Skip to content

Chevrolet Corvette 2009 Key Fob & Car Keys

1 compatible key, remote & shell (genuine and aftermarket) available for the 2009 Chevrolet Corvette.

Last updated: 2 October 2026

Key specifications for the Chevrolet Corvette 2008–2013

Compatible FCC IDs

To pick the right part, match the part number or FCC ID printed on your original remote, or listed in the Chevrolet parts catalogue, with the specifications on each listing.

Shells and blades reuse the original electronics, and a blade needs cutting by a locksmith. We ship worldwide from the UAE by DHL and FedEx.

Programming the Chevrolet Corvette 2009 key

Smart key (push to start)

2 tools list this key.

Programming steps

Add key - on the car(US / Canada cars)

Needs: With a recognized transmitter, one recognized transmitter (two on Canadian cars), the new transmitter, the car's mechanical key

  1. Switch the car off and keep the recognized and new transmitters with you.
  2. Insert the mechanical key in the lock cylinder on the lower rear fascia, driver side and open the trunk.
  3. Turn the key five times within five seconds. The DIC shows READY FOR FOB #2, 3, or 4.
  4. Put the new transmitter in the glove box transmitter pocket with the buttons facing right.
  5. A beep confirms it. The DIC shows READY FOR FOB X (3 or 4) or MAXIMUM NUMBER OF FOBS LEARNED.
  6. For another transmitter, repeat step 4. When done, press ACC on the ignition switch.
  7. Press UNLOCK on each new transmitter to finish.
Watch out: Canadian cars need two recognized transmitters for this method. Not available when 4 fobs are already stored (MAX FOBS LEARNED, the procedure exits). The five key turns must be done within five seconds.
Add key - on the car(US / Canada cars)

Needs: No recognized transmitter (US cars only, erases all), every transmitter the customer keeps, the car's mechanical key, about 30 minutes

  1. Switch the car off and put the new transmitter in the glove box transmitter pocket with the buttons facing right.
  2. Insert the mechanical key in the lock cylinder on the lower rear fascia, driver side and open the trunk.
  3. Turn the key five times within five seconds. The DIC shows OFF-ACC TO LEARN.
  4. Press ACC on the ignition switch. The DIC shows WAIT 10 MINUTES and counts down to zero.
  5. When OFF-ACC TO LEARN shows again, press ACC. Repeat this 10 minute wait and ACC press two more times.
  6. A beep sounds and the DIC shows READY FOR FOB #1; all old transmitters are erased now. A beep confirms the transmitter in the pocket and the DIC shows READY FOR FOB #2.
  7. For each other transmitter, take the previous one out of the pocket and put the next one in.
  8. After 4 transmitters the DIC shows MAXIMUM NUMBER OF FOBS LEARNED and exits. Press ACC on the ignition switch to complete, or when you stop earlier.
  9. Press UNLOCK on each new transmitter to finish.
Watch out: Every transmitter programmed before is erased; program all the customer keeps. Canadian cars without two recognized transmitters must go to a dealer or locksmith with a tool. Three 10 minute cycles; up to 4 transmitters.
Add key - on the car(US / Canada cars)

Needs: one working smart key, new smart key

  1. Have the vehicle off and the recognized and new transmitters with you.
  2. Insert the key in the lock cylinder above the license plate, open the hatch / trunk and turn the key five times within five seconds; the DIC shows READY FOR FOB #2, 3 or 4.
  3. Place the new transmitter in the glove box transmitter pocket, buttons facing the passenger side.
  4. A beep confirms it is learned; the DIC shows the next number or MAXIMUM NUMBER OF FOBS LEARNED.
  5. Repeat steps 3-4 for each further transmitter, then press ACC on the ignition switch to finish.
  6. Press unlock on each newly programmed transmitter.
Watch out: Up to four transmitters. Canadian cars need two recognized transmitters (owner's manual).
All keys lost - on the car(US / Canada cars)

Needs: every transmitter to be kept, 30 minutes

  1. Have every transmitter the customer keeps with you; the vehicle must be off.
  2. Place a new transmitter in the glove box transmitter pocket, buttons facing the passenger side.
  3. Insert the key in the lock cylinder above the license plate, open the hatch / trunk and turn the key five times within five seconds; the DIC shows OFF-ACCESSORY TO LEARN.
  4. Press ACC on the ignition switch; the DIC shows WAIT 10 MINUTES and counts down.
  5. Each time OFF-ACCESSORY TO LEARN shows again, press ACC; three 10-minute waits in all (about 30 minutes).
  6. After the third wait a beep sounds and the DIC shows READY FOR FOB #2: the fob in the pocket is learned and every older fob is erased.
  7. Swap in each further transmitter until it beeps (up to four), then press ACC to finish.
  8. Press unlock on each newly programmed transmitter.
Watch out: Every previously learned transmitter is erased. Up to four transmitters. Not available in Canada (owner's manual).

Key with a blade (regular or flip)

2 tools list this key. 1 of them list all keys lost.

All keys lost is listed by Lonsdor K518. Launch X-431 IMMO lists add key only.

Without a tool

The remote is programmed on the car, without a tool. Up to 4 remotes.

When the key changed

Smart key (push to start)

  • 2005 - 2013This yearChip: ID46315 MHzFCC: M3N65981403, M3N5WY7777A(US / Canada cars)M3N65981403 to 2007, M3N5WY7777A from 2008: read the FCC ID.
  • 2014 - 2019Chip: ID46FCC: NBGGD9C04(US / Canada cars)Several FCC IDs on 315 and 433 MHz: read the FCC ID.
  • 2020 - 2023Chip: ID49433 MHzFCC: YG0G20TB1(US / Canada cars)Hitag Pro key; YG0G20TB1 is the 433 MHz fob.

Key with a blade (regular or flip)

  • 2001 - 2004Chip: None (VATS)(US / Canada cars)Resistor pellet in the key blade (VATS / PASS-Key); no transponder.

Check coverage first: support depends on the tool's software version and the exact model. A tool that is not shown here may still cover this car.

Frequently asked questions

Which FCC IDs do Chevrolet Corvette 2008–2013 remotes carry?

The remotes listed for this car carry FCC ID M3N5WY7777A. Match it with the FCC ID printed on your original remote.

Which tools program a Chevrolet Corvette 2008–2013 key?

The tool makers' coverage lists name OBDSTAR Key Master G3, Autel KM100 (IKEY universal smart key), Lonsdor K518 and Launch X-431 IMMO for this car; 1 of them lists all keys lost. Check your tool's latest coverage list before the job.

Can the Chevrolet Corvette 2008–2013 remote be programmed without a tool?

The remote is programmed on the car, without a tool. Up to 4 remotes.