Buick Cascada 2017 Key Fob & Car Keys
2 compatible keys, remotes & shells (genuine and aftermarket) available for the 2017 Buick Cascada.
Last updated: 3 November 2026
Key specifications for the Buick Cascada 2017
- Key types
- emergency blades and key blanks
- Transponder chip
- ID46 (HITAG 2)
- Blade profile
- HU100
- Part numbers
- 13510389
To pick the right part, match the part number or FCC ID printed on your original remote, or listed in the Buick parts catalogue, with the specifications on each listing.
Shells and blades reuse the original electronics, and a blade needs cutting by a locksmith. We ship worldwide from the UAE by DHL and FedEx.
- $1.40In Stock
Programming the Buick Cascada 2017 key
Key with a blade (regular or flip)
One tool lists this key.
- OBDSTAR Key Master G3
- Add key
- All keys lost
- Remote
reads the PIN by OBD
Programming steps
Add key - on the car(US / Canada cars)
Needs: With two programmed keys, two programmed keys, a new key cut to the car
- Insert the first programmed key and turn it to ON/RUN.
- Turn it to LOCK/OFF and remove it.
- Within 5 seconds, insert the second programmed key and turn it to ON/RUN.
- Within 5 seconds, insert the new key and turn it to ON/RUN. The security light goes off when the key is programmed.
- Repeat all steps for each extra key.
Add key - on the car(US / Canada cars)
Needs: Two programmed keys not available, a new key cut to the car, the car switched off and every key to be programmed at hand
- Insert the new key in the ignition and turn it to ON/RUN. The security light comes on.
- Wait about 10 minutes until the security light goes off.
- Turn the ignition to LOCK/OFF.
- Repeat steps 1 to 3 two more times.
- After the third wait, turn the key to ON/RUN. The key is now learned.
- Turn the ignition OFF, insert the second new key and turn it to ON/RUN to learn it.
All keys lost - on the car(US / Canada cars)
Needs: new key cut to the vehicle, 30 minutes
- Cut the new key. Have every key the customer keeps; the old keys stop working at the end.
- Insert the new key and turn to ON/RUN without cranking; the security light comes on.
- Wait about 10 minutes until the security light goes off, then turn to LOCK/OFF.
- Repeat ON/RUN, wait 10 minutes, LOCK/OFF two more times (about 30 minutes in all).
- After the third cycle turn to ON/RUN: this key is learned and every previously known key is erased.
- Learn the remaining keys with a key tool or the car's add-key learn (sources differ on one or two working keys).
Key type not stated by the list
One tool lists this key.
- Launch X-431 IMMO
- Add key
Without a tool
The remote is programmed on the car, without a tool. No working key is needed.
When the key changed
Key with a blade (regular or flip)
- 2016 - 2019This yearChip: ID46 Hitag2 Extended315 MHzBlade: HU100FCC: KR55WK50073, OHT01060512(US / Canada cars)Flip key; US Cascada uses 315 MHz, the Opel Cascada 433 MHz.
Check coverage first: support depends on the tool's software version and the exact model. A tool that is not shown here may still cover this car.
Frequently asked questions
Which keys fit the Buick Cascada 2017?
2 listings fit the Buick Cascada 2017: emergency blades and key blanks. Match the part number or FCC ID printed on your original key with the specifications on each listing.
Which transponder chip does the Buick Cascada 2017 key use?
The listings for this car carry: ID46 (HITAG 2). Check the chip in each listing's specifications.
Which blade profile does the Buick Cascada 2017 key use?
The blades listed for this car: HU100.
Which tools program a Buick Cascada 2017 key?
The tool makers' coverage lists name OBDSTAR Key Master G3 and Launch X-431 IMMO for this car; 1 of them lists all keys lost. Check your tool's latest coverage list before the job.
Can the Buick Cascada 2017 remote be programmed without a tool?
The remote is programmed on the car, without a tool. No working key is needed.

