Skip to content

BMW X3 2012 Key Fob & Car Keys

Keys that fit the 2011–2013 BMW X3: smart keys, 3 or 4 buttons, FCC ID HUF5661, KR55WK49863 or YG0HUF5662, ID49 (HITAG Pro) chip, 315 MHz or 868 MHz. 19 compatible keys, remotes & shells (genuine and aftermarket) available for the 2012 BMW X3.

Last updated: 15 November 2026

Key specifications for the BMW X3 2011–2013

Key types
smart keys, key shells and emergency blades
Frequency
315 MHz and 868 MHz
Buttons
3- and 4-button
Transponder chip
ID49 (HITAG Pro)
Blade profile
HU100R
Battery
CR2450

To pick the right part, match the part number or FCC ID printed on your original remote, or listed in the BMW parts catalogue, with the specifications on each listing. The frequency depends on the market the car was sold in, so check 315 MHz and 868 MHz against your original before ordering.

A new smart key or remote has to be programmed to the car with a key programmer, and when every key is lost the programming is still done through the diagnostic port. We ship the key worldwide from the UAE by DHL and FedEx; any automotive locksmith or the dealer can cut and program it.

Programming the BMW X3 2012 key

Smart key (push to start)

6 tools list this key. 2 of them list all keys lost.

All keys lost is listed by Xhorse VVDI Key Tool Plus and Xhorse VVDI2. OBDSTAR Key Master G3, Autel IM508S and Autel IM608 II / IM608 Pro II list add key only.

Programming steps

Add key - Autel MaxiIM IM608 / IM508S + XP400 Pro

Needs: working key, blank BMW key, internet connection

  1. Connect by OBD with the tablet online; go to IMMO, BMW, automatic selection and check in ECU information whether the car has CAS4 or CAS4+.
  2. Open Key learning and read the key information; save the backup the tool makes.
  3. Choose an unused key position and generate the dealer key in the XP400 Pro, following the prompts (the working key may be asked for).
  4. Hold the new key where the tool asks and let the CAS learn it.
  5. Test start and remote. If the new key starts the car but keyless entry does not work yet, Autel's note says programming a second key brings it in.
Watch out: Do not unlock or rewrite the CAS4+ by OBD on low voltage; use battery support. After any unlock step check that the original keys still start the car before you leave.
All keys lost - Xhorse VVDI2 / Key Tool Plus (BMW File Make Key)

Needs: blank BMW key, CAS4 EEPROM read (bench, 5M48H / 1N35H), engine ISN for the encrypted version, EEPROM programmer (VVDI Prog or the Key Tool Plus PROG function)

  1. Remove the CAS and read its EEPROM with the programmer; save the original file.
  2. Read the engine ISN from the DME if the tool reports an encrypted CAS4 / CAS4+.
  3. In the BMW software open File Make Key, choose CAS4 or CAS4+ with the mask that matches (5M48H / 1N35H) and load the EEPROM file; positions showing FFFFFFFF are free.
  4. Pick a free position, put the blank key in the programmer and press Prepare dealer key; on the encrypted version choose the all-keys-lost method and give the ISN.
  5. Refit the CAS and test start and remote with the new key.
Watch out: Work only on a copy of the EEPROM file and keep the original. A CAS4 key made this way cannot be unlocked again for reuse (Xhorse manual).

Key type not stated by the list

2 tools list this key. 1 of them list all keys lost.

  • Launch X-431 IMMO
    • Add key
    • All keys lost
    • Remote
    all keys lost on the bench
    • Add key

All keys lost is listed by Launch X-431 IMMO. Lonsdor K518 lists add key only.

When the key changed

Smart key (push to start)

  • 2011 - 2017This yearChip: ID49F25, CAS4 / CAS4+
  • 2018 - 2022Chip: ID49FCC: N5F-ID21AG01, BDC2 / BDC3

Check coverage first: support depends on the tool's software version and the exact model. A tool that is not shown here may still cover this car.

Frequently asked questions

Which keys fit the BMW X3 2011–2013?

19 listings fit the BMW X3 2011–2013: smart keys, key shells and emergency blades, in 3- and 4-button versions. Match the part number or FCC ID printed on your original key with the specifications on each listing.

What frequency does the BMW X3 2011–2013 remote use?

Listings for the BMW X3 2011–2013 come in 315 MHz and 868 MHz: the frequency depends on the market the car was sold in, so check it against your original remote before ordering.

Which transponder chip does the BMW X3 2011–2013 key use?

The listings for this car carry: ID49 (HITAG Pro). Check the chip in each listing's specifications.

Which FCC IDs do BMW X3 2011–2013 remotes carry?

The remotes listed for this car carry FCC ID HUF5661, KR55WK49863 and YG0HUF5662. Match it with the FCC ID printed on your original remote.

Which blade profile does the BMW X3 2011–2013 key use?

The blades listed for this car: HU100R.

Which tools program a BMW X3 2011–2013 key?

The tool makers' coverage lists name Xhorse VVDI Key Tool Plus, Xhorse VVDI2, OBDSTAR Key Master G3, Autel IM508S, Autel IM608 II / IM608 Pro II and Autel KM100 (IKEY universal smart key) for this car; 2 of them list all keys lost. Check your tool's latest coverage list before the job.