Skip to content

Chevrolet Equinox 2020 Key Fob & Car Keys

Keys that fit the 2020 Chevrolet Equinox: smart keys, 2, 3 or 4 buttons, FCC ID HYQ4EA or HYQ4AA, ID46E (GM extended) or ID46 (HITAG 2) chip, 315 MHz or 433 MHz. 13 compatible keys, remotes & shells (genuine and aftermarket) available for the 2020 Chevrolet Equinox.

Last updated: 17 November 2026

Key specifications for the Chevrolet Equinox 2020

Key types
smart keys, key shells and emergency blades
Frequency
315 MHz and 433 MHz
Buttons
2-, 3-, 4- and 5-button
Transponder chip
ID46E (GM extended) · ID46 (HITAG 2)
Blade profile
HU100
Part numbers
13585722 · 13519177
Battery
CR2032
Compatible FCC IDs

To pick the right part, match the part number or FCC ID printed on your original remote, or listed in the Chevrolet parts catalogue, with the specifications on each listing. The frequency depends on the market the car was sold in, so check 315 MHz and 433 MHz against your original before ordering.

A new smart key or remote has to be programmed to the car with a key programmer, and when every key is lost the programming is still done through the diagnostic port. We ship the key worldwide from the UAE by DHL and FedEx; any automotive locksmith or the dealer can cut and program it.

Programming the Chevrolet Equinox 2020 key

Smart key (push to start)

4 tools list this key. 3 of them list all keys lost.

  • OBDSTAR Key Master G3
    • Add key
    • All keys lost
    • Remote
    reads the PIN by OBD · PIN from a third party
    • Add key
    • All keys lost
    PIN read function
  • XTOOL X100 PAD3 / X100 MAX
    • Add key
    • All keys lost
    PIN read function
    • Universal key

Programming steps

Add key - on the car(US / Canada cars)

Needs: Push-button start, with two working smart keys, two working smart keys, every new smart key

  1. Engine off; keep every smart key, working and new, with you.
  2. Take the emergency blade out of one working smart key and put both working smart keys in the cupholder.
  3. Insert the blade in the driver's door lock and turn it to unlock 5 times within 10 seconds (some cars need the handle cap removed first). The DIC shows READY FOR REMOTE # 2, 3, 4...
  4. Put the new smart key in the transmitter pocket (Cadillac: center console storage between the front seats; Chevrolet and Buick: front cupholder).
  5. Press ENGINE START/STOP. When the key is recognized, the DIC shows it is ready for the next key.
  6. Take the key out of the pocket and press LOCK or UNLOCK on it.
  7. Repeat steps 4 to 6 for each extra smart key.
  8. When done, hold ENGINE START/STOP for about 12 seconds to leave programming mode.
Watch out: Up to 8 smart keys can be stored. North American cars only; not for Canadian cars.
Add key - on the car(US / Canada cars)

Needs: Push-button start, with one working smart key or none, every smart key to keep, working and new, with no working smart key: the new key's emergency blade cut to the car first

  1. Engine off; keep every smart key, working and new, with you.
  2. Take the blade out of a working or new smart key, insert it in the driver's door lock and turn it to unlock 5 times within 10 seconds (remove the handle cap first if needed). The DIC shows READY FOR REMOTE # 2, 3, 4...
  3. Wait 10 minutes until the DIC shows PRESS ENGINE START BUTTON TO LEARN, then press ENGINE START/STOP. The DIC shows REMOTE LEARN PENDING, PLEASE WAIT again.
  4. Repeat step 3 two more times. After the third cycle the DIC shows READY FOR REMOTE # 1.
  5. Put the new smart key in the transmitter pocket (Cadillac: center console storage between the front seats; Chevrolet and Buick: front cupholder).
  6. Press ENGINE START/STOP. When the key is recognized, the DIC shows it is ready for the next key.
  7. Take the key out of the pocket and press LOCK or UNLOCK on it.
  8. Repeat steps 5 to 7 for each extra smart key, the old ones to keep included.
  9. When done, hold ENGINE START/STOP for about 12 seconds to leave programming mode.
Watch out: The procedure takes about 30 minutes. After the third wait cycle every previously known smart key stops working; relearn each one to keep. Up to 8 smart keys can be stored. Not available on Canadian cars.
Add key - on the car(US / Canada cars)

Needs: two working smart keys, new smart key

  1. Have the vehicle off and every smart key (two working ones and the new ones) with you.
  2. Put the two working smart keys in the cupholder (or the place the owner's manual names).
  3. Remove the key blade, insert it in the driver door lock cylinder and turn to unlock five times within 10 seconds; the DIC shows READY FOR REMOTE #2, 3...
  4. Place the new smart key in the transmitter pocket and press ENGINE START/STOP; the DIC shows it is ready for the next one.
  5. Take the key out of the pocket and press lock or unlock on it.
  6. Repeat steps 4-5 for each new key, then hold ENGINE START/STOP about 12 seconds to leave programming mode.
Watch out: From 2017 the quick learn needs two learned keys.
All keys lost - on the car(US / Canada cars)

Needs: every smart key to be kept, 30 minutes

  1. Have every smart key the customer keeps with you; the blade of the new key must be cut if no key works.
  2. With the vehicle off, insert the key blade in the driver door lock cylinder and turn to unlock five times within 10 seconds; the DIC shows REMOTE LEARN PENDING, PLEASE WAIT.
  3. Wait about 10 minutes until the DIC shows PRESS ENGINE START BUTTON TO LEARN, then press ENGINE START/STOP.
  4. Repeat the 10-minute wait and button press two more times (about 30 minutes in all); the DIC then shows READY FOR REMOTE #1.
  5. Place a smart key in the transmitter pocket and press ENGINE START/STOP; the DIC moves to the next number.
  6. Take it out, press lock or unlock, and repeat for every key the customer keeps.
  7. Hold ENGINE START/STOP about 12 seconds to leave programming mode, then test every key.
Watch out: After the third cycle every previously known smart key is erased: relearn all of them in the same session. Not available in Canada (owner's manual).

Key with a blade (regular or flip)

One tool lists this key.

  • OBDSTAR Key Master G3
    • Add key
    • All keys lost
    • Remote
    PIN read function · PIN from a third party

Key type not stated by the list

One tool lists this key.

  • Launch X-431 IMMO
    • Add key
    • All keys lost
    PIN read function

Without a tool

The remote is programmed on the car, without a tool. No working key is needed. Up to 8 remotes.

When the key changed

Smart key (push to start)

  • 2018 - 2021This yearChip: ID46Blade: HU100FCC: HYQ4AAHYQ4AA is the 315 MHz fob; 433 MHz fobs exist: read the FCC ID.

Key with a blade (regular or flip)

  • 2005 - 2006Chip: None (PassLock)(US / Canada cars)No chip in the key; PassLock sensor sits in the ignition lock.
  • 2007 - 2009Chip: ID46Blade: B111(US / Canada cars)Circle Plus key.
  • 2010 - 2017Chip: ID46 Hitag2 Extended315 MHzBlade: HU100FCC: OHT01060512(US / Canada cars)Flip remote key; remote and transponder learn together.

Check coverage first: support depends on the tool's software version and the exact model. A tool that is not shown here may still cover this car.

Frequently asked questions

Which keys fit the Chevrolet Equinox 2020?

13 listings fit the Chevrolet Equinox 2020: smart keys, key shells and emergency blades, in 2-, 3-, 4- and 5-button versions. Match the part number or FCC ID printed on your original key with the specifications on each listing.

What frequency does the Chevrolet Equinox 2020 remote use?

Listings for the Chevrolet Equinox 2020 come in 315 MHz and 433 MHz: the frequency depends on the market the car was sold in, so check it against your original remote before ordering.

Which transponder chip does the Chevrolet Equinox 2020 key use?

The listings for this car carry: ID46E (GM extended) · ID46 (HITAG 2). Check the chip in each listing's specifications.

Which FCC IDs do Chevrolet Equinox 2020 remotes carry?

The remotes listed for this car carry FCC ID HYQ4AA and HYQ4EA. Match it with the FCC ID printed on your original remote.

Which blade profile does the Chevrolet Equinox 2020 key use?

The blades listed for this car: HU100.

Which tools program a Chevrolet Equinox 2020 key?

The tool makers' coverage lists name OBDSTAR Key Master G3, Lonsdor K518, XTOOL X100 PAD3 / X100 MAX, Autel KM100 (IKEY universal smart key) and Launch X-431 IMMO for this car; 4 of them list all keys lost. Check your tool's latest coverage list before the job.

Can the Chevrolet Equinox 2020 remote be programmed without a tool?

The remote is programmed on the car, without a tool. No working key is needed. Up to 8 remotes.