Skip to content

Cadillac Deville 2000 Key Fob & Car Keys

2 compatible keys, remotes & shells (genuine and aftermarket) available for the 2000 Cadillac Deville.

Last updated: 6 November 2026

Key specifications for the Cadillac Deville 2000

Transponder chip
ID13 · T5

To pick the right part, match the part number or FCC ID printed on your original remote, or listed in the Cadillac parts catalogue, with the specifications on each listing.

Shells and blades reuse the original electronics, and a blade needs cutting by a locksmith. We ship worldwide from the UAE by DHL and FedEx.

Programming the Cadillac Deville 2000 key

Key with a blade (regular or flip)

3 tools list this key. 2 of them list all keys lost.

  • OBDSTAR Key Master G3
    • Add key
    • All keys lost
    • Remote
    reads the PIN by OBD
  • XTOOL X100 PAD3 / X100 MAX
    • Add key
    • All keys lost
    PIN read function
  • Launch X-431 IMMO
    • Add key

All keys lost is listed by OBDSTAR Key Master G3 and XTOOL X100 PAD3 / X100 MAX. Launch X-431 IMMO lists add key only.

Programming steps

Add key - on the car(US / Canada cars)

Needs: one working key, new key cut to the vehicle

  1. Cut the new key to the vehicle; have one key that already starts it.
  2. Start the engine with the working key, then turn it to LOCK/OFF and remove it.
  3. Within 10 seconds insert the new key and turn it to ON/RUN.
  4. The security light goes off when the key is learned (this can be too fast to notice).
  5. Start the engine with the new key; for each further key repeat from step 2.
Watch out: Adds only; never erases keys. Up to 10 keys.
All keys lost - on the car(US / Canada cars)

Needs: new key cut to the vehicle, 30 minutes

  1. Cut the new key. Have every key the customer keeps; the old keys stop working at the end.
  2. Insert the new key and turn to ON/RUN without cranking; the security light comes on.
  3. Wait about 10 minutes until the security light goes off, then turn to LOCK/OFF.
  4. Repeat ON/RUN, wait 10 minutes, LOCK/OFF two more times (about 30 minutes in all).
  5. After the third cycle turn OFF, then start the engine with this key: it is learned and every previously known key is erased.
  6. Learn the remaining keys with the add-key procedure.
Watch out: All previously learned keys are erased. Use a master (black) key for the relearn, never a valet key. U.S. only: GM's manuals say Canadian owners must use the dealer.

Without a tool

The remote is not programmed on the car by hand: it needs a tool or a dealer.

When the key changed

Key with a blade (regular or flip)

  • 2000 - 2005This yearChip: ID13Blade: B99(US / Canada cars)PASS-Key III key, PK3 stamped on the blade; Megamos 13 chip.

Check coverage first: support depends on the tool's software version and the exact model. A tool that is not shown here may still cover this car.

Frequently asked questions

Which transponder chip does the Cadillac Deville 2000 key use?

The listings for this car carry: ID13 · T5. Check the chip in each listing's specifications.

Which tools program a Cadillac Deville 2000 key?

The tool makers' coverage lists name OBDSTAR Key Master G3, XTOOL X100 PAD3 / X100 MAX and Launch X-431 IMMO for this car; 2 of them list all keys lost. Check your tool's latest coverage list before the job.

Can the Cadillac Deville 2000 remote be programmed without a tool?

The remote is not programmed on the car by hand: it needs a tool or a dealer.