Skip to content

Chevrolet Camaro 2019 Key Fob & Car Keys

Keys that fit the 2019 Chevrolet Camaro: smart keys, 3, 4 or 5 buttons, FCC ID HYQ4EA, HYQ4AS or HYQ4ES, ID46E (GM extended) or ID46 (HITAG 2) chip, 433 MHz. 17 compatible keys, remotes & shells (genuine and aftermarket) available for the 2019 Chevrolet Camaro.

Last updated: 17 November 2026

Key specifications for the Chevrolet Camaro 2019

Key types
smart keys, key shells and emergency blades
Frequency
433 MHz
Buttons
3-, 4-, 5- and 6-button
Transponder chip
ID46E (GM extended) · ID46 (HITAG 2)
Blade profile
HU100
Part numbers
13529655
Battery
CR2032
Compatible FCC IDs

To pick the right part, match the part number or FCC ID printed on your original remote, or listed in the Chevrolet parts catalogue, with the specifications on each listing. Every remote listed for the Chevrolet Camaro 2019 transmits on 433 MHz.

A new smart key or remote has to be programmed to the car with a key programmer, and when every key is lost the programming is still done through the diagnostic port. We ship the key worldwide from the UAE by DHL and FedEx; any automotive locksmith or the dealer can cut and program it.

Programming the Chevrolet Camaro 2019 key

Smart key (push to start)

7 tools list this key. 3 of them list all keys lost.

All keys lost is listed by OBDSTAR Key Master G3, Lonsdor K518 and XTOOL X100 PAD3 / X100 MAX. Advanced Diagnostics Smart Pro lists add key only.

Programming steps

Add key - on the car(US / Canada cars)

Needs: With two recognized transmitters, two recognized transmitters, every new transmitter to be programmed

  1. Switch the car off and keep every transmitter, recognized and new, with you.
  2. Put the two recognized transmitters in the rear cup holder of the center console.
  3. Remove the cap of the lock cylinder on the driver door handle, insert the new transmitter's key blade and turn it to UNLOCK five times within 10 seconds. The DIC shows READY FOR REMOTE #2 to #8.
  4. Take the recognized transmitters out of the cup holder and put the new transmitter there.
  5. Press ENGINE START/STOP. Once the transmitter is learned, the DIC shows it is ready for the next one.
  6. Take the transmitter out of the cup holder and press LOCK or UNLOCK.
  7. For each further transmitter, repeat steps 4 to 6.
  8. When done, hold ENGINE START/STOP for 12 seconds to leave programming mode, then put the key blade back in the transmitter.
Watch out: The five UNLOCK turns must be done within 10 seconds.
Add key - on the car(US / Canada cars)

Needs: No recognized transmitter available, every transmitter the customer keeps, about 30 minutes

  1. Switch the car off and keep every transmitter to be programmed with you.
  2. Remove the cap of the lock cylinder on the driver door handle, insert a transmitter's key blade and turn it to UNLOCK five times within 10 seconds. The DIC shows REMOTE LEARN PENDING, PLEASE WAIT.
  3. After 10 minutes the cluster reads PRESS ENGINE START BUTTON TO LEARN: push ENGINE START/STOP, and REMOTE LEARN PENDING, PLEASE WAIT returns.
  4. Do step 3 two more times. The DIC then shows READY FOR REMOTE # 1.
  5. Put the transmitter in the rear cup holder of the center console and press ENGINE START/STOP. Once learned, the DIC shows it is ready for the next one.
  6. Take the transmitter out of the cup holder and press LOCK or UNLOCK.
  7. Repeat steps 5 and 6 for each other transmitter.
  8. When all are done, hold ENGINE START/STOP for 12 seconds to leave programming mode.
Watch out: After the third cycle every previously known transmitter stops working; program again every one the customer keeps. Not available on Canadian cars. Takes about 30 minutes; up to eight transmitters can be programmed.
Add key - on the car(US / Canada cars)

Needs: two working smart keys, new smart key

  1. Have the vehicle off and every smart key (two working ones and the new ones) with you.
  2. Put the two working smart keys in the cupholder (or the place the owner's manual names).
  3. Remove the key blade, insert it in the driver door lock cylinder and turn to unlock five times within 10 seconds; the DIC shows READY FOR REMOTE #2, 3...
  4. Place the new smart key in the transmitter pocket and press ENGINE START/STOP; the DIC shows it is ready for the next one.
  5. Take the key out of the pocket and press lock or unlock on it.
  6. Repeat steps 4-5 for each new key, then hold ENGINE START/STOP about 12 seconds to leave programming mode.
Watch out: From 2017 the quick learn needs two learned keys.
All keys lost - on the car(US / Canada cars)

Needs: every smart key to be kept, 30 minutes

  1. Have every smart key the customer keeps with you; the blade of the new key must be cut if no key works.
  2. With the vehicle off, insert the key blade in the driver door lock cylinder and turn to unlock five times within 10 seconds; the DIC shows REMOTE LEARN PENDING, PLEASE WAIT.
  3. Wait about 10 minutes until the DIC shows PRESS ENGINE START BUTTON TO LEARN, then press ENGINE START/STOP.
  4. Repeat the 10-minute wait and button press two more times (about 30 minutes in all); the DIC then shows READY FOR REMOTE #1.
  5. Place a smart key in the transmitter pocket and press ENGINE START/STOP; the DIC moves to the next number.
  6. Take it out, press lock or unlock, and repeat for every key the customer keeps.
  7. Hold ENGINE START/STOP about 12 seconds to leave programming mode, then test every key.
Watch out: After the third cycle every previously known smart key is erased: relearn all of them in the same session. Not available in Canada (owner's manual).

Key with a blade (regular or flip)

2 tools list this key. 2 of them list all keys lost.

    • Add key
    • All keys lost
    PIN read function
  • XTOOL X100 PAD3 / X100 MAX
    • Add key
    • All keys lost
    PIN read function

Key type not stated by the list

One tool lists this key.

  • Launch X-431 IMMO
    • Add key

Without a tool

The remote is programmed on the car, without a tool. Up to 8 remotes.

When the key changed

Smart key (push to start)

  • 2016 - 2021This yearChip: ID46433 MHzBlade: HU100FCC: HYQ4EA(US / Canada cars)2022-2024 fobs (HYQ4AS / HYQ4ES): chip not settled, read the old key.

Key with a blade (regular or flip)

  • 1997 - 2002Chip: None (VATS)(US / Canada cars)Resistor pellet in the key blade (VATS / PASS-Key); no transponder.
  • 2010 - 2015Chip: ID46 Hitag2 Extended315 MHzBlade: HU100FCC: OHT01060512(US / Canada cars)Flip key; some engines need the PIN (Hyde).

Check coverage first: support depends on the tool's software version and the exact model. A tool that is not shown here may still cover this car.

Frequently asked questions

Which keys fit the Chevrolet Camaro 2019?

17 listings fit the Chevrolet Camaro 2019: smart keys, key shells and emergency blades, in 3-, 4-, 5- and 6-button versions. Match the part number or FCC ID printed on your original key with the specifications on each listing.

What frequency does the Chevrolet Camaro 2019 remote use?

Every remote listed for the Chevrolet Camaro 2019 transmits on 433 MHz.

Which transponder chip does the Chevrolet Camaro 2019 key use?

The listings for this car carry: ID46E (GM extended) · ID46 (HITAG 2). Check the chip in each listing's specifications.

Which FCC IDs do Chevrolet Camaro 2019 remotes carry?

The remotes listed for this car carry FCC ID HYQ4AS, HYQ4EA and HYQ4ES. Match it with the FCC ID printed on your original remote.

Which blade profile does the Chevrolet Camaro 2019 key use?

The blades listed for this car: HU100.

Which tools program a Chevrolet Camaro 2019 key?

The tool makers' coverage lists name OBDSTAR Key Master G3, Lonsdor K518, XTOOL X100 PAD3 / X100 MAX, Advanced Diagnostics Smart Pro, Autel KM100 (IKEY universal smart key) and Xhorse VVDI Key Tool Max for this car; 3 of them list all keys lost. Check your tool's latest coverage list before the job.

Can the Chevrolet Camaro 2019 remote be programmed without a tool?

The remote is programmed on the car, without a tool. Up to 8 remotes.