Chevrolet Silverado 2019 Key Fob & Car Keys
Keys that fit the 2019 Chevrolet Silverado: smart keys, remote keys and transponder keys, 3, 4 or 5 buttons, FCC ID M3N32337100, M3N32337200 or HYQ1EA, ID46 (HITAG 2) chip, 315 MHz or 433 MHz. 17 compatible keys, remotes & shells (genuine and aftermarket) available for the 2019 Chevrolet Silverado.
Last updated: 17 November 2026
Key specifications for the Chevrolet Silverado 2019
- Key types
- smart keys, remote keys, transponder keys, key shells, emergency blades and key blanks
- Frequency
- 315 MHz and 433 MHz
- Buttons
- 3-, 4- and 5-button
- Transponder chip
- ID46 (HITAG 2)
- Blade profile
- HU100
- Part numbers
- 22881480 · 13577771
- Battery
- CR2032
- Compatible FCC IDs
To pick the right part, match the part number or FCC ID printed on your original remote, or listed in the Chevrolet parts catalogue, with the specifications on each listing. The frequency depends on the market the car was sold in, so check 315 MHz and 433 MHz against your original before ordering.
A new smart key or remote has to be programmed to the car with a key programmer, and when every key is lost the programming is still done through the diagnostic port. We ship the key worldwide from the UAE by DHL and FedEx; any automotive locksmith or the dealer can cut and program it.
- $28.08In Stock
- $28.09In Stock
- $4.20In Stock
- $4.21In Stock
- 2019-2021 Chevrolet Silverado GMC Sierra Smart Key Shell 5-button Tailgate HYQ1EA Aftermarket
SKU: B05736
$3.65In Stock - Chevrolet GMC Silverado Sierra Colorado 2019-2021 Remote 4-button 433MHz 22881479 Aftermarket
SKU: B06360
$9.83In Stock - Chevrolet GMC Silverado Sierra Colorado Canyon 2019-2023 Remote Key Shell 3-button Aftermarket
SKU: B06559
$3.09In Stock - Chevrolet Silverado 2019-2021 Smart Key Zinc Alloy Leather Key Case 5-button - Fits Key 13529632
SKU: B09056
$7.02In Stock - $56.18Out of Stock
Programming the Chevrolet Silverado 2019 key
Smart key (push to start)
3 tools list this key. 2 of them list all keys lost.
- OBDSTAR Key Master G3
- Add key
- All keys lost
- Remote
reads the PIN by OBD - XTOOL X100 PAD3 / X100 MAX
- Add key
- All keys lost
PIN read function - Universal key
Programming steps
Add key - on the car(US / Canada cars)
Needs: Keyless Access cars, with two working transmitters, two working transmitters, the new transmitter, the car switched off
- Pull the emergency key blade out of a working transmitter.
- Put the two working transmitters in the cupholder or on the passenger seat.
- Insert the key blade into the driver's door lock and turn it counterclockwise (UNLOCK) 5 times within 10 seconds. The DIC shows READY FOR REMOTE #2, 3, 4...
- Place the new transmitter in the transmitter pocket in the center console (in front of the storage area, between the front seats).
- Press ENGINE START/STOP. The DIC moves to the next remote number when the transmitter is learned.
- Take the transmitter out and press LOCK or UNLOCK on it.
- Repeat the last three steps for each extra transmitter.
- Hold ENGINE START/STOP for about 12 seconds to leave programming mode.
- Put the key blades back into the transmitters.
Add key - on the car(US / Canada cars)
Needs: Keyless Access cars, without two working transmitters, every transmitter the customer keeps, about 30 minutes, the car switched off
- Pull the key blade out of the transmitter.
- Insert the key blade into the driver's door lock and turn it counterclockwise (UNLOCK) 5 times within 10 seconds. The DIC shows REMOTE LEARN PENDING, PLEASE WAIT.
- After 10 minutes the cluster reads PRESS ENGINE START BUTTON TO LEARN: push ENGINE START/STOP, and the waiting message comes back.
- Repeat the 10-minute wait and button press two more times. The DIC then shows READY FOR REMOTE # 1.
- Place the new transmitter in the transmitter pocket in the center console (in front of the storage area, between the front seats).
- Press ENGINE START/STOP. The DIC moves to the next remote number when the transmitter is learned.
- Take the transmitter out and press LOCK or UNLOCK on it.
- Repeat the last three steps for each transmitter the customer keeps.
- Hold ENGINE START/STOP for about 12 seconds to leave programming mode.
- Put the key blades back into the transmitters.
Key with a blade (regular or flip)
3 tools list this key. 3 of them list all keys lost.
- OBDSTAR Key Master G3
- Add key
- All keys lost
- Remote
reads the PIN by OBD - Add key(US / Canada cars)
- All keys lost(US / Canada cars)
- XTOOL X100 PAD3 / X100 MAX
- Add key
- All keys lost
PIN read function
Programming steps
Add key - on the car(US / Canada cars)
Needs: two working keys, new key cut to the vehicle
- Cut the new key; have two different keys that already start the vehicle.
- Put the first working key in, turn to ON/RUN, then LOCK/OFF and remove it.
- Within five seconds put the second working key in, turn to ON/RUN, then LOCK/OFF and remove it.
- Within five seconds put the new key in and turn it to ON/RUN; the security light goes off when it is learned.
- Start the engine with the new key; repeat from step 2 for each further key.
Add key - Autel MaxiIM IM508 / IM608(US / Canada cars)
Needs: new key cut to the vehicle, PIN read by OBD (online), internet connection
- Connect the tool to OBD with an internet connection and a battery maintainer; identify the vehicle by VIN (automatic selection).
- Run the immobilizer status scan.
- Choose Add key; the tool reads the 4-digit PIN by OBD (online).
- Clear the trouble codes when the tool offers it.
- Insert the new key, turn ON and follow the ignition and driver-door prompts until the tool reports the key learned.
- Start the engine with every key.
All keys lost - on the car(US / Canada cars)
Needs: new keys cut to the vehicle, 30 minutes
- Cut the new key. Have every key the customer keeps; the old keys stop working at the end.
- Insert the new key and turn to ON/RUN without cranking; the security light comes on.
- Wait about 10 minutes until the security light goes off, then turn to LOCK/OFF.
- Repeat ON/RUN, wait 10 minutes, LOCK/OFF two more times (about 30 minutes in all).
- After the third cycle turn to ON/RUN: this key is learned and every previously known key is erased.
- Switch OFF, insert the second new key and turn it to ON/RUN to learn it; further keys then use the two-key procedure.
All keys lost - Autel MaxiIM IM508 / IM608(US / Canada cars)
Needs: new keys cut to the vehicle, PIN read by OBD (online), internet connection
- Connect the tool to OBD with an internet connection and a battery maintainer; identify the vehicle by VIN (automatic selection).
- Run the immobilizer status scan.
- Choose All keys lost; the tool reads the 4-digit PIN by OBD (online).
- Clear the trouble codes when offered.
- Learn the first key: ignition ON and follow the ignition / driver-door prompts until the tool confirms.
- Learn each further key the customer keeps in the same session, then test all of them.
Key type not stated by the list
One tool lists this key.
- Launch X-431 IMMO
- Add key
- All keys lost
PIN read function
Without a tool
The remote is programmed on the car, without a tool. Up to 8 remotes.
When the key changed
Smart key (push to start)
- 2019 - 2021This yearChip: ID46433 MHzBlade: HU100FCC: HYQ1EA, HYQ1ESPush-to-start trims; HYQ1EA first, HYQ1ES from 2021.
- 2022 - 2024Chip: ID49433 MHzBlade: HU100FCC: YG0G21TB2Hitag Pro key from the 2022 refresh.
Key with a blade (regular or flip)
- 1999 - 2006Chip: None (PassLock)(US / Canada cars)No chip in the key; PassLock sensor sits in the ignition lock.
- 2007 - 2013Chip: ID46Blade: B111(US / Canada cars)Circle Plus key; separate remote.
- 2014 - 2020This yearChip: ID46 Hitag2 ExtendedBlade: HU100(US / Canada cars)HU100 10-cut key; B111 keys do not fit.
Check coverage first: support depends on the tool's software version and the exact model. A tool that is not shown here may still cover this car.
Frequently asked questions
Which keys fit the Chevrolet Silverado 2019?
17 listings fit the Chevrolet Silverado 2019: smart keys, remote keys, transponder keys, key shells, emergency blades and key blanks, in 3-, 4- and 5-button versions. Match the part number or FCC ID printed on your original key with the specifications on each listing.
What frequency does the Chevrolet Silverado 2019 remote use?
Listings for the Chevrolet Silverado 2019 come in 315 MHz and 433 MHz: the frequency depends on the market the car was sold in, so check it against your original remote before ordering.
Which transponder chip does the Chevrolet Silverado 2019 key use?
The listings for this car carry: ID46 (HITAG 2). Check the chip in each listing's specifications.
Which FCC IDs do Chevrolet Silverado 2019 remotes carry?
The remotes listed for this car carry FCC ID HYQ1AA, HYQ1EA, HYQ1ES, M3N32337100 and M3N32337200. Match it with the FCC ID printed on your original remote.
Which blade profile does the Chevrolet Silverado 2019 key use?
The blades listed for this car: HU100.
Which tools program a Chevrolet Silverado 2019 key?
The tool makers' coverage lists name OBDSTAR Key Master G3, XTOOL X100 PAD3 / X100 MAX, Autel KM100 (IKEY universal smart key), Autel IM608 II / IM608 Pro II and Launch X-431 IMMO for this car; 4 of them list all keys lost. Check your tool's latest coverage list before the job.
Can the Chevrolet Silverado 2019 remote be programmed without a tool?
The remote is programmed on the car, without a tool. Up to 8 remotes.
















