BMW 3 Series 2008 Key Fob & Car Keys
Keys that fit the 2008 BMW 3 Series: smart keys and remote keys, 3 buttons, FCC ID KR55WK49127 or KR55WK49147, ID46 (HITAG 2) chip, 315 MHz, 433 MHz or 868 MHz. 11 compatible keys, remotes & shells (genuine and aftermarket) available for the 2008 BMW 3 Series.
Last updated: 15 November 2026
Key specifications for the BMW 3 Series 2008
- Key types
- smart keys, remote keys, key shells, emergency blades and key blanks
- Frequency
- 315 MHz, 433 MHz and 868 MHz
- Buttons
- 3-button
- Transponder chip
- ID46 (HITAG 2)
- Blade profile
- HU92
- Part numbers
- 51217139710
- Battery
- CR2032 · VL2020
- Compatible FCC IDs
To pick the right part, match the part number or FCC ID printed on your original remote, or listed in the BMW parts catalogue, with the specifications on each listing. The frequency depends on the market the car was sold in, so check 315 MHz, 433 MHz and 868 MHz against your original before ordering.
A new smart key or remote has to be programmed to the car with a key programmer, and when every key is lost the programming is still done through the diagnostic port. We ship the key worldwide from the UAE by DHL and FedEx; any automotive locksmith or the dealer can cut and program it.
- BMW 1 Series 3 Series X5 2006-2013 CAS3 Slot Key 3-button 315MHz - 6986583 KR55WK49127 Aftermarket
SKU: B04709
$16.85In Stock - BMW 3 Series 5 Series X5 X6 M5 2006-2013 Emergency Key Blade HU92 Uncut Aftermarket Insert
SKU: B01376
$1.12In Stock - $13.96Out of Stock
Programming the BMW 3 Series 2008 key
Smart key (push to start)
3 tools list this key. 3 of them list all keys lost.
- OBDSTAR Key Master G3
- Add key
- All keys lost
- Remote
reads the PIN by OBD - Add key
- All keys lost
- Xhorse VVDI2
- Add key
- All keys lost
Programming steps
Add key - Xhorse VVDI Key Tool Plus / VVDI2 (BMW)
Needs: working key, blank BMW key (dealer key is written by the tool), battery support unit
- Switch on the hazard lights and press the brake a few times to wake the CAS; connect by OBD and let the tool detect the CAS type. Write down the CAS ID.
- Open Key Learn and run Get Key Info (on an encrypted CAS3+ choose Add key): it reads the key table, cutting code and remote frequency. Save the key info.
- Take the key out of the slot (a keyless key out of the car) when the tool asks.
- Pick a free key position, put the blank key in the programmer and run Prepare dealer key with programmer.
- Try to start with the new key. If it does not start, run Add key so the CAS takes it.
- If the car will not start after adding, run Synch DME-CAS and Synch CAS-ELV with the original key in, then try again.
- Clear the fault codes and the shadow memory, then test start and remote.
All keys lost - Xhorse VVDI Key Tool Plus / VVDI2 (BMW, OBD)
Needs: blank BMW key, battery support unit, no ISN needed on the try-start route
- Switch on the hazard lights and press the brake a few times to start OBD communication; connect, detect the CAS type and write down the CAS ID.
- Key Learn > Get Key Info; on an encrypted CAS3+ choose Lost all key. No key in the slot, keyless keys out of the car. Save the key info.
- CAS2, CAS3 and plain CAS3+: make the key with Prepare dealer key with programmer on a free position, the same way as add key.
- Encrypted CAS3+ / ISTAP: choose Prepare dealer key with ignition switch, pre-process the blank and put it in the slot; the tool tries to start up to 16 times (64 on ISTAP) until the engine runs.
- When the engine runs, leave the key in and run Synch DME-CAS at least 10 times, or the key may not start the car a second time.
- Clear the fault codes and the shadow memory, then test start and remote; make the second key with Add key.
Key with a blade (regular or flip)
One tool lists this key.
- Advanced Diagnostics Smart Pro
- Add key
- Remote
Needs: AD ADC2000 cable, AD Smart Aerial
Key type not stated by the list
One tool lists this key.
- Launch X-431 IMMO
- Add key
- Remote
When the key changed
Smart key (push to start)
- 2006 - 2011This yearChip: ID46E90 / E91 / E92 / E93, CAS2 / CAS3 slot key
- 2012 - 2018Chip: ID49FCC: YGOHUF5767F30 / F31 / F34, FEM
- from 2019Chip: ID49FCC: N5F-ID21AG20 / G21, BDC2; later cars may carry a new FCC id
Key with a blade (regular or flip)
- 1995 - 1999Chip: ID33E36, EWS; 1999 can be E36 (ID33) or E46 (ID44)
- 2000 - 2005Chip: ID44Blade: HU92E46, EWS3 remote head key
Check coverage first: support depends on the tool's software version and the exact model. A tool that is not shown here may still cover this car.
Frequently asked questions
Which keys fit the BMW 3 Series 2008?
11 listings fit the BMW 3 Series 2008: smart keys, remote keys, key shells, emergency blades and key blanks, in 3-button versions. Match the part number or FCC ID printed on your original key with the specifications on each listing.
What frequency does the BMW 3 Series 2008 remote use?
Listings for the BMW 3 Series 2008 come in 315 MHz, 433 MHz and 868 MHz: the frequency depends on the market the car was sold in, so check it against your original remote before ordering.
Which transponder chip does the BMW 3 Series 2008 key use?
The listings for this car carry: ID46 (HITAG 2). Check the chip in each listing's specifications.
Which FCC IDs do BMW 3 Series 2008 remotes carry?
The remotes listed for this car carry FCC ID KR55WK49127 and KR55WK49147. Match it with the FCC ID printed on your original remote.
Which blade profile does the BMW 3 Series 2008 key use?
The blades listed for this car: HU92.
Which tools program a BMW 3 Series 2008 key?
The tool makers' coverage lists name OBDSTAR Key Master G3, Xhorse VVDI Key Tool Plus, Xhorse VVDI2, Advanced Diagnostics Smart Pro and Launch X-431 IMMO for this car; 3 of them list all keys lost. Check your tool's latest coverage list before the job.










