BMW X1 2011–2013 Key Fob & Car Keys
Keys that fit the 2011–2013 BMW X1: smart keys and remote keys, 3 buttons, FCC ID KR55WK49147, N5FID2A or N5FID2B, ID46 (HITAG 2) or ID49 (HITAG Pro) chip, 433 MHz or 868 MHz. 5 compatible keys, remotes & shells (genuine and aftermarket) available for the 2011 BMW X1.
Last updated: 13 November 2026
Key specifications for the BMW X1 2011–2013
- Key types
- smart keys, remote keys, key shells and emergency blades
- Frequency
- 433 MHz and 868 MHz
- Buttons
- 3-button
- Transponder chip
- ID46 (HITAG 2) · ID49 (HITAG Pro)
- Blade profile
- HU92 · HU100R
- Battery
- CR2032 · VL2020
- Compatible FCC IDs
To pick the right part, match the part number or FCC ID printed on your original remote, or listed in the BMW parts catalogue, with the specifications on each listing. The frequency depends on the market the car was sold in, so check 433 MHz and 868 MHz against your original before ordering.
A new smart key or remote has to be programmed to the car with a key programmer, and when every key is lost the programming is still done through the diagnostic port. We ship the key worldwide from the UAE by DHL and FedEx; any automotive locksmith or the dealer can cut and program it.
- $9.83In Stock
- $13.96Out of Stock
Programming the BMW X1 2011 key
Smart key (push to start)
5 tools list this key. 4 of them list all keys lost.
- OBDSTAR Key Master G3
- Add key
- All keys lost
- Remote
reads the PIN by OBD - Add key
- All keys lost
- All keys lost
Needs: Autel XP400 Pro- All keys lost
Needs: Autel XP400 Pro- Xhorse VVDI2
- Add key
All keys lost is listed by OBDSTAR Key Master G3, Xhorse VVDI Key Tool Plus, Autel IM508S and Autel IM608 II / IM608 Pro II. Xhorse VVDI2 lists add key only.
Programming steps
Add key - Xhorse VVDI Key Tool Plus / VVDI2 (BMW)
Needs: working key, blank BMW key (dealer key is written by the tool)
- Switch on the hazard lights and press the brake a few times to wake the CAS, then connect by OBD and let the tool detect the CAS type; note the CAS ID.
- Open Key Learn and run Get Key Info: it reads the key table, cutting code and remote frequency. Save the key info file.
- Pick an unused key position.
- Put the blank key in the programmer and choose Prepare dealer key with programmer. On an encrypted CAS3+ / ISTAP the tool asks whether you have a working key: answer yes.
- Try the new key in the car; if a position was already used, run Add key so the CAS accepts it.
- Clear the fault codes and the shadow memory, then test start and remote.
All keys lost - Autel MaxiIM IM608 / IM508S + XP400 Pro (bench)
Needs: blank BMW key, APA106 / APA109 cable, engine ISN (read from the DME, for example with G-BOX3), bench power
- Read the engine ISN from the DME first (G-BOX3 or another DME reader) and note it.
- Remove the CAS, open it and connect the XP400 Pro with the APA106 / APA109 cable as the board diagram in the tool shows.
- In IMMO, BMW, CAS3 / CAS3+, ECU operation, read the EEPROM and the flash for the mask the tool names and save both files.
- Open Key operation, Make key with file, load the EEPROM file and check VIN, mileage and frequency.
- Pick an unused key position, choose Write key and Lost all keys, enter the ISN and the key type, then put the blank key in the XP400 Pro and write it.
- Save the new EEPROM file and write it back to the CAS when the tool tells you to (not on an ISTAP CAS, where the key is written without changing the CAS).
- Refit the CAS and start the car with the new key; test the remote.
All keys lost - Xhorse VVDI Key Tool Plus (BMW, OBD)
Needs: blank BMW key, engine ISN (encrypted CAS3+), battery support unit
- Switch on the hazard lights and press the brake a few times to start OBD communication; connect and detect the CAS type.
- Choose Generate keys via OBD, Read key information; answer No to the working-key question and put the blank key in the ignition slot.
- Save the key information file.
- Choose Prepare dealer key with programmer and an unused position. On an encrypted CAS3+ the tool asks for the engine ISN: enter it if you have it, or let the tool read the CAS EEPROM and continue with File Make Key.
- Answer the key-type question (smart or not) and let the tool write the dealer key and a new EEPROM file.
- Try to start with the new key. Write the new EEPROM back only if the tool asks for it; never write it back on an ISTAP CAS, or if the ignition already switches on.
Key type not stated by the list
2 tools list this key. None of the lists names all keys lost for this year.
- Launch X-431 IMMO
- Add key
- Add key
When the key changed
Smart key (push to start)
- 2009 - 2015This yearChip: ID46FCC: KR55WK49127E84, CAS3 / CAS3+ slot key or comfort-access key; read the CAS
- 2015 - 2022Chip: ID49FCC: NBGIDGNG1F48, BDC; US model years 2016-2022
Check coverage first: support depends on the tool's software version and the exact model. A tool that is not shown here may still cover this car.
Frequently asked questions
Which keys fit the BMW X1 2011–2013?
5 listings fit the BMW X1 2011–2013: smart keys, remote keys, key shells and emergency blades, in 3-button versions. Match the part number or FCC ID printed on your original key with the specifications on each listing.
What frequency does the BMW X1 2011–2013 remote use?
Listings for the BMW X1 2011–2013 come in 433 MHz and 868 MHz: the frequency depends on the market the car was sold in, so check it against your original remote before ordering.
Which transponder chip does the BMW X1 2011–2013 key use?
The listings for this car carry: ID46 (HITAG 2) · ID49 (HITAG Pro). Check the chip in each listing's specifications.
Which FCC IDs do BMW X1 2011–2013 remotes carry?
The remotes listed for this car carry FCC ID KR55WK49147, N5FID2A, N5FID2B and N5FID2C. Match it with the FCC ID printed on your original remote.
Which blade profile does the BMW X1 2011–2013 key use?
The blades listed for this car: HU92 · HU100R.
Which tools program a BMW X1 2011–2013 key?
The tool makers' coverage lists name OBDSTAR Key Master G3, Xhorse VVDI Key Tool Plus, Autel IM508S, Autel IM608 II / IM608 Pro II, Xhorse VVDI2 and Launch X-431 IMMO for this car; 4 of them list all keys lost. Check your tool's latest coverage list before the job.




