Skip to content

Cadillac XLR 2009 Key Fob & Car Keys

1 compatible key, remote & shell (genuine and aftermarket) available for the 2009 Cadillac XLR.

Last updated: 2 October 2026

Key specifications for the Cadillac XLR 2008–2009

Compatible FCC IDs

To pick the right part, match the part number or FCC ID printed on your original remote, or listed in the Cadillac parts catalogue, with the specifications on each listing.

Shells and blades reuse the original electronics, and a blade needs cutting by a locksmith. We ship worldwide from the UAE by DHL and FedEx.

Programming the Cadillac XLR 2009 key

Smart key (push to start)

5 tools list this key. 1 of them list all keys lost.

Programming steps

Add key - on the car(US / Canada cars)

Needs: With one recognized smart key, one working (recognized) smart key, every new smart key to add

  1. Turn the car off and keep the recognized smart key and the new one(s) on you.
  2. At the rear of the car, put the key blade in the key cylinder on the lower rear fascia, driver side.
  3. Open the trunk, then turn the key five times within 5 seconds. The DIC shows READY FOR FOB #X (X is 2, 3 or 4).
  4. Put the new smart key in the transmitter pocket in the glove box, buttons facing right.
  5. A beep confirms the key is learned. The DIC shows READY FOR #X (3 or 4) or MAX # FOBS LEARNED.
  6. Press the OFF/ACCESSORY button to finish.
Watch out: The car must be off. Up to 4 smart keys can be programmed.
Add key - on the car(US / Canada cars)

Needs: No recognized smart key, every smart key the customer keeps, old and new, about 30 minutes with the car off

  1. Turn the car off and put the new smart key in the glove box transmitter pocket, buttons facing right.
  2. At the rear, put the key blade in the lower rear fascia key cylinder (driver side), open the trunk and turn the key five times within 5 seconds. The DIC shows OFF-ACC TO LEARN.
  3. Press the OFF/ACCESSORY button. The DIC shows WAIT 10 MINUTES and counts down one minute at a time.
  4. When OFF-ACC TO LEARN shows again, press OFF/ACCESSORY and wait out the next 10 minutes.
  5. Do step 4 once more (three presses and three 10-minute waits in total).
  6. A beep sounds and the DIC shows READY FOR FOB #1. Every old key is now erased.
  7. A beep confirms the key in the pocket is learned. The DIC shows READY FOR FOB #2.
  8. For each extra key, swap it into the pocket in place of the last one. At 4 keys the DIC shows MAX # FOBS LEARNED and leaves programming mode.
  9. Press the OFF/ACCESSORY button when you are done.
Watch out: This erases every stored smart key; reprogram all keys the customer keeps. Takes three 10-minute waits with the car off. Up to 4 smart keys can be programmed.
Add key - on the car(US / Canada cars)

Needs: one working transmitter, new transmitter (key blade cut)

  1. Have the vehicle off and every transmitter (working and new) with you.
  2. Insert the key in the lock cylinder on the lower rear fascia, driver side, and turn it five times within five seconds; the trunk opens.
  3. The DIC shows READY FOR FOB #2, 3 or 4.
  4. Place the new transmitter in the glove box transmitter pocket, buttons facing the passenger side; a beep confirms it is learned.
  5. The DIC shows the next number or MAX # FOBS LEARNED; repeat step 4 for each further transmitter.
  6. Press the OFF/ACCESSORY button to leave programming mode.
Watch out: Up to four transmitters.
All keys lost - on the car(US / Canada cars)

Needs: every transmitter to be kept, 30 minutes

  1. Have every transmitter the customer keeps with you; cut the key blade if no transmitter works. The vehicle must be off.
  2. Place a new transmitter in the glove box transmitter pocket, buttons facing the passenger side.
  3. Insert the key in the lock cylinder on the lower rear fascia, driver side, and turn it five times within five seconds; the DIC shows OFF-ACC TO LEARN.
  4. Press the OFF/ACCESSORY button; the DIC shows WAIT 10 MINUTES and counts down.
  5. Each time OFF-ACC TO LEARN shows again, press OFF/ACCESSORY; three 10-minute waits in all (about 30 minutes).
  6. After the third wait a beep sounds and the DIC shows READY FOR FOB #1, then READY FOR FOB #2 once the fob in the pocket is learned; every older fob is now erased.
  7. Swap in each further transmitter until it beeps (up to four), then press OFF/ACCESSORY to finish.
Watch out: Every previously learned transmitter is erased. Up to four transmitters.

Key with a blade (regular or flip)

2 tools list this key. 1 of them list all keys lost.

All keys lost is listed by Lonsdor K518. Launch X-431 IMMO lists add key only.

Without a tool

The remote is programmed on the car, without a tool. Up to 4 remotes.

When the key changed

Smart key (push to start)

  • 2008 - 2009This yearChip: ID46315 MHzFCC: M3N5WY7777A(US / Canada cars)Keyless access; the learn pocket is in the glove box.

Check coverage first: support depends on the tool's software version and the exact model. A tool that is not shown here may still cover this car.

Frequently asked questions

Which FCC IDs do Cadillac XLR 2008–2009 remotes carry?

The remotes listed for this car carry FCC ID M3N5WY7777A. Match it with the FCC ID printed on your original remote.

Which tools program a Cadillac XLR 2008–2009 key?

The tool makers' coverage lists name XTOOL X100 PAD3 / X100 MAX, OBDSTAR Key Master G3, Autel KM100 (IKEY universal smart key), Xhorse VVDI Key Tool Max, Xhorse VVDI Key Tool Plus and Lonsdor K518 for this car; 2 of them list all keys lost. Check your tool's latest coverage list before the job.

Can the Cadillac XLR 2008–2009 remote be programmed without a tool?

The remote is programmed on the car, without a tool. Up to 4 remotes.