55WK49147 or N5FID2A, ID49 (HITAG Pro) or ID46 (HITAG 2) chip, 315 MHz, 433 MHz or 868 MHz. 13 compatible keys, remotes & shells (genuine and aftermarket) available for the 2011 BMW 1 Series.

Last updated: 15 November 2026

Key specifications for the BMW 1 Series 2011

Key types
smart keys, remote keys, key shells and emergency blades
Frequency
315 MHz, 433 MHz and 868 MHz
Buttons
3- and 4-button
Transponder chip
ID49 (HITAG Pro) · ID46 (HITAG 2)
Blade profile
HU92 · HU100R
Battery
CR2032 · VL2020

To pick the right part, match the part number or FCC ID printed on your original remote, or listed in the BMW parts catalogue, with the specifications on each listing. The frequency depends on the market the car was sold in, so check 315 MHz, 433 MHz and 868 MHz against your original before ordering.

A new smart key or remote has to be programmed to the car with a key programmer, and when every key is lost the programming is still done through the diagnostic port. We ship the key worldwide from the UAE by DHL and FedEx; any automotive locksmith or the dealer can cut and program it.

Programming the BMW 1 Series 2011 key

Smart key (push to start)

4 tools list this key. 2 of them list all keys lost.

All keys lost is listed by OBDSTAR Key Master G3 and Xhorse VVDI Key Tool Plus. Xhorse VVDI2 lists add key only.

Programming steps

Add key - Xhorse VVDI Key Tool Plus / VVDI2 (BMW)

Needs: working key, blank BMW key (dealer key is written by the tool)

  1. Switch on the hazard lights and press the brake a few times to wake the CAS, then connect by OBD and let the tool detect the CAS type; note the CAS ID.
  2. Open Key Learn and run Get Key Info: it reads the key table, cutting code and remote frequency. Save the key info file.
  3. Pick an unused key position.
  4. Put the blank key in the programmer and choose Prepare dealer key with programmer. On an encrypted CAS3+ / ISTAP the tool asks whether you have a working key: answer yes.
  5. Try the new key in the car; if a position was already used, run Add key so the CAS accepts it.
  6. Clear the fault codes and the shadow memory, then test start and remote.
Watch out: If a dealer key fails to write, unlock the key with the saved key info before trying again. ISTAP CAS3+ updates by OBD can corrupt the CAS; work on stable power or do it on the bench.
All keys lost - Xhorse VVDI Key Tool Plus (BMW, OBD)

Needs: blank BMW key, engine ISN (encrypted CAS3+), battery support unit

  1. Switch on the hazard lights and press the brake a few times to start OBD communication; connect and detect the CAS type.
  2. Choose Generate keys via OBD, Read key information; answer No to the working-key question and put the blank key in the ignition slot.
  3. Save the key information file.
  4. Choose Prepare dealer key with programmer and an unused position. On an encrypted CAS3+ the tool asks for the engine ISN: enter it if you have it, or let the tool read the CAS EEPROM and continue with File Make Key.
  5. Answer the key-type question (smart or not) and let the tool write the dealer key and a new EEPROM file.
  6. Try to start with the new key. Write the new EEPROM back only if the tool asks for it; never write it back on an ISTAP CAS, or if the ignition already switches on.
Watch out: Xhorse recommends doing CAS3+ ISTAP all keys lost on the bench, which is safer than OBD. Some US-market X5 CAS3+ cars support add key only, not all keys lost (Xhorse manual).

Key with a blade (regular or flip)

One tool lists this key.

  • Advanced Diagnostics Smart Pro
    • Add key
    • Remote
    Needs: AD ADC2000 cable, AD Smart Aerial

Key type not stated by the list

2 tools list this key. None of the lists names all keys lost for this year.

When the key changed

Smart key (push to start)

  • 2004 - 2013This yearChip: ID46E8x slot key, CAS2 / CAS3 / CAS3+; read the CAS
  • 2012 - 2019Chip: ID49FCC: YGOHUF5767F20 / F21, FEM

Check coverage first: support depends on the tool's software version and the exact model. A tool that is not shown here may still cover this car.

Frequently asked questions

Which keys fit the BMW 1 Series 2011?

13 listings fit the BMW 1 Series 2011: smart keys, remote keys, key shells and emergency blades, in 3- and 4-button versions. Match the part number or FCC ID printed on your original key with the specifications on each listing.

What frequency does the BMW 1 Series 2011 remote use?

Listings for the BMW 1 Series 2011 come in 315 MHz, 433 MHz and 868 MHz: the frequency depends on the market the car was sold in, so check it against your original remote before ordering.

Which transponder chip does the BMW 1 Series 2011 key use?

The listings for this car carry: ID49 (HITAG Pro) · ID46 (HITAG 2). Check the chip in each listing's specifications.

Which FCC IDs do BMW 1 Series 2011 remotes carry?

The remotes listed for this car carry FCC ID KR55WK49127, KR55WK49147, N5FID2A, N5FID2B and N5FID2C. Match it with the FCC ID printed on your original remote.

Which blade profile does the BMW 1 Series 2011 key use?

The blades listed for this car: HU92 · HU100R.

Which tools program a BMW 1 Series 2011 key?

The tool makers' coverage lists name OBDSTAR Key Master G3, Xhorse VVDI Key Tool Plus, Xhorse VVDI2, Autel KM100 (IKEY universal smart key), Advanced Diagnostics Smart Pro and Launch X-431 IMMO for this car; 2 of them list all keys lost. Check your tool's latest coverage list before the job.