Cadillac CT6 2019 Key Fob & Car Keys
Keys that fit the 2018–2019 Cadillac CT6: smart keys, 5 buttons, FCC ID HYQ2AB, HYQ2EB or HYQ2ES, ID46 (HITAG 2) chip, 433 MHz. 10 compatible keys, remotes & shells (genuine and aftermarket) available for the 2019 Cadillac CT6.
Last updated: 17 November 2026
Key specifications for the Cadillac CT6 2018–2019
- Key types
- smart keys, key shells and emergency blades
- Frequency
- 433 MHz
- Buttons
- 5-button
- Transponder chip
- ID46 (HITAG 2)
- Blade profile
- HU100
- Battery
- CR2032
To pick the right part, match the part number or FCC ID printed on your original remote, or listed in the Cadillac parts catalogue, with the specifications on each listing. Every remote listed for the Cadillac CT6 2018–2019 transmits on 433 MHz.
A new smart key or remote has to be programmed to the car with a key programmer, and when every key is lost the programming is still done through the diagnostic port. We ship the key worldwide from the UAE by DHL and FedEx; any automotive locksmith or the dealer can cut and program it.
- Cadillac ATS ATS-V CT6 CTS XTS 2015-2020 Smart Key 5-button 433MHz - 13598538 - Aftermarket · New
SKU: B01439
$18.26In Stock - Cadillac Escalade CTS XT5 2014-2021 Emergency Key Blade HU100 - 22984994 - Aftermarket · New
SKU: B01448
$2.25In Stock
Programming the Cadillac CT6 2019 key
Smart key (push to start)
4 tools list this key. 3 of them list all keys lost.
- OBDSTAR Key Master G3
- Add key
- All keys lost
- Remote
reads the PIN by OBD - Add key
- All keys lost
PIN read function- XTOOL X100 PAD3 / X100 MAX
- Add key
- All keys lost
PIN read function - Universal key
Programming steps
Add key - on the car(US / Canada cars)
Needs: With two recognized transmitters, two recognized transmitters, the new transmitter with its key blade, the car switched off, with every transmitter (recognized and new) at hand
- Switch the car off.
- Slide the key blade out of the transmitter.
- Place the two recognized transmitters in the cupholder.
- Remove the lock cylinder cap on the driver's door handle.
- Insert the key blade in the driver's door lock and turn it counterclockwise to unlock five times within 10 seconds. The DIC shows READY TO LEARN ELECTRONIC KEY #2, 3, 4, ETC.
- Place the new transmitter in the transmitter pocket (open the center console storage to reach it).
- Push ENGINE START/STOP. Once the fob is accepted, the cluster asks for the next one.
- Take the transmitter out and press UNLOCK or LOCK.
- For each extra transmitter, repeat steps 6 to 8.
- When all are done, press and hold ENGINE START/STOP for about 12 seconds to leave programming mode.
- Put the key blade back into the transmitter.
Add key - on the car(US / Canada cars)
Needs: Two recognized transmitters not available, every transmitter the customer keeps, each with its key blade, the car switched off, with every transmitter to be programmed at hand
- Slide the key blade out of the transmitter.
- Remove the lock cylinder cap on the driver's door handle.
- Insert the key blade in the driver's door lock and turn it counterclockwise to unlock five times within 10 seconds. The DIC shows REMOTE LEARN PENDING, PLEASE WAIT.
- Wait 10 minutes until the DIC shows PRESS ENGINE START BUTTON TO LEARN, then press ENGINE START/STOP. The DIC shows REMOTE LEARN PENDING, PLEASE WAIT again.
- Repeat the 10-minute wait and the button press two more times. After the third time the DIC shows READY FOR REMOTE #1.
- Place the new transmitter in the transmitter pocket (open the center console storage to reach it).
- Push ENGINE START/STOP. Once the fob is accepted, the cluster asks for the next one.
- Take the transmitter out and press UNLOCK or LOCK.
- For each extra transmitter, repeat steps 6 to 8.
- When all are done, press and hold ENGINE START/STOP for about 12 seconds to leave programming mode.
- Put the key blade back into the transmitter.
Add key - on the car(US / Canada cars)
Needs: two working smart keys, new smart key
- Have the vehicle off and every smart key (two working ones and the new ones) with you.
- Put the two working smart keys in the cupholder (or the place the owner's manual names).
- Remove the key blade, insert it in the driver door lock cylinder and turn to unlock five times within 10 seconds; the DIC shows READY FOR REMOTE #2, 3...
- Place the new smart key in the transmitter pocket and press ENGINE START/STOP; the DIC shows it is ready for the next one.
- Take the key out of the pocket and press lock or unlock on it.
- Repeat steps 4-5 for each new key, then hold ENGINE START/STOP about 12 seconds to leave programming mode.
All keys lost - on the car(US / Canada cars)
Needs: every smart key to be kept, 30 minutes
- Have every smart key the customer keeps with you; the blade of the new key must be cut if no key works.
- With the vehicle off, insert the key blade in the driver door lock cylinder and turn to unlock five times within 10 seconds; the DIC shows REMOTE LEARN PENDING, PLEASE WAIT.
- Wait about 10 minutes until the DIC shows PRESS ENGINE START BUTTON TO LEARN, then press ENGINE START/STOP.
- Repeat the 10-minute wait and button press two more times (about 30 minutes in all); the DIC then shows READY FOR REMOTE #1.
- Place a smart key in the transmitter pocket and press ENGINE START/STOP; the DIC moves to the next number.
- Take it out, press lock or unlock, and repeat for every key the customer keeps.
- Hold ENGINE START/STOP about 12 seconds to leave programming mode, then test every key.
Key type not stated by the list
One tool lists this key.
- Launch X-431 IMMO
- Add key
Without a tool
The remote is programmed on the car, without a tool. Up to 8 remotes.
When the key changed
Smart key (push to start)
- 2016 - 2020This yearChip: ID46433 MHzBlade: HU100FCC: HYQ2EBBuilt to 2020 only; later years on the site have no car.
Check coverage first: support depends on the tool's software version and the exact model. A tool that is not shown here may still cover this car.
Frequently asked questions
Which keys fit the Cadillac CT6 2018–2019?
10 listings fit the Cadillac CT6 2018–2019: smart keys, key shells and emergency blades, in 5-button versions. Match the part number or FCC ID printed on your original key with the specifications on each listing.
What frequency does the Cadillac CT6 2018–2019 remote use?
Every remote listed for the Cadillac CT6 2018–2019 transmits on 433 MHz.
Which transponder chip does the Cadillac CT6 2018–2019 key use?
The listings for this car carry: ID46 (HITAG 2). Check the chip in each listing's specifications.
Which FCC IDs do Cadillac CT6 2018–2019 remotes carry?
The remotes listed for this car carry FCC ID HYQ2AB, HYQ2EB and HYQ2ES. Match it with the FCC ID printed on your original remote.
Which blade profile does the Cadillac CT6 2018–2019 key use?
The blades listed for this car: HU100.
Which tools program a Cadillac CT6 2018–2019 key?
The tool makers' coverage lists name OBDSTAR Key Master G3, Lonsdor K518, XTOOL X100 PAD3 / X100 MAX, Autel KM100 (IKEY universal smart key) and Launch X-431 IMMO for this car; 3 of them list all keys lost. Check your tool's latest coverage list before the job.
Can the Cadillac CT6 2018–2019 remote be programmed without a tool?
The remote is programmed on the car, without a tool. Up to 8 remotes.









