Cadillac ELR 2014 Key Fob & Car Keys
Keys that fit the 2014 Cadillac ELR: smart keys, 5 buttons, FCC ID NBG009768T, ID46 (HITAG 2) chip, 315 MHz. 2 compatible keys, remotes & shells (genuine and aftermarket) available for the 2014 Cadillac ELR.
Last updated: 29 October 2026
Key specifications for the Cadillac ELR 2014
- Key types
- smart keys
- Frequency
- 315 MHz
- Buttons
- 5-button
- Transponder chip
- ID46 (HITAG 2)
- Blade profile
- HU100
- Battery
- CR2032
- Compatible FCC IDs
To pick the right part, match the part number or FCC ID printed on your original remote, or listed in the Cadillac parts catalogue, with the specifications on each listing. Every remote listed for the Cadillac ELR 2014 transmits on 315 MHz.
A new smart key or remote has to be programmed to the car with a key programmer, and when every key is lost the programming is still done through the diagnostic port. We ship the key worldwide from the UAE by DHL and FedEx; any automotive locksmith or the dealer can cut and program it.
- $2.80In Stock
- $21.07In Stock
Programming the Cadillac ELR 2014 key
Smart key (push to start)
3 tools list this key. 2 of them list all keys lost.
- OBDSTAR Key Master G3
- Add key
- All keys lost
- Remote
reads the PIN by OBD - XTOOL X100 PAD3 / X100 MAX
- Add key
- All keys lost
PIN read function - Universal key
Programming steps
Add key - on the car(US / Canada cars)
Needs: With one recognized smart key, one working (recognized) smart key, every new smart key to add
- Turn the car off, slide the key base (blade) out of the recognized smart key and set that key in the cupholder.
- Put the blade in the key cylinder above the license plate and open the trunk.
- Within 10 seconds, give the key five clockwise turns. The cluster reads READY FOR REMOTE KEY 3 or 4, up to 8.
- Put the new smart key on the indent in the center console storage bin (lift the rubber liner first).
- Press POWER. The DIC moves on to READY FOR REMOTE KEY 4 or 5, up to 8.
- Press UNLOCK or LOCK on each newly programmed key.
- For each extra smart key, repeat steps 4 to 6, then slide the key base back into the smart key.
- Hold POWER for at least 12 seconds to leave programming mode.
Add key - on the car(US / Canada cars)
Needs: No recognized smart key (US cars), every smart key the customer keeps, old and new, about 30 minutes with the car off
- Slide the blade out of the smart key, put it in the key cylinder above the license plate and open the trunk.
- Within 10 seconds, give the key five clockwise turns. The cluster reads REMOTE LEARN PENDING PLEASE WAIT.
- Slide the key base back into the smart key.
- Wait 10 minutes until the DIC shows PRESS ENGINE START BUTTON LEARN, then press POWER. The DIC goes back to REMOTE LEARN PENDING, PLEASE WAIT.
- Do step 4 two more times (three waits in total). After the third press every old key is erased and the DIC shows READY FOR REMOTE #1.
- Put the smart key on the indent in the center console storage bin (lift the rubber liner first).
- Press POWER. Once the key is learned, the DIC asks for the next one.
- Take the key out and press LOCK or UNLOCK on it.
- Repeat steps 6 to 8 for every other key, the customer's old keys included.
- When done, hold POWER for about 12 seconds to leave programming mode.
Add key - on the car(US / Canada cars)
Needs: one working smart key, new smart key
- Have the vehicle off and both the working smart key and the new one with you.
- Take the key blade out of the working smart key and put that smart key in the cupholder.
- Insert the blade in the key cylinder above the rear license plate, open the trunk and turn the key five times within 10 seconds; the DIC shows READY FOR REMOTE KEY with the next number.
- Lift the rubber liner in the center console storage bin, place the new smart key on the indent and press POWER; the DIC moves to the next number.
- Press lock or unlock on the new smart key.
- Repeat steps 4-5 for each new key, then hold POWER at least 12 seconds to leave programming mode; refit the key blade.
All keys lost - on the car(US / Canada cars)
Needs: every smart key to be kept, 30 minutes
- Have every smart key the customer keeps with you; the blade of the new key must be cut if no key works.
- With the vehicle off, insert the key blade in the key cylinder above the rear license plate, open the trunk and turn the key five times within 10 seconds; the DIC shows REMOTE LEARN PENDING, PLEASE WAIT.
- Wait about 10 minutes until the DIC shows PRESS ENGINE START BUTTON TO LEARN, then press POWER.
- Repeat the 10-minute wait and button press two more times (about 30 minutes in all); the DIC then shows READY FOR REMOTE #1.
- Place a smart key on the indent in the center console storage bin (rubber liner lifted) and press POWER; the DIC moves to the next number.
- Take it out, press lock or unlock, and repeat for every key the customer keeps.
- Hold POWER about 12 seconds to leave programming mode, then test every key.
Key type not stated by the list
One tool lists this key.
- Launch X-431 IMMO
- Add key
Without a tool
The remote is programmed on the car, without a tool. Up to 8 remotes.
When the key changed
Smart key (push to start)
- 2014 - 2016This yearChip: ID46315 MHzFCC: NBG009768T, NBGG093UCC(US / Canada cars)NBG009768T or NBGG093UCC (2015-2016 cars): read the FCC ID.
Check coverage first: support depends on the tool's software version and the exact model. A tool that is not shown here may still cover this car.
Frequently asked questions
Which keys fit the Cadillac ELR 2014?
2 listings fit the Cadillac ELR 2014: smart keys, in 5-button versions. Match the part number or FCC ID printed on your original key with the specifications on each listing.
What frequency does the Cadillac ELR 2014 remote use?
Every remote listed for the Cadillac ELR 2014 transmits on 315 MHz.
Which transponder chip does the Cadillac ELR 2014 key use?
The listings for this car carry: ID46 (HITAG 2). Check the chip in each listing's specifications.
Which FCC IDs do Cadillac ELR 2014 remotes carry?
The remotes listed for this car carry FCC ID NBG009768T. Match it with the FCC ID printed on your original remote.
Which blade profile does the Cadillac ELR 2014 key use?
The blades listed for this car: HU100.
Which tools program a Cadillac ELR 2014 key?
The tool makers' coverage lists name OBDSTAR Key Master G3, XTOOL X100 PAD3 / X100 MAX, Autel KM100 (IKEY universal smart key) and Launch X-431 IMMO for this car; 2 of them list all keys lost. Check your tool's latest coverage list before the job.
Can the Cadillac ELR 2014 remote be programmed without a tool?
The remote is programmed on the car, without a tool. Up to 8 remotes.

