Skip to content

Chevrolet Blazer 1999 Key Fob & Car Keys

Keys that fit the 1998–2000 Chevrolet Blazer: remote keys, 3 buttons, FCC ID K0BUT1BT, 315 MHz. 2 compatible keys, remotes & shells (genuine and aftermarket) available for the 1999 Chevrolet Blazer.

Last updated: 6 November 2026

Key specifications for the Chevrolet Blazer 1998–2000

Key types
remote keys and key shells
Frequency
315 MHz
Buttons
3-button
Battery
CR2032
Compatible FCC IDs

To pick the right part, match the part number or FCC ID printed on your original remote, or listed in the Chevrolet parts catalogue, with the specifications on each listing. Every remote listed for the Chevrolet Blazer 1998–2000 transmits on 315 MHz.

A new smart key or remote has to be programmed to the car with a key programmer, and when every key is lost the programming is still done through the diagnostic port. We ship the key worldwide from the UAE by DHL and FedEx; any automotive locksmith or the dealer can cut and program it.

Programming the Chevrolet Blazer 1999 key

Remote

One tool lists this key.

  • OBDSTAR Key Master G3
    • Remote

Key type not stated by the list

One tool lists this key.

  • Launch X-431 IMMO
    • Add key

Without a tool

The remote is programmed on the car, without a tool. No working key is needed.

Programming steps

Program the remote without a tool(US / Canada cars)

Needs: the ignition key, every remote the customer keeps

  1. Close all doors and put the key in the ignition.
  2. Press and hold the power UNLOCK switch on the driver door panel; keep holding until step 4.
  3. Quickly turn the ignition ON (without starting), OFF, ON, OFF.
  4. Release the UNLOCK switch. The locks must cycle by themselves after you let go; if they do not, remove the key, open the driver door and start again.
  5. Hold LOCK and UNLOCK on the remote until the locks cycle (up to 30 seconds).
  6. Repeat step 5 right away for every other remote, the existing ones included.
  7. Turn the ignition ON to leave programming mode.
Watch out: The locks must cycle after you release the UNLOCK switch, not before; otherwise the car is not in programming mode. Program the customer's existing remotes in the same session.

When the key changed

Smart key (push to start)

  • 2019 - 2021Chip: ID46433 MHzFCC: HYQ4EA(US / Canada cars)HYQ4EA fob; 2021-2023 HYQ4ES fobs: chip not settled, read the old key.
  • from 2024Chip: ID49433 MHzFCC: YG0G21TB2(US / Canada cars)Hitag Pro key, not compatible with the 2019-2021 ID46 key.

Key with a blade (regular or flip)

  • 1998 - 2005This yearChip: None (PassLock)(US / Canada cars)No chip in the key; PassLock sensor sits in the ignition lock.

Check coverage first: support depends on the tool's software version and the exact model. A tool that is not shown here may still cover this car.

Frequently asked questions

Which keys fit the Chevrolet Blazer 1998–2000?

2 listings fit the Chevrolet Blazer 1998–2000: remote keys and key shells, in 3-button versions. Match the part number or FCC ID printed on your original key with the specifications on each listing.

What frequency does the Chevrolet Blazer 1998–2000 remote use?

Every remote listed for the Chevrolet Blazer 1998–2000 transmits on 315 MHz.

Which FCC IDs do Chevrolet Blazer 1998–2000 remotes carry?

The remotes listed for this car carry FCC ID K0BUT1BT. Match it with the FCC ID printed on your original remote.

Which tools program a Chevrolet Blazer 1998–2000 key?

The tool makers' coverage lists name OBDSTAR Key Master G3 and Launch X-431 IMMO for this car; 0 of them list all keys lost. Check your tool's latest coverage list before the job.

Can the Chevrolet Blazer 1998–2000 remote be programmed without a tool?

The remote is programmed on the car, without a tool. No working key is needed.