BMW 2 Series 2019 Key Fob & Car Keys
Keys that fit the 2019 BMW 2 Series: smart keys, 4 buttons, FCC ID YG0HUF5767, ID49 (HITAG Pro) chip, 434 MHz. 2 compatible keys, remotes & shells (genuine and aftermarket) available for the 2019 BMW 2 Series.
Last updated: 15 November 2026
Key specifications for the BMW 2 Series 2019
- Key types
- smart keys, key shells and emergency blades
- Frequency
- 434 MHz
- Buttons
- 4-button
- Transponder chip
- ID49 (HITAG Pro)
- Blade profile
- HU100R
- Battery
- CR2450
- Compatible FCC IDs
To pick the right part, match the part number or FCC ID printed on your original remote, or listed in the BMW parts catalogue, with the specifications on each listing. Every remote listed for the BMW 2 Series 2019 transmits on 434 MHz.
A new smart key or remote has to be programmed to the car with a key programmer, and when every key is lost the programming is still done through the diagnostic port. We ship the key worldwide from the UAE by DHL and FedEx; any automotive locksmith or the dealer can cut and program it.
Programming the BMW 2 Series 2019 key
Smart key (push to start)
4 tools list this key. 1 of them list all keys lost.
- Xhorse VVDI2
- All keys lost
Needs: Xhorse VVDI Prog - OBDSTAR Key Master G3
- Add key
- Remote
reads the PIN by OBD - Add key
- Universal key
All keys lost is listed by Xhorse VVDI2. OBDSTAR Key Master G3 and Xhorse VVDI Key Tool Plus list add key only.
Programming steps
Add key - Xhorse VVDI Key Tool Plus (BMW FEM/BDC)
Needs: working key, blank BMW key, FEM / BDC bench platform if done on the bench, stable 12 V supply
- Connect by OBD (or put the FEM on a bench platform) and open IMMO programming, BMW, FEM/BDC immo system, Key function.
- Back up the coding and the EEPROM data first.
- If the module has not been prepared before, run the FEM / BDC programming step the tool asks for so it can read key info by OBD.
- Read the key info with the working key at the coil.
- Choose an unused position and generate the dealer key from the working key.
- Learn the new key, then test start and remote.
Add key - Xhorse VVDI Key Tool Plus (BMW FEM/BDC)(GCC / Europe cars)
Needs: working key, blank BMW key, FEM / BDC bench platform if done on the bench, stable 12 V supply
- Connect by OBD (or put the FEM / BDC module on a bench platform) and open IMMO programming, BMW, FEM/BDC immo system, Key function.
- Back up the coding and the EEPROM data first.
- If the module has not been prepared before, run the FEM / BDC programming step the tool asks for so it can read key info by OBD.
- Read the key info with the working key at the coil.
- Choose an unused position and generate the dealer key from the working key.
- Learn the new key, then test start and remote.
All keys lost - Xhorse VVDI2 (BMW) + VVDI Prog
Needs: engine ISN, VVDI Prog to read 95128 / 95256, blank BMW key, stable 12 V supply
- Back up the FEM coding by OBD.
- Remove the module, clean the EEPROM and read it with VVDI Prog several times until the reads match; save the original.
- In VVDI2 load the original EEPROM, save the service-mode file it generates and write that file to the chip.
- Refit the module, power it, connect OBD and run Program FEM.
- Write the original EEPROM back, refit the module and restore the coding.
- Read the engine data and work out the ISN, then prepare the dealer key with the ISN and learn it; test start and remote.
All keys lost - Xhorse VVDI2 (BMW) + VVDI Prog(GCC / Europe cars)
Needs: engine ISN, VVDI Prog to read 95128 / 95256, blank BMW key, stable 12 V supply
- Back up the FEM / BDC coding by OBD.
- Remove the module, clean the EEPROM and read it with VVDI Prog several times until the reads match; save the original.
- In VVDI2 load the original EEPROM, save the service-mode file it generates and write that file to the chip.
- Refit the module, power it, connect OBD and run Program FEM or Program BDC, whichever the tool shows for this module.
- Write the original EEPROM back, refit the module and restore the coding.
- Read the engine data and work out the ISN, then prepare the dealer key with the ISN and learn it; test start and remote.
When the key changed
Smart key (push to start)
- 2014 - 2021This yearChip: ID49FCC: YGOHUF5767F22 / F23 coupe and convertible, FEM
- 2014 - 2021This yearChip: ID49(GCC / Europe cars)F45 / F46 Active / Gran Tourer; read the module, FEM or BDC
Check coverage first: support depends on the tool's software version and the exact model. A tool that is not shown here may still cover this car.
Frequently asked questions
Which keys fit the BMW 2 Series 2019?
2 listings fit the BMW 2 Series 2019: smart keys, key shells and emergency blades, in 4-button versions. Match the part number or FCC ID printed on your original key with the specifications on each listing.
What frequency does the BMW 2 Series 2019 remote use?
Every remote listed for the BMW 2 Series 2019 transmits on 434 MHz.
Which transponder chip does the BMW 2 Series 2019 key use?
The listings for this car carry: ID49 (HITAG Pro). Check the chip in each listing's specifications.
Which FCC IDs do BMW 2 Series 2019 remotes carry?
The remotes listed for this car carry FCC ID YG0HUF5767. Match it with the FCC ID printed on your original remote.
Which blade profile does the BMW 2 Series 2019 key use?
The blades listed for this car: HU100R.
Which tools program a BMW 2 Series 2019 key?
The tool makers' coverage lists name Xhorse VVDI2, OBDSTAR Key Master G3, Xhorse VVDI Key Tool Plus and Autel KM100 (IKEY universal smart key) for this car; 1 of them lists all keys lost. Check your tool's latest coverage list before the job.

