Buick Park Avenue 2000 Key Fob & Car Keys
Keys that fit the 1997–2005 Buick Park Avenue: transponder keys, ID13 or T5 chip. 3 compatible keys, remotes & shells (genuine and aftermarket) available for the 2000 Buick Park Avenue.
Last updated: 6 November 2026
Key specifications for the Buick Park Avenue 1997–2005
- Key types
- transponder keys, key shells and emergency blades
- Transponder chip
- ID13 · T5
To pick the right part, match the part number or FCC ID printed on your original remote, or listed in the Buick parts catalogue, with the specifications on each listing.
A new smart key or remote has to be programmed to the car with a key programmer, and when every key is lost the programming is still done through the diagnostic port. We ship the key worldwide from the UAE by DHL and FedEx; any automotive locksmith or the dealer can cut and program it.
Programming the Buick Park Avenue 2000 key
Key with a blade (regular or flip)
2 tools list this key. 1 of them list all keys lost.
- OBDSTAR Key Master G3
- Add key
- All keys lost
- Remote
reads the PIN by OBD - Launch X-431 IMMO
- Add key
All keys lost is listed by OBDSTAR Key Master G3. Launch X-431 IMMO lists add key only.
Programming steps
Add key - on the car(US / Canada cars)
Needs: one working key, new key cut to the vehicle
- Cut the new key to the vehicle; have one key that already starts it.
- Start the engine with the working key, then turn it to LOCK/OFF and remove it.
- Within 10 seconds insert the new key and turn it to ON/RUN.
- The security light goes off when the key is learned (this can be too fast to notice).
- Start the engine with the new key; for each further key repeat from step 2.
All keys lost - on the car(US / Canada cars)
Needs: new key cut to the vehicle, 30 minutes
- Cut the new key. Have every key the customer keeps; the old keys stop working at the end.
- Insert the new key and turn to ON/RUN without cranking; the security light comes on.
- Wait about 10 minutes until the security light goes off, then turn to LOCK/OFF.
- Repeat ON/RUN, wait 10 minutes, LOCK/OFF two more times (about 30 minutes in all).
- After the third cycle turn to ON/RUN: this key is learned and every previously known key is erased.
- Learn the remaining keys with the add-key procedure.
When the key changed
Key with a blade (regular or flip)
- 1997 - 2005This yearChip: ID13Blade: B97(US / Canada cars)PASS-Key III key, PK3 stamped on the blade; Megamos 13 chip.
Check coverage first: support depends on the tool's software version and the exact model. A tool that is not shown here may still cover this car.
Frequently asked questions
Which keys fit the Buick Park Avenue 1997–2005?
3 listings fit the Buick Park Avenue 1997–2005: transponder keys, key shells and emergency blades. Match the part number or FCC ID printed on your original key with the specifications on each listing.
Which transponder chip does the Buick Park Avenue 1997–2005 key use?
The listings for this car carry: ID13 · T5. Check the chip in each listing's specifications.
Which tools program a Buick Park Avenue 1997–2005 key?
The tool makers' coverage lists name OBDSTAR Key Master G3 and Launch X-431 IMMO for this car; 1 of them lists all keys lost. Check your tool's latest coverage list before the job.


