Skip to content

Cadillac STS 2011 Key Fob & Car Keys

Keys that fit the 2008–2011 Cadillac STS: smart keys and transponder keys, 5 buttons, FCC ID M3N5WY7777A or NBG009768T, ID46 (HITAG 2) chip, 315 MHz. 5 compatible keys, remotes & shells (genuine and aftermarket) available for the 2011 Cadillac STS.

Last updated: 15 November 2026

Key specifications for the Cadillac STS 2008–2011

Key types
smart keys, transponder keys, key shells and emergency blades
Frequency
315 MHz
Buttons
5-button
Transponder chip
ID46 (HITAG 2)
Battery
CR2032
Compatible FCC IDs

To pick the right part, match the part number or FCC ID printed on your original remote, or listed in the Cadillac parts catalogue, with the specifications on each listing. Every remote listed for the Cadillac STS 2008–2011 transmits on 315 MHz.

A new smart key or remote has to be programmed to the car with a key programmer, and when every key is lost the programming is still done through the diagnostic port. We ship the key worldwide from the UAE by DHL and FedEx; any automotive locksmith or the dealer can cut and program it.

Programming the Cadillac STS 2011 key

Smart key (push to start)

5 tools list this key. 2 of them list all keys lost.

Programming steps

Add key - on the car(US / Canada cars)

Needs: With one recognized smart key, one working (recognized) smart key, every new smart key to add

  1. Turn the car off and keep the recognized smart key and the new one with you.
  2. Put the key blade in the driver door lock and turn it to UNLOCK five times within 5 seconds. The DIC shows READY TO LEARN ELECTRONIC KEY #2, 3 or 4.
  3. Put the new smart key in the transmitter pocket in the center console between the front seats, buttons facing the front of the car.
  4. A chime means the key is stored. The cluster then reads READY TO LEARN ELECTRONIC KEY #3 or 4, or MAXIMUM # ELECTRONIC KEYS LEARNED.
  5. Press the ignition control knob to leave programming mode.
  6. Take the key out of the pocket and press UNLOCK on it twice.
  7. For each extra smart key, repeat steps 3 to 6.
Watch out: The car must be off. Canadian cars need two recognized smart keys for this method. Up to 4 smart keys can be programmed.
Add key - on the car(US / Canada cars)

Needs: No recognized smart key (US cars), every smart key the customer keeps, old and new, about 30 minutes with the car off

  1. Turn the car off and put the new smart key in the transmitter pocket in the center console between the front seats, buttons facing the front of the car.
  2. Put the key blade in the driver door lock and turn it to UNLOCK five times within 5 seconds. The DIC shows PRESS START CONTROL TO LEARN KEYS.
  3. Push the ignition switch in. The DIC shows LEARN DELAY ACTIVE WAIT XX MIN and counts down to zero.
  4. When the DIC asks again with PRESS START CONTROL TO LEARN KEYS, push the ignition switch in again and wait for the next countdown.
  5. Do step 4 once more (three presses and three 10-minute countdowns in total).
  6. After the last countdown a beep sounds and the DIC shows READY TO LEARN ELECTRONIC KEY # X. Every old key is now erased.
  7. A beep confirms the key in the pocket is learned. The DIC shows READY TO LEARN ELECTRONIC KEY # 2.
  8. For each extra key, put it in the pocket until it beeps and the DIC moves to the next number. At 4 keys the DIC shows MAXIMUM # ELECTRONIC KEYS LEARNED and leaves programming mode.
  9. Press the ignition control knob when you are done.
  10. Press UNLOCK on each newly programmed key to finish.
Watch out: This erases every stored smart key; program all keys the customer keeps. Takes three 10-minute countdowns with the car off. Up to 4 smart keys can be programmed. US cars only: Canadian cars need a dealer when two recognized keys are not available.
Add key - on the car(US / Canada cars)

Needs: one working transmitter, new transmitter (key blade cut)

  1. Have the vehicle off and every transmitter (working and new) with you.
  2. Insert the key in the driver door lock and turn to unlock five times within five seconds; the DIC shows READY FOR FOB #2, 3 or 4.
  3. Place the new transmitter in the pocket inside the center console bin, buttons facing the front of the car; a beep confirms it is learned.
  4. The DIC shows the next number or MAX # FOBS LEARNED; take the transmitter out and press unlock on it two times.
  5. Repeat steps 3-4 for each further transmitter, then press ACC on the ignition switch to leave programming mode.
Watch out: Up to four transmitters. Canadian cars need two recognized transmitters (owner's manual).
All keys lost - on the car(US / Canada cars)

Needs: every transmitter to be kept, 30 minutes

  1. Have every transmitter the customer keeps with you; cut the key blade if no transmitter works. The vehicle must be off.
  2. Place a new transmitter in the console bin pocket, buttons facing the front of the car.
  3. Insert the key in the driver door lock and turn to unlock five times within five seconds; the DIC shows OFF-ACCESSORY TO LEARN.
  4. Press the OFF/ACC button of the ignition switch; the DIC shows WAIT 10 MINUTES and counts down.
  5. Each time OFF-ACCESSORY TO LEARN shows again, press OFF/ACC; three 10-minute waits in all (about 30 minutes).
  6. After the third wait a beep sounds and the DIC shows READY FOR FOB #1, then READY FOR FOB #2 once the fob in the pocket is learned; every older fob is now erased.
  7. Swap in each further transmitter until it beeps (up to four).
  8. Press unlock two times on each newly programmed transmitter.
Watch out: Every previously learned transmitter is erased. Up to four transmitters. Not available in Canada (owner's manual).

Key with a blade (regular or flip)

2 tools list this key. 1 of them list all keys lost.

All keys lost is listed by Lonsdor K518. Launch X-431 IMMO lists add key only.

Without a tool

The remote is programmed on the car, without a tool. No working key is needed. Up to 4 remotes.

When the key changed

Smart key (push to start)

  • 2005 - 2007Chip: ID46315 MHzFCC: M3N65981403First STS keyless access fob; not the 2008-on fob.
  • 2008 - 2011This yearChip: ID46315 MHzFCC: M3N5WY7777ASame M3N5WY7777A fob as the 2008-2015 CTS.

Check coverage first: support depends on the tool's software version and the exact model. A tool that is not shown here may still cover this car.

Frequently asked questions

Which keys fit the Cadillac STS 2008–2011?

5 listings fit the Cadillac STS 2008–2011: smart keys, transponder keys, key shells and emergency blades, in 5-button versions. Match the part number or FCC ID printed on your original key with the specifications on each listing.

What frequency does the Cadillac STS 2008–2011 remote use?

Every remote listed for the Cadillac STS 2008–2011 transmits on 315 MHz.

Which transponder chip does the Cadillac STS 2008–2011 key use?

The listings for this car carry: ID46 (HITAG 2). Check the chip in each listing's specifications.

Which FCC IDs do Cadillac STS 2008–2011 remotes carry?

The remotes listed for this car carry FCC ID M3N5WY7777A and NBG009768T. Match it with the FCC ID printed on your original remote.

Which tools program a Cadillac STS 2008–2011 key?

The tool makers' coverage lists name OBDSTAR Key Master G3, XTOOL X100 PAD3 / X100 MAX, Autel KM100 (IKEY universal smart key), Xhorse VVDI Key Tool Max, Xhorse VVDI Key Tool Plus and Lonsdor K518 for this car; 3 of them list all keys lost. Check your tool's latest coverage list before the job.

Can the Cadillac STS 2008–2011 remote be programmed without a tool?

The remote is programmed on the car, without a tool. No working key is needed. Up to 4 remotes.