Buick Verano 2017 Key Fob & Car Keys
Keys that fit the 2012–2017 Buick Verano: flip keys, remote keys and transponder keys, 3, 4 or 5 buttons, FCC ID 0HT01060512, ID46 (HITAG 2) chip, 315 MHz. 7 compatible keys, remotes & shells (genuine and aftermarket) available for the 2017 Buick Verano.
Last updated: 15 November 2026
Key specifications for the Buick Verano 2012–2017
- Key types
- flip keys, remote keys, transponder keys, key shells and emergency blades
- Frequency
- 315 MHz
- Buttons
- 3-, 4- and 5-button
- Transponder chip
- ID46 (HITAG 2)
- Blade profile
- HU100
- Battery
- CR2032
- Compatible FCC IDs
To pick the right part, match the part number or FCC ID printed on your original remote, or listed in the Buick parts catalogue, with the specifications on each listing. Every remote listed for the Buick Verano 2012–2017 transmits on 315 MHz.
A new smart key or remote has to be programmed to the car with a key programmer, and when every key is lost the programming is still done through the diagnostic port. We ship the key worldwide from the UAE by DHL and FedEx; any automotive locksmith or the dealer can cut and program it.
Programming the Buick Verano 2017 key
Smart key (push to start)
One tool lists this key.
- OBDSTAR Key Master G3
- Add key
- All keys lost
- Remote
reads the PIN by OBD
Programming steps
Add key - on the car(US / Canada cars)
Needs: Keyless Access cars, with two recognized transmitters, two recognized transmitters, the new transmitter with its key blade, the car switched off, with every transmitter (recognized and new) at hand
- Switch the car off.
- Place the two recognized transmitters near you.
- Insert the key blade in the driver's door lock and turn it to unlock five times within 12 seconds. The DIC shows READY FOR REMOTE #2, 3, 4 or 5.
- Place the new transmitter in the transmitter pocket inside the center console cupholder, buttons facing up (lift the liner out with a finger or a tool in the notch at its rear).
- Push ENGINE START/STOP. Once the fob is accepted, the cluster asks for the next one.
- Take the transmitter out and press UNLOCK.
- For each extra transmitter, repeat steps 4 to 6.
- When all are done, press and hold ENGINE START/STOP for at least 10 seconds to leave programming mode.
Add key - on the car(US / Canada cars)
Needs: Keyless Access cars, no recognized transmitter, every transmitter the customer keeps, each with its key blade, the car switched off, with every transmitter to be programmed at hand
- Insert the key blade in the driver's door lock and turn it to unlock five times within 10 seconds. The DIC shows REMOTE LEARN PENDING, PLEASE WAIT.
- Wait 10 minutes until the DIC shows PRESS ENGINE START BUTTON TO LEARN, then press ENGINE START/STOP. The DIC shows REMOTE LEARN PENDING, PLEASE WAIT again.
- Repeat the 10-minute wait and the button press two more times. After the third time the DIC shows READY FOR REMOTE #1.
- Place the new transmitter in the transmitter pocket inside the center console cupholder, buttons facing up (lift the liner out with a finger or a tool in the notch at its rear).
- Push ENGINE START/STOP. Once the fob is accepted, the cluster asks for the next one.
- Take the transmitter out and press UNLOCK.
- For each extra transmitter, repeat steps 4 to 6.
- When all are done, press and hold ENGINE START/STOP for at least 12 seconds to leave programming mode.
Key with a blade (regular or flip)
One tool lists this key.
- OBDSTAR Key Master G3
- Add key
- All keys lost
- Remote
reads the PIN by OBD
Programming steps
Add key - on the car(US / Canada cars)
Needs: Key cars, with two recognized keys, two programmed keys, a new key cut to the car
- Insert the first programmed key, turn it to ON/RUN, then to LOCK/OFF, and remove it.
- Within 5 seconds, insert the second programmed key, turn it to ON/RUN, then to LOCK/OFF, and remove it.
- Within 5 seconds, insert the new key and turn it to ON/RUN. The security light goes off when the key is programmed.
- Repeat all steps for each extra key.
Add key - on the car(US / Canada cars)
Needs: Key cars, no recognized key, a new key cut to the car, the car switched off and every key to be programmed at hand
- Insert the new key in the ignition and turn it to ON/RUN. The security light comes on.
- Wait about 10 minutes until the security light goes off.
- Turn the ignition to LOCK/OFF.
- Repeat steps 1 to 3 two more times.
- After the third wait, turn the key to ON/RUN. The key is now learned.
- For a second key, turn the ignition OFF, insert the second key and turn it ON. Turn it off, remove it and test both keys.
Add key - on the car(US / Canada cars)
Needs: two working keys, new key cut to the vehicle
- Cut the new key; have two different keys that already start the vehicle.
- Put the first working key in, turn to ON/RUN, then LOCK/OFF and remove it.
- Within five seconds put the second working key in, turn to ON/RUN, then LOCK/OFF and remove it.
- Within five seconds put the new key in and turn it to ON/RUN; the security light goes off when it is learned.
- Start the engine with the new key; repeat from step 2 for each further key.
Key type not stated by the list
One tool lists this key.
- Launch X-431 IMMO
- Add key
Without a tool
The remote is programmed on the car, without a tool.
When the key changed
Smart key (push to start)
- 2012 - 2017This yearChip: ID46Blade: HU100(US / Canada cars)PEPS proximity flip key, push-to-start trims only.
Key with a blade (regular or flip)
- 2012 - 2017This yearChip: ID46 Hitag2 Extended315 MHzBlade: HU100FCC: OHT01060512(US / Canada cars)Flip remote key; remote and transponder learn together.
Check coverage first: support depends on the tool's software version and the exact model. A tool that is not shown here may still cover this car.
Frequently asked questions
Which keys fit the Buick Verano 2012–2017?
7 listings fit the Buick Verano 2012–2017: flip keys, remote keys, transponder keys, key shells and emergency blades, in 3-, 4- and 5-button versions. Match the part number or FCC ID printed on your original key with the specifications on each listing.
What frequency does the Buick Verano 2012–2017 remote use?
Every remote listed for the Buick Verano 2012–2017 transmits on 315 MHz.
Which transponder chip does the Buick Verano 2012–2017 key use?
The listings for this car carry: ID46 (HITAG 2). Check the chip in each listing's specifications.
Which FCC IDs do Buick Verano 2012–2017 remotes carry?
The remotes listed for this car carry FCC ID 0HT01060512. Match it with the FCC ID printed on your original remote.
Which blade profile does the Buick Verano 2012–2017 key use?
The blades listed for this car: HU100.
Which tools program a Buick Verano 2012–2017 key?
The tool makers' coverage lists name OBDSTAR Key Master G3 and Launch X-431 IMMO for this car; 1 of them lists all keys lost. Check your tool's latest coverage list before the job.
Can the Buick Verano 2012–2017 remote be programmed without a tool?
The remote is programmed on the car, without a tool.






