SKU: B04739
BMW 3 Series 2016–2017 Key Fob & Car Keys
Keys that fit the 2016–2017 BMW 3 Series: smart keys, 3 or 4 buttons, FCC ID IDGNG1, NBGIDGNG1 or YG0HUF5767, PCF7953P or ID49 (HITAG Pro) chip, 434 MHz or 868 MHz. 13 compatible keys, remotes & shells (genuine and aftermarket) available for the 2016 BMW 3 Series.
Last updated: 15 November 2026
Key specifications for the BMW 3 Series 2016–2017
- Key types
- smart keys, key shells, emergency blades and key blanks
- Frequency
- 434 MHz and 868 MHz
- Buttons
- 3- and 4-button
- Transponder chip
- PCF7953P · ID49 (HITAG Pro)
- Blade profile
- HU100R
- Part numbers
- 8723602-02
- Battery
- CR2032 · CR2450
- Compatible FCC IDs
To pick the right part, match the part number or FCC ID printed on your original remote, or listed in the BMW parts catalogue, with the specifications on each listing. The frequency depends on the market the car was sold in, so check 434 MHz and 868 MHz against your original before ordering.
A new smart key or remote has to be programmed to the car with a key programmer, and when every key is lost the programming is still done through the diagnostic port. We ship the key worldwide from the UAE by DHL and FedEx; any automotive locksmith or the dealer can cut and program it.
- 2013-2018 BMW F-series Smart Key Fem 3-button 434MHz 8723602-02 Genuine · OEM · New (no box)$42.13In Stock
- $21.07In Stock
- $56.18
$63.20In Stock - BMW 3 5 7 Series CAS4 2013-2018 Smart Key 4-button 434MHz - 9312540 YGOHUF5767 Aftermarket
SKU: B01336
$18.26In Stock - BMW 3 Series 5 Series X5 X6 2014-2024 Emergency Key Blade HU100R Uncut Aftermarket Insert
SKU: B01380
$1.40In Stock - BMW FEM BDC Smart Key Shell 3-button (Lock Unlock Trunk) - HU100R Blade - for 5WK49861 IDGNG1
SKU: B07866
$3.37In Stock
Programming the BMW 3 Series 2016 key
Smart key (push to start)
3 tools list this key. 1 of them list all keys lost.
- Add key
- All keys lost
- OBDSTAR Key Master G3
- Add key
- Remote
reads the PIN by OBD - Universal key
All keys lost is listed by Xhorse VVDI Key Tool Plus. OBDSTAR Key Master G3 lists add key only.
Programming steps
Add key - Xhorse VVDI Key Tool Plus (FEM/BDC)
Needs: working key, blank BMW FEM key (ID49), EEPROM adapter or soldering for the 95128 chip, battery support unit
- Connect by OBD. IMMO > Europe > BMW > FEM/BDC > Key function; read the key information and save it.
- Back up the FEM coding by OBD and keep the file.
- Remove the FEM, read its 95128 EEPROM with the programmer and save the original file under a clear name.
- Let the tool make the service-mode data, write it to the EEPROM, refit the FEM and run Program FEM/BDC by OBD on steady power.
- Write the original EEPROM file back, refit the FEM, connect by OBD and restore / verify the coding.
- Prepare dealer key: choose a free position; for add key the ISN comes from the working key. Hold the new key at the emergency start position and learn it.
- Read the key information again: the new position must show data. Test start, remote and comfort access.
All keys lost - Xhorse VVDI Key Tool Plus (FEM/BDC)
Needs: blank BMW FEM key (ID49), engine ISN read from the DME, EEPROM adapter or soldering for the 95128 chip, battery support unit
- Connect by OBD. IMMO > Europe > BMW > FEM/BDC > Key function; read the key information and save it.
- Back up the FEM coding by OBD and keep the file.
- Remove the FEM, read its 95128 EEPROM with the programmer and save the original file under a clear name.
- Let the tool make the service-mode data, write it to the EEPROM, refit the FEM and run Program FEM/BDC by OBD on steady power.
- Write the original EEPROM file back, refit the FEM, connect by OBD and restore / verify the coding.
- Read the engine ISN from the DME (by OBD or on the bench, depending on the DME). Prepare dealer key on a free position, choose all keys lost, enter the ISN and learn the new key at the emergency start position.
- Read the key information again: the new position must show data. Test start, remote and comfort access.
Key type not stated by the list
One tool lists this key.
- Launch X-431 IMMO
- Add key
- Remote
When the key changed
Smart key (push to start)
- 2006 - 2011Chip: ID46E90 / E91 / E92 / E93, CAS2 / CAS3 slot key
- 2012 - 2018This yearChip: ID49FCC: YGOHUF5767F30 / F31 / F34, FEM
- from 2019Chip: ID49FCC: N5F-ID21AG20 / G21, BDC2; later cars may carry a new FCC id
Key with a blade (regular or flip)
- 1995 - 1999Chip: ID33E36, EWS; 1999 can be E36 (ID33) or E46 (ID44)
- 2000 - 2005Chip: ID44Blade: HU92E46, EWS3 remote head key
Check coverage first: support depends on the tool's software version and the exact model. A tool that is not shown here may still cover this car.
Frequently asked questions
Which keys fit the BMW 3 Series 2016–2017?
13 listings fit the BMW 3 Series 2016–2017: smart keys, key shells, emergency blades and key blanks, in 3- and 4-button versions. Match the part number or FCC ID printed on your original key with the specifications on each listing.
What frequency does the BMW 3 Series 2016–2017 remote use?
Listings for the BMW 3 Series 2016–2017 come in 434 MHz and 868 MHz: the frequency depends on the market the car was sold in, so check it against your original remote before ordering.
Which transponder chip does the BMW 3 Series 2016–2017 key use?
The listings for this car carry: PCF7953P · ID49 (HITAG Pro). Check the chip in each listing's specifications.
Which FCC IDs do BMW 3 Series 2016–2017 remotes carry?
The remotes listed for this car carry FCC ID IDGNG1, NBGIDGNG1 and YG0HUF5767. Match it with the FCC ID printed on your original remote.
Which blade profile does the BMW 3 Series 2016–2017 key use?
The blades listed for this car: HU100R.
Which tools program a BMW 3 Series 2016–2017 key?
The tool makers' coverage lists name Xhorse VVDI Key Tool Plus, OBDSTAR Key Master G3, Autel KM100 (IKEY universal smart key) and Launch X-431 IMMO for this car; 1 of them lists all keys lost. Check your tool's latest coverage list before the job.












