Skip to content

BMW 3 Series 2009–2010 Key Fob & Car Keys

Keys that fit the 2009–2010 BMW 3 Series: smart keys and remote keys, 3 buttons, FCC ID KR55WK49127 or KR55WK49147, ID46 (HITAG 2) chip, 315 MHz, 433 MHz or 868 MHz. 13 compatible keys, remotes & shells (genuine and aftermarket) available for the 2009 BMW 3 Series.

Last updated: 15 November 2026

Key specifications for the BMW 3 Series 2009–2010

Key types
smart keys, remote keys, key shells, emergency blades and key blanks
Frequency
315 MHz, 433 MHz and 868 MHz
Buttons
3-button
Transponder chip
ID46 (HITAG 2)
Blade profile
HU92
Part numbers
51217139710
Battery
CR2032 · VL2020
Compatible FCC IDs

To pick the right part, match the part number or FCC ID printed on your original remote, or listed in the BMW parts catalogue, with the specifications on each listing. The frequency depends on the market the car was sold in, so check 315 MHz, 433 MHz and 868 MHz against your original before ordering.

A new smart key or remote has to be programmed to the car with a key programmer, and when every key is lost the programming is still done through the diagnostic port. We ship the key worldwide from the UAE by DHL and FedEx; any automotive locksmith or the dealer can cut and program it.

Programming the BMW 3 Series 2009 key

Smart key (push to start)

3 tools list this key. 3 of them list all keys lost.

  • OBDSTAR Key Master G3
    • Add key
    • All keys lost
    • Remote
    reads the PIN by OBD
    • Add key
    • All keys lost
  • Xhorse VVDI2
    • Add key
    • All keys lost

Programming steps

Add key - Xhorse VVDI Key Tool Plus / VVDI2 (BMW)

Needs: working key, blank BMW key (dealer key is written by the tool), battery support unit

  1. Switch on the hazard lights and press the brake a few times to wake the CAS; connect by OBD and let the tool detect the CAS type. Write down the CAS ID.
  2. Open Key Learn and run Get Key Info (on an encrypted CAS3+ choose Add key): it reads the key table, cutting code and remote frequency. Save the key info.
  3. Take the key out of the slot (a keyless key out of the car) when the tool asks.
  4. Pick a free key position, put the blank key in the programmer and run Prepare dealer key with programmer.
  5. Try to start with the new key. If it does not start, run Add key so the CAS takes it.
  6. If the car will not start after adding, run Synch DME-CAS and Synch CAS-ELV with the original key in, then try again.
  7. Clear the fault codes and the shadow memory, then test start and remote.
Watch out: If a dealer key fails to write, unlock it with the saved key info before trying again. An ISTAP CAS3+ asks for a flash update the first time (about 10 minutes): keep the power steady, a dropped session can corrupt the CAS.
All keys lost - Xhorse VVDI Key Tool Plus / VVDI2 (BMW, OBD)

Needs: blank BMW key, battery support unit, no ISN needed on the try-start route

  1. Switch on the hazard lights and press the brake a few times to start OBD communication; connect, detect the CAS type and write down the CAS ID.
  2. Key Learn > Get Key Info; on an encrypted CAS3+ choose Lost all key. No key in the slot, keyless keys out of the car. Save the key info.
  3. CAS2, CAS3 and plain CAS3+: make the key with Prepare dealer key with programmer on a free position, the same way as add key.
  4. Encrypted CAS3+ / ISTAP: choose Prepare dealer key with ignition switch, pre-process the blank and put it in the slot; the tool tries to start up to 16 times (64 on ISTAP) until the engine runs.
  5. When the engine runs, leave the key in and run Synch DME-CAS at least 10 times, or the key may not start the car a second time.
  6. Clear the fault codes and the shadow memory, then test start and remote; make the second key with Add key.
Watch out: Xhorse recommends doing CAS3+ ISTAP all keys lost on the bench, which is safer than OBD. Never write a new EEPROM back to an ISTAP CAS, or when the ignition already switches on with the new key. Keep a stable supply; a dropped OBD session can corrupt the CAS.

Key with a blade (regular or flip)

One tool lists this key.

  • Advanced Diagnostics Smart Pro
    • Add key
    • Remote
    Needs: AD ADC2000 cable, AD Smart Aerial

Key type not stated by the list

One tool lists this key.

  • Launch X-431 IMMO
    • Add key
    • Remote

When the key changed

Smart key (push to start)

  • 2006 - 2011This yearChip: ID46E90 / E91 / E92 / E93, CAS2 / CAS3 slot key
  • 2012 - 2018Chip: ID49FCC: YGOHUF5767F30 / F31 / F34, FEM
  • from 2019Chip: ID49FCC: N5F-ID21AG20 / G21, BDC2; later cars may carry a new FCC id

Key with a blade (regular or flip)

  • 1995 - 1999Chip: ID33E36, EWS; 1999 can be E36 (ID33) or E46 (ID44)
  • 2000 - 2005Chip: ID44Blade: HU92E46, EWS3 remote head key

Check coverage first: support depends on the tool's software version and the exact model. A tool that is not shown here may still cover this car.

Frequently asked questions

Which keys fit the BMW 3 Series 2009–2010?

13 listings fit the BMW 3 Series 2009–2010: smart keys, remote keys, key shells, emergency blades and key blanks, in 3-button versions. Match the part number or FCC ID printed on your original key with the specifications on each listing.

What frequency does the BMW 3 Series 2009–2010 remote use?

Listings for the BMW 3 Series 2009–2010 come in 315 MHz, 433 MHz and 868 MHz: the frequency depends on the market the car was sold in, so check it against your original remote before ordering.

Which transponder chip does the BMW 3 Series 2009–2010 key use?

The listings for this car carry: ID46 (HITAG 2). Check the chip in each listing's specifications.

Which FCC IDs do BMW 3 Series 2009–2010 remotes carry?

The remotes listed for this car carry FCC ID KR55WK49127 and KR55WK49147. Match it with the FCC ID printed on your original remote.

Which blade profile does the BMW 3 Series 2009–2010 key use?

The blades listed for this car: HU92.

Which tools program a BMW 3 Series 2009–2010 key?

The tool makers' coverage lists name OBDSTAR Key Master G3, Xhorse VVDI Key Tool Plus, Xhorse VVDI2, Advanced Diagnostics Smart Pro and Launch X-431 IMMO for this car; 3 of them list all keys lost. Check your tool's latest coverage list before the job.