Buick Encore 2016 Key Fob & Car Keys
Keys that fit the 2014–2016 Buick Encore: flip keys, remote keys and transponder keys, 3, 4 or 5 buttons, FCC ID 0HT01060512, ID46 (HITAG 2) or ID46E (GM extended) chip, 315 MHz. 9 compatible keys, remotes & shells (genuine and aftermarket) available for the 2016 Buick Encore.
Last updated: 15 November 2026
Key specifications for the Buick Encore 2014–2016
- Key types
- flip keys, remote keys, transponder keys, key shells and emergency blades
- Frequency
- 315 MHz
- Buttons
- 3-, 4- and 5-button
- Transponder chip
- ID46 (HITAG 2) · ID46E (GM extended)
- Blade profile
- HU100
- Part numbers
- For GM 13504199
- Battery
- CR2032
- Compatible FCC IDs
To pick the right part, match the part number or FCC ID printed on your original remote, or listed in the Buick parts catalogue, with the specifications on each listing. Every remote listed for the Buick Encore 2014–2016 transmits on 315 MHz.
A new smart key or remote has to be programmed to the car with a key programmer, and when every key is lost the programming is still done through the diagnostic port. We ship the key worldwide from the UAE by DHL and FedEx; any automotive locksmith or the dealer can cut and program it.
Programming the Buick Encore 2016 key
Key with a blade (regular or flip)
One tool lists this key.
- OBDSTAR Key Master G3
- Add key
- All keys lost
- Remote
reads the PIN by OBD
Programming steps
Add key - on the car(US / Canada cars)
Needs: With one programmed key, one programmed key, a new key cut to the car
- Insert the programmed key and turn it to ON/RUN.
- Turn it to LOCK/OFF and remove it.
- Within 5 seconds, insert the new key and turn it to ON/RUN. The security light goes off when the key is programmed.
- Repeat steps 1 to 3 for each extra key.
Add key - on the car(US / Canada cars)
Needs: No programmed key available, a new key cut to the car, the car switched off and every key to be programmed at hand
- Insert the new key in the ignition and turn it to ON/RUN. The security light comes on.
- Wait about 10 minutes until the security light goes off.
- Turn the ignition to LOCK/OFF.
- Repeat steps 1 to 3 two more times.
- After the third wait, turn the key to ON/RUN. The key is now learned.
Add key - on the car(US / Canada cars)
Needs: one working key, new key cut to the vehicle
- Cut the new key to the vehicle; have one key that already starts it.
- Put the working key in the ignition and turn it to ON/RUN (or start the engine), then turn it to LOCK/OFF and remove it.
- Within five seconds insert the new key and turn it to ON/RUN.
- The security light goes off when the key is learned (this can be too fast to notice).
- Start the engine with the new key; for each further key repeat from step 2.
All keys lost - on the car(US / Canada cars)
Needs: new key cut to the vehicle, 30 minutes
- Cut the new key. Have every key the customer keeps; the old keys stop working at the end.
- Insert the new key and turn to ON/RUN without cranking; the security light comes on.
- Wait about 10 minutes until the security light goes off, then turn to LOCK/OFF.
- Repeat ON/RUN, wait 10 minutes, LOCK/OFF two more times (about 30 minutes in all).
- After the third cycle turn to ON/RUN: this key is learned and every previously known key is erased.
- Learn the remaining keys with the add-key procedure.
Key type not stated by the list
One tool lists this key.
- Launch X-431 IMMO
- Add key
- All keys lost
Without a tool
The remote is programmed on the car, without a tool. It takes one working key.
When the key changed
Smart key (push to start)
- 2017 - 2021Chip: ID46315 MHzBlade: HU100FCC: HYQ4AA(US / Canada cars)Push-to-start trims only.
Key with a blade (regular or flip)
- 2013 - 2022This yearChip: ID46 Hitag2 Extended315 MHzBlade: HU100FCC: OHT01060512(US / Canada cars)Flip key; some 2013-2018 keys carry AVL-B01T1AC.
Check coverage first: support depends on the tool's software version and the exact model. A tool that is not shown here may still cover this car.
Frequently asked questions
Which keys fit the Buick Encore 2014–2016?
9 listings fit the Buick Encore 2014–2016: flip keys, remote keys, transponder keys, key shells and emergency blades, in 3-, 4- and 5-button versions. Match the part number or FCC ID printed on your original key with the specifications on each listing.
What frequency does the Buick Encore 2014–2016 remote use?
Every remote listed for the Buick Encore 2014–2016 transmits on 315 MHz.
Which transponder chip does the Buick Encore 2014–2016 key use?
The listings for this car carry: ID46 (HITAG 2) · ID46E (GM extended). Check the chip in each listing's specifications.
Which FCC IDs do Buick Encore 2014–2016 remotes carry?
The remotes listed for this car carry FCC ID 0HT01060512. Match it with the FCC ID printed on your original remote.
Which blade profile does the Buick Encore 2014–2016 key use?
The blades listed for this car: HU100.
Which tools program a Buick Encore 2014–2016 key?
The tool makers' coverage lists name OBDSTAR Key Master G3 and Launch X-431 IMMO for this car; 2 of them list all keys lost. Check your tool's latest coverage list before the job.
Can the Buick Encore 2014–2016 remote be programmed without a tool?
The remote is programmed on the car, without a tool. It takes one working key.








