Skip to content

Chevrolet Bolt 2019 Key Fob & Car Keys

Keys that fit the 2017–2020 Chevrolet Bolt: smart keys, 4 buttons, FCC ID HYQ4AA or HYQ4EA, ID46E (GM extended) chip, 315 MHz. 3 compatible keys, remotes & shells (genuine and aftermarket) available for the 2019 Chevrolet Bolt.

Last updated: 17 November 2026

Key specifications for the Chevrolet Bolt 2017–2020

Key types
smart keys, key shells and emergency blades
Frequency
315 MHz
Buttons
4-button
Transponder chip
ID46E (GM extended)
Blade profile
HU100
Battery
CR2032
Compatible FCC IDs

To pick the right part, match the part number or FCC ID printed on your original remote, or listed in the Chevrolet parts catalogue, with the specifications on each listing. Every remote listed for the Chevrolet Bolt 2017–2020 transmits on 315 MHz.

A new smart key or remote has to be programmed to the car with a key programmer, and when every key is lost the programming is still done through the diagnostic port. We ship the key worldwide from the UAE by DHL and FedEx; any automotive locksmith or the dealer can cut and program it.

Programming the Chevrolet Bolt 2019 key

Smart key (push to start)

3 tools list this key. 2 of them list all keys lost.

Programming steps

Add key - on the car(US / Canada cars)

Needs: With two recognized smart keys, two working (recognized) smart keys, every new smart key to add

  1. Set the two recognized smart keys in the cupholder.
  2. Take the cap off the key cylinder on the driver door handle, put the blade of the new smart key in the driver door lock and turn it to UNLOCK five times within 10 seconds. The DIC shows READY FOR REMOTE # 3, 4, 5, 6, 7, or 8.
  3. Put the new smart key in the transmitter pocket in the center console, buttons facing the floor (open the console and take out the small tray).
  4. Press POWER. Once the key is learned, the DIC asks for the next one.
  5. Take the key out and press UNLOCK or LOCK on it.
  6. For each extra smart key, repeat steps 3 to 5.
  7. When done, hold POWER for about 12 seconds to leave programming mode.
  8. Slide the blade back into the smart key.
Watch out: The car must be off, with every smart key (old and new) inside.
Add key - on the car(US / Canada cars)

Needs: Fewer than two recognized smart keys (US cars), every smart key the customer keeps, old and new, about 30 minutes with the car off

  1. Take the cap off the key cylinder on the driver door handle, put the blade in the driver door lock and turn it to UNLOCK five times within 10 seconds. The DIC shows REMOTE LEARN PENDING, PLEASE WAIT.
  2. Wait 10 minutes until the DIC shows PRESS ENGINE START BUTTON TO LEARN, then press POWER. The DIC goes back to REMOTE LEARN PENDING, PLEASE WAIT.
  3. Do the previous step two more times (three waits in total). After the third press every old key is erased and the DIC shows READY FOR REMOTE # 1.
  4. Put the smart key in the transmitter pocket in the center console, buttons facing the floor (open the console and take out the small tray).
  5. Press POWER. Once the key is learned, the DIC asks for the next one.
  6. Take the key out and press UNLOCK or LOCK on it.
  7. Repeat steps 4 to 6 for every other key, the customer's old keys included.
  8. When done, hold POWER for about 12 seconds to leave programming mode.
  9. Slide the blade back into the smart key.
Watch out: The third wait erases every stored smart key; relearn all keys the customer keeps. Not available on Canadian cars. Takes about 30 minutes (three 10-minute waits); the car stays off. Up to 8 smart keys can be programmed.
Add key - on the car(US / Canada cars)

Needs: two working smart keys, new smart key

  1. Have the vehicle off and every smart key (two working ones and the new ones) with you.
  2. Put the two working smart keys where the owner's manual says: the cupholder on 2017-2018 cars, the console backup location (buttons down) from 2019.
  3. Remove the lock cylinder cap on the driver door handle, insert the new key's blade and turn to unlock five times within 10 seconds; the DIC shows READY FOR REMOTE #3, 4...
  4. Place the new smart key in the console transmitter pocket / backup location, buttons down, and press POWER; the DIC shows it is ready for the next one.
  5. Take the key out of the pocket and press lock or unlock on it.
  6. Repeat steps 4-5 for each new key, then hold POWER about 12 seconds to leave programming mode; refit the lock cylinder cap.
Watch out: From 2017 the quick learn needs two learned keys. Up to eight smart keys (owner's manual).
All keys lost - on the car(US / Canada cars)

Needs: every smart key to be kept, 30 minutes

  1. Have every smart key the customer keeps with you; the blade of the new key must be cut if no key works.
  2. With the vehicle off, remove the driver door lock cylinder cap, insert the key blade and turn to unlock five times within 10 seconds; the DIC shows REMOTE LEARN PENDING, PLEASE WAIT.
  3. Wait about 10 minutes until the DIC shows PRESS ENGINE START BUTTON TO LEARN, then press POWER.
  4. Repeat the 10-minute wait and button press two more times (about 30 minutes in all); the DIC then shows READY FOR REMOTE #1.
  5. Place a smart key in the console transmitter pocket / backup location, buttons down, and press POWER; the DIC moves to the next number.
  6. Take it out, press lock or unlock, and repeat for every key the customer keeps.
  7. Hold POWER about 12 seconds to leave programming mode, refit the lock cylinder cap, then test every key.
Watch out: After the third cycle every previously known smart key is erased: relearn all of them in the same session. Not available in Canada (owner's manual).

Key type not stated by the list

One tool lists this key.

  • Launch X-431 IMMO
    • Add key

Without a tool

The remote is programmed on the car, without a tool. Up to 8 remotes.

When the key changed

Smart key (push to start)

  • 2017 - 2021This yearChip: ID46315 MHzFCC: HYQ4AA(US / Canada cars)Bolt EV; not compatible with the 2022-2023 433 MHz fob.
  • 2022 - 2023Chip: ID46433 MHzBlade: HU100FCC: HYQ4ES(US / Canada cars)Bolt EV and Bolt EUV; the 2017-2021 315 MHz fob does not fit.

Check coverage first: support depends on the tool's software version and the exact model. A tool that is not shown here may still cover this car.

Frequently asked questions

Which keys fit the Chevrolet Bolt 2017–2020?

3 listings fit the Chevrolet Bolt 2017–2020: smart keys, key shells and emergency blades, in 4-button versions. Match the part number or FCC ID printed on your original key with the specifications on each listing.

What frequency does the Chevrolet Bolt 2017–2020 remote use?

Every remote listed for the Chevrolet Bolt 2017–2020 transmits on 315 MHz.

Which transponder chip does the Chevrolet Bolt 2017–2020 key use?

The listings for this car carry: ID46E (GM extended). Check the chip in each listing's specifications.

Which FCC IDs do Chevrolet Bolt 2017–2020 remotes carry?

The remotes listed for this car carry FCC ID HYQ4AA and HYQ4EA. Match it with the FCC ID printed on your original remote.

Which blade profile does the Chevrolet Bolt 2017–2020 key use?

The blades listed for this car: HU100.

Which tools program a Chevrolet Bolt 2017–2020 key?

The tool makers' coverage lists name OBDSTAR Key Master G3, XTOOL X100 PAD3 / X100 MAX, Autel KM100 (IKEY universal smart key) and Launch X-431 IMMO for this car; 2 of them list all keys lost. Check your tool's latest coverage list before the job.

Can the Chevrolet Bolt 2017–2020 remote be programmed without a tool?

The remote is programmed on the car, without a tool. Up to 8 remotes.