Skip to content

Cadillac CTS 2019 Key Fob & Car Keys

Keys that fit the 2019 Cadillac CTS: smart keys, 4 or 5 buttons, FCC ID HYQ2AB, HYQ2EB or HYQ2ES, ID46 (HITAG 2) chip, 315 MHz or 433 MHz. 17 compatible keys, remotes & shells (genuine and aftermarket) available for the 2019 Cadillac CTS.

Last updated: 17 November 2026

Key specifications for the Cadillac CTS 2019

Key types
smart keys, key shells and emergency blades
Frequency
315 MHz and 433 MHz
Buttons
4- and 5-button
Transponder chip
ID46 (HITAG 2)
Blade profile
HU100
Battery
CR2032
Compatible FCC IDs

To pick the right part, match the part number or FCC ID printed on your original remote, or listed in the Cadillac parts catalogue, with the specifications on each listing. The frequency depends on the market the car was sold in, so check 315 MHz and 433 MHz against your original before ordering.

A new smart key or remote has to be programmed to the car with a key programmer, and when every key is lost the programming is still done through the diagnostic port. We ship the key worldwide from the UAE by DHL and FedEx; any automotive locksmith or the dealer can cut and program it.

Programming the Cadillac CTS 2019 key

Smart key (push to start)

6 tools list this key. 3 of them list all keys lost.

Programming steps

Add key - on the car(US / Canada cars)

Needs: With two recognized transmitters, two recognized transmitters, the new transmitter with its key blade, the car switched off, with every transmitter (recognized and new) at hand

  1. Switch the car off.
  2. Slide the key blade out of the transmitter.
  3. Place the two recognized transmitters in the cupholder.
  4. Remove the lock cylinder cap on the driver's door handle.
  5. Insert the key blade in the driver's door lock and turn it counterclockwise to unlock five times within 10 seconds. The DIC shows READY FOR REMOTE #2, 3, 4, ETC.
  6. Place the new transmitter in the transmitter pocket in the center console (open it and remove the rubber mat).
  7. Push ENGINE START/STOP. Once the fob is accepted, the cluster asks for the next one.
  8. Take the transmitter out and press UNLOCK or LOCK.
  9. For each extra transmitter, repeat steps 6 to 8.
  10. When all are done, press and hold ENGINE START/STOP for about 12 seconds to leave programming mode.
  11. Put the key blade back into the transmitter.
Watch out: Turn the door key five times within 10 seconds, or the car does not enter programming mode.
Add key - on the car(US / Canada cars)

Needs: Two recognized transmitters not available, every transmitter the customer keeps, each with its key blade, the car switched off, with every transmitter to be programmed at hand

  1. Slide the key blade out of the transmitter.
  2. Remove the lock cylinder cap on the driver's door handle.
  3. Insert the key blade in the driver's door lock and turn it counterclockwise to unlock five times within 10 seconds. The DIC shows REMOTE LEARN PENDING, PLEASE WAIT.
  4. Wait 10 minutes until the DIC shows PRESS ENGINE START BUTTON TO LEARN, then press ENGINE START/STOP. The DIC shows REMOTE LEARN PENDING, PLEASE WAIT again.
  5. Repeat the 10-minute wait and the button press two more times. After the third time the DIC shows READY FOR REMOTE #1.
  6. Place the new transmitter in the transmitter pocket in the center console (open it and remove the rubber mat).
  7. Push ENGINE START/STOP. Once the fob is accepted, the cluster asks for the next one.
  8. Take the transmitter out and press UNLOCK or LOCK.
  9. For each extra transmitter, repeat steps 6 to 8.
  10. When all are done, press and hold ENGINE START/STOP for about 12 seconds to leave programming mode.
  11. Put the key blade back into the transmitter.
Watch out: After the third wait, every previously known transmitter stops working: program all of them again. Takes about 30 minutes. Up to eight transmitters can be programmed. Not available on Canadian cars.
Add key - on the car(US / Canada cars)

Needs: two working smart keys, new smart key

  1. Have the vehicle off and every smart key (two working ones and the new ones) with you.
  2. Put the two working smart keys in the cupholder (or the place the owner's manual names).
  3. Remove the key blade, insert it in the driver door lock cylinder and turn to unlock five times within 10 seconds; the DIC shows READY FOR REMOTE #2, 3...
  4. Place the new smart key in the transmitter pocket and press ENGINE START/STOP; the DIC shows it is ready for the next one.
  5. Take the key out of the pocket and press lock or unlock on it.
  6. Repeat steps 4-5 for each new key, then hold ENGINE START/STOP about 12 seconds to leave programming mode.
Watch out: From 2017 the quick learn needs two learned keys.
All keys lost - on the car(US / Canada cars)

Needs: every smart key to be kept, 30 minutes

  1. Have every smart key the customer keeps with you; the blade of the new key must be cut if no key works.
  2. With the vehicle off, insert the key blade in the driver door lock cylinder and turn to unlock five times within 10 seconds; the DIC shows REMOTE LEARN PENDING, PLEASE WAIT.
  3. Wait about 10 minutes until the DIC shows PRESS ENGINE START BUTTON TO LEARN, then press ENGINE START/STOP.
  4. Repeat the 10-minute wait and button press two more times (about 30 minutes in all); the DIC then shows READY FOR REMOTE #1.
  5. Place a smart key in the transmitter pocket and press ENGINE START/STOP; the DIC moves to the next number.
  6. Take it out, press lock or unlock, and repeat for every key the customer keeps.
  7. Hold ENGINE START/STOP about 12 seconds to leave programming mode, then test every key.
Watch out: After the third cycle every previously known smart key is erased: relearn all of them in the same session. Not available in Canada (owner's manual).

Key type not stated by the list

One tool lists this key.

  • Launch X-431 IMMO
    • Add key

Without a tool

The remote is programmed on the car, without a tool. Up to 8 remotes.

When the key changed

Smart key (push to start)

  • 2008 - 2015Chip: ID46315 MHzFCC: M3N5WY7777A(US / Canada cars)Keyless access cars; start with the ignition control knob.
  • 2014 - 2019This yearChip: ID46Blade: HU100FCC: HYQ2AB, HYQ2EBHYQ2AB is 315 MHz, HYQ2EB is 433 MHz: read the FCC ID.

Key with a blade (regular or flip)

  • 2008 - 2013Chip: ID46Blade: B111(US / Canada cars)Key-start cars without keyless access.

Check coverage first: support depends on the tool's software version and the exact model. A tool that is not shown here may still cover this car.

Frequently asked questions

Which keys fit the Cadillac CTS 2019?

17 listings fit the Cadillac CTS 2019: smart keys, key shells and emergency blades, in 4- and 5-button versions. Match the part number or FCC ID printed on your original key with the specifications on each listing.

What frequency does the Cadillac CTS 2019 remote use?

Listings for the Cadillac CTS 2019 come in 315 MHz and 433 MHz: the frequency depends on the market the car was sold in, so check it against your original remote before ordering.

Which transponder chip does the Cadillac CTS 2019 key use?

The listings for this car carry: ID46 (HITAG 2). Check the chip in each listing's specifications.

Which FCC IDs do Cadillac CTS 2019 remotes carry?

The remotes listed for this car carry FCC ID HYQ2AB, HYQ2EB and HYQ2ES. Match it with the FCC ID printed on your original remote.

Which blade profile does the Cadillac CTS 2019 key use?

The blades listed for this car: HU100.

Which tools program a Cadillac CTS 2019 key?

The tool makers' coverage lists name OBDSTAR Key Master G3, Lonsdor K518, XTOOL X100 PAD3 / X100 MAX, Autel KM100 (IKEY universal smart key), Xhorse VVDI Key Tool Max and Xhorse VVDI Key Tool Plus for this car; 3 of them list all keys lost. Check your tool's latest coverage list before the job.

Can the Cadillac CTS 2019 remote be programmed without a tool?

The remote is programmed on the car, without a tool. Up to 8 remotes.