Chevrolet Malibu 2015 Key Fob & Car Keys
Keys that fit the 2015 Chevrolet Malibu: smart keys, flip keys and remote keys, 3, 4 or 5 buttons, FCC ID 0HT01060512 or 0HT05918179, ID46E (GM extended) or ID46 (HITAG 2) chip, 315 MHz or 433 MHz. 31 compatible keys, remotes & shells (genuine and aftermarket) available for the 2015 Chevrolet Malibu.
Last updated: 17 November 2026
Key specifications for the Chevrolet Malibu 2015
- Key types
- smart keys, flip keys, remote keys, transponder keys, key shells and emergency blades
- Frequency
- 315 MHz and 433 MHz
- Buttons
- 3-, 4- and 5-button
- Transponder chip
- ID46E (GM extended) · ID46 (HITAG 2)
- Blade profile
- HU100
- Part numbers
- 13585209 · 13504200 · For GM 13504199
- Battery
- CR2032
- Compatible FCC IDs
To pick the right part, match the part number or FCC ID printed on your original remote, or listed in the Chevrolet parts catalogue, with the specifications on each listing. The frequency depends on the market the car was sold in, so check 315 MHz and 433 MHz against your original before ordering.
A new smart key or remote has to be programmed to the car with a key programmer, and when every key is lost the programming is still done through the diagnostic port. We ship the key worldwide from the UAE by DHL and FedEx; any automotive locksmith or the dealer can cut and program it.
- $16.85In Stock
- $35.11In Stock
- $19.66In Stock
- Chevrolet 2014–2020 Peps Flip Remote Smart Key 5-button 315MHz - OHT05918179, 5921873, HU100
SKU: B05740
$11.24In Stock - Chevrolet Impala Malibu Cruze SS 2012-2020 PEPS Flip Key 5-Button 315 MHz - OHT05918179 5921873
SKU: B06004
$23.87In Stock - Chevrolet Malibu Impala Cruze 2013-2015 Flip Remote Key PCB 4-Button 433 MHz ID46 - 5912544
SKU: B02046
$5.62In Stock - GM Cruze Impala Malibu 2011-2018 Flip Key TPU Cover 4-button Black Chrome - Fits Key 13585209
SKU: B07144
$1.96In Stock - GM Cruze Impala Malibu 2011-2018 Flip Key TPU Cover 4-button Black Gold - Fits Key 13585209
SKU: B07146
$1.96In Stock - GM Cruze Impala Malibu 2011-2018 Flip Key TPU Cover 4-button Black Metal - Fits Key 13585209
SKU: B07147
$1.96In Stock - GM Cruze Impala Malibu 2011-2018 Flip Key TPU Cover 4-button White Gold - Fits Key 13585209
SKU: B07145
$1.96In Stock - $1.96In Stock
- $1.96In Stock
- $1.96In Stock
- $1.96In Stock
Programming the Chevrolet Malibu 2015 key
Smart key (push to start)
7 tools list this key. 3 of them list all keys lost.
- OBDSTAR Key Master G3
- Add key
- All keys lost
- Remote
reads the PIN by OBD - Add key
- All keys lost
PIN read function- XTOOL X100 PAD3 / X100 MAX
- Add key
- All keys lost
PIN read function - Advanced Diagnostics Smart Pro
- Add key
- Universal key
- Universal key
- Universal key
All keys lost is listed by OBDSTAR Key Master G3, Lonsdor K518 and XTOOL X100 PAD3 / X100 MAX. Advanced Diagnostics Smart Pro lists add key only.
Programming steps
Add key - on the car(US / Canada cars)
Needs: one working smart key, new smart key
- Have the vehicle off and every transmitter (working and new) with you.
- Put the working (recognized) transmitter in the transmitter pocket or cupholder named in the owner's manual.
- Remove the key blade from a transmitter, insert it in the driver door lock cylinder and turn to unlock five times within 10 seconds; the DIC shows READY FOR REMOTE #2, 3...
- Place the new transmitter in the transmitter pocket and press ENGINE START/STOP; the DIC shows it is ready for the next one.
- Take the transmitter out of the pocket and press lock or unlock on it.
- Repeat steps 4-5 for each new transmitter, then hold ENGINE START/STOP about 12 seconds to leave programming mode.
Add key - on the car(US / Canada cars)
Needs: Keyless Access cars, with one recognized transmitter, one recognized transmitter, the new transmitter
- Switch the car off and keep every transmitter, recognized and new, with you.
- Put the recognized transmitter in the transmitter pocket inside the center console storage area.
- Insert the new transmitter's key blade in the driver door lock cylinder and turn it to UNLOCK five times within 10 seconds. The DIC shows READY FOR REMOTE #2, 3, 4 or 5.
- Put the new transmitter in the transmitter pocket inside the center console storage area (2016: buttons facing the rear).
- Press ENGINE START/STOP. Once learned, the DIC shows it is ready for the next transmitter.
- Take the transmitter out and press UNLOCK.
- Repeat steps 4 to 6 for each other transmitter.
- When done, hold ENGINE START/STOP for 12 seconds to leave programming mode.
Add key - on the car(US / Canada cars)
Needs: Keyless Access cars, no recognized transmitter, every transmitter the customer keeps, about 30 minutes
- Switch the car off and keep every transmitter to be programmed with you.
- Insert a transmitter's key blade in the driver door lock cylinder and turn it to UNLOCK five times within 10 seconds. The DIC shows REMOTE LEARN PENDING, PLEASE WAIT.
- Wait 10 minutes until the DIC shows PRESS ENGINE START BUTTON TO LEARN, then press ENGINE START/STOP. The DIC goes back to REMOTE LEARN PENDING, PLEASE WAIT.
- Do step 3 two more times. The DIC then shows READY FOR REMOTE # 1.
- Put the transmitter in the transmitter pocket inside the center console storage area and press ENGINE START/STOP. Once learned, the DIC shows it is ready for the next one.
- Take the transmitter out and press UNLOCK.
- Repeat steps 5 and 6 for each other transmitter.
- When all are done, hold ENGINE START/STOP for 12 seconds to leave programming mode, then put the key blade back in the transmitter.
All keys lost - on the car(US / Canada cars)
Needs: every smart key to be kept, 30 minutes
- Have every smart key the customer keeps with you; the blade of the new key must be cut if no key works.
- With the vehicle off, insert the key blade in the driver door lock cylinder and turn to unlock five times within 10 seconds; the DIC shows REMOTE LEARN PENDING, PLEASE WAIT.
- Wait about 10 minutes until the DIC shows PRESS ENGINE START BUTTON TO LEARN, then press ENGINE START/STOP.
- Repeat the 10-minute wait and button press two more times (about 30 minutes in all); the DIC then shows READY FOR REMOTE #1.
- Place a smart key in the transmitter pocket and press ENGINE START/STOP; the DIC moves to the next number.
- Take it out, press lock or unlock, and repeat for every key the customer keeps.
- Hold ENGINE START/STOP about 12 seconds to leave programming mode, then test every key.
Key with a blade (regular or flip)
2 tools list this key. 2 of them list all keys lost.
- OBDSTAR Key Master G3
- Add key
- All keys lost
- Remote
reads the PIN by OBD - Add key
- All keys lost
PIN read function
Programming steps
Add key - on the car(US / Canada cars)
Needs: one working key, new key cut to the vehicle
- Cut the new key to the vehicle; have one key that already starts it.
- Put the working key in the ignition and turn it to ON/RUN (or start the engine), then turn it to LOCK/OFF and remove it.
- Within five seconds insert the new key and turn it to ON/RUN.
- The security light goes off when the key is learned (this can be too fast to notice).
- Start the engine with the new key; for each further key repeat from step 2.
Add key - on the car(US / Canada cars)
Needs: Key cars, with one programmed key, one programmed key, a new key cut to the car
- Insert the programmed key and turn it to ON/RUN.
- Turn it to LOCK/OFF and take it out.
- Within five seconds, insert the new key and turn it to ON/RUN. The security light goes off when the key is programmed.
- Repeat steps 1 to 3 for each other new key.
Add key - on the car(US / Canada cars)
Needs: Key cars, no programmed key (first key), every new key cut to the car, about 30 minutes for the first key
- With the car off, insert the new key in the ignition.
- Turn it to ON/RUN. The security light comes on.
- Wait 10 minutes until the security light goes off, then turn to LOCK/OFF.
- Repeat steps 2 and 3 two more times.
- After the third cycle, turn to ON/RUN. The key is now learned.
- Add any other keys with the one programmed key method.
All keys lost - on the car(US / Canada cars)
Needs: new key cut to the vehicle, 30 minutes
- Cut the new key. Have every key the customer keeps; the old keys stop working at the end.
- Insert the new key and turn to ON/RUN without cranking; the security light comes on.
- Wait about 10 minutes until the security light goes off, then turn to LOCK/OFF.
- Repeat ON/RUN, wait 10 minutes, LOCK/OFF two more times (about 30 minutes in all).
- After the third cycle turn to ON/RUN: this key is learned and every previously known key is erased.
- Learn the remaining keys with the add-key procedure.
Key type not stated by the list
One tool lists this key.
- Launch X-431 IMMO
- Add key
Without a tool
The remote is programmed on the car, without a tool. It takes one working key. Up to 8 remotes.
When the key changed
Smart key (push to start)
- 2013 - 2015This yearChip: ID46Blade: HU100Proximity flip key, push-to-start trims only.
- 2016 - 2025Chip: ID46433 MHzBlade: HU100FCC: HYQ4EA, HYQ4ES(US / Canada cars)HYQ4EA to 2021, HYQ4ES from 2021; 2021 is a split year.
Key with a blade (regular or flip)
- 1997 - 2003Chip: None (PassLock)(US / Canada cars)No chip in the key; PassLock sensor sits in the ignition lock.
- 2004 - 2012Chip: ID46Blade: B111(US / Canada cars)Circle Plus key. 2004-2005 Malibu Classic still uses PassLock.
- 2013 - 2016This yearChip: ID46 Hitag2 ExtendedBlade: HU100(US / Canada cars)Flip key with HU100 blade; B111 keys do not fit.
Check coverage first: support depends on the tool's software version and the exact model. A tool that is not shown here may still cover this car.
Frequently asked questions
Which keys fit the Chevrolet Malibu 2015?
31 listings fit the Chevrolet Malibu 2015: smart keys, flip keys, remote keys, transponder keys, key shells and emergency blades, in 3-, 4- and 5-button versions. Match the part number or FCC ID printed on your original key with the specifications on each listing.
What frequency does the Chevrolet Malibu 2015 remote use?
Listings for the Chevrolet Malibu 2015 come in 315 MHz and 433 MHz: the frequency depends on the market the car was sold in, so check it against your original remote before ordering.
Which transponder chip does the Chevrolet Malibu 2015 key use?
The listings for this car carry: ID46E (GM extended) · ID46 (HITAG 2). Check the chip in each listing's specifications.
Which FCC IDs do Chevrolet Malibu 2015 remotes carry?
The remotes listed for this car carry FCC ID 0HT01060512 and 0HT05918179. Match it with the FCC ID printed on your original remote.
Which blade profile does the Chevrolet Malibu 2015 key use?
The blades listed for this car: HU100.
Which tools program a Chevrolet Malibu 2015 key?
The tool makers' coverage lists name OBDSTAR Key Master G3, Lonsdor K518, XTOOL X100 PAD3 / X100 MAX, Advanced Diagnostics Smart Pro, Autel KM100 (IKEY universal smart key) and Xhorse VVDI Key Tool Max for this car; 3 of them list all keys lost. Check your tool's latest coverage list before the job.
Can the Chevrolet Malibu 2015 remote be programmed without a tool?
The remote is programmed on the car, without a tool. It takes one working key. Up to 8 remotes.






























