Buick Lacrosse 2008 Key Fob & Car Keys
Keys that fit the 2005–2008 Buick Lacrosse: smart keys and remote keys, 4 or 5 buttons, FCC ID K0BGT04A, ID13 or T5 chip, 315 MHz. 4 compatible keys, remotes & shells (genuine and aftermarket) available for the 2008 Buick Lacrosse.
Last updated: 6 November 2026
Key specifications for the Buick Lacrosse 2005–2008
- Key types
- smart keys, remote keys and key shells
- Frequency
- 315 MHz
- Buttons
- 4- and 5-button
- Transponder chip
- ID13 · T5
- Part numbers
- 22733524
- Battery
- CR2032
- Compatible FCC IDs
To pick the right part, match the part number or FCC ID printed on your original remote, or listed in the Buick parts catalogue, with the specifications on each listing. Every remote listed for the Buick Lacrosse 2005–2008 transmits on 315 MHz.
A new smart key or remote has to be programmed to the car with a key programmer, and when every key is lost the programming is still done through the diagnostic port. We ship the key worldwide from the UAE by DHL and FedEx; any automotive locksmith or the dealer can cut and program it.
- $1.12In Stock
- $14.04In Stock
- Megamos ID13 Glass Transponder Chip Fixed Code - Honda Accord Civic CR-V, Acura, GM 1996-2009
SKU: B03533
$1.83In Stock
Programming the Buick Lacrosse 2008 key
Key with a blade (regular or flip)
2 tools list this key. 1 of them list all keys lost.
- OBDSTAR Key Master G3
- Add key
- All keys lost
- Remote
reads the PIN by OBD - Launch X-431 IMMO
- Add key
- Remote
All keys lost is listed by OBDSTAR Key Master G3. Launch X-431 IMMO lists add key only.
Programming steps
Add key - on the car(US / Canada cars)
Needs: one working programmed key, the new key, cut to the car
- Put a working programmed key in the ignition and start the engine.
- Once the engine runs, switch the key OFF and pull it out.
- Within 10 seconds of pulling the working key, insert the new key and turn it ON.
- The security light goes out once the new key is learned; learning can be so quick that you never see it come on.
- No security light (2004 to 2007 Grand Prix, Bonneville, Impala)? Wait 10 minutes 45 seconds to be sure the key is learned.
- Repeat the whole sequence for each extra key.
Add key - on the car(US / Canada cars)
Needs: one working key, new key cut to the vehicle
- Cut the new key to the vehicle; have one key that already starts it.
- Put the working key in the ignition and turn it to ON/RUN (or start the engine), then turn it to LOCK/OFF and remove it.
- Within five seconds insert the new key and turn it to ON/RUN.
- The security light goes off when the key is learned (this can be too fast to notice).
- Start the engine with the new key; for each further key repeat from step 2.
All keys lost - on the car(US / Canada cars)
Needs: new key cut to the vehicle, 30 minutes
- Cut the new key. Have every key the customer keeps; the old keys stop working at the end.
- Insert the new key and turn to ON/RUN without cranking; the security light comes on.
- Wait about 10 minutes until the security light goes off, then turn to LOCK/OFF.
- Repeat ON/RUN, wait 10 minutes, LOCK/OFF two more times (about 30 minutes in all).
- After the third cycle turn to ON/RUN: this key is learned and every previously known key is erased.
- Learn the remaining keys with the add-key procedure.
Without a tool
The remote is not programmed on the car by hand: it needs a tool or a dealer.
When the key changed
Smart key (push to start)
- 2010 - 2016Chip: ID46Blade: HU100(US / Canada cars)PEPS proximity flip key, push-to-start trims only.
- 2017 - 2019Chip: ID46433 MHzFCC: HYQ4EA(US / Canada cars)Push-to-start smart key, HYQ4EA (433 MHz).
Key with a blade (regular or flip)
- 2005 - 2009This yearChip: ID13Blade: B107(US / Canada cars)PASS-Key III key, PK3 stamped on the blade; Megamos 13 chip.
- 2010 - 2016Chip: ID46 Hitag2 Extended315 MHzBlade: HU100FCC: OHT01060512(US / Canada cars)Flip remote key; remote and transponder learn together.
Check coverage first: support depends on the tool's software version and the exact model. A tool that is not shown here may still cover this car.
Frequently asked questions
Which keys fit the Buick Lacrosse 2005–2008?
4 listings fit the Buick Lacrosse 2005–2008: smart keys, remote keys and key shells, in 4- and 5-button versions. Match the part number or FCC ID printed on your original key with the specifications on each listing.
What frequency does the Buick Lacrosse 2005–2008 remote use?
Every remote listed for the Buick Lacrosse 2005–2008 transmits on 315 MHz.
Which transponder chip does the Buick Lacrosse 2005–2008 key use?
The listings for this car carry: ID13 · T5. Check the chip in each listing's specifications.
Which FCC IDs do Buick Lacrosse 2005–2008 remotes carry?
The remotes listed for this car carry FCC ID K0BGT04A. Match it with the FCC ID printed on your original remote.
Which tools program a Buick Lacrosse 2005–2008 key?
The tool makers' coverage lists name OBDSTAR Key Master G3 and Launch X-431 IMMO for this car; 1 of them lists all keys lost. Check your tool's latest coverage list before the job.
Can the Buick Lacrosse 2005–2008 remote be programmed without a tool?
The remote is not programmed on the car by hand: it needs a tool or a dealer.



