Chevrolet Spark 2018 Key Fob & Car Keys
Keys that fit the 2018 Chevrolet Spark: smart keys and flip keys, 2 or 4 buttons, FCC ID 2A0UX13522778, 2A0UX or HYQ4EA, ID46 (HITAG 2) chip, 433 MHz. 6 compatible keys, remotes & shells (genuine and aftermarket) available for the 2018 Chevrolet Spark.
Last updated: 12 November 2026
Key specifications for the Chevrolet Spark 2018
- Key types
- smart keys, flip keys, key shells and emergency blades
- Frequency
- 433 MHz
- Buttons
- 2- and 4-button
- Transponder chip
- ID46 (HITAG 2)
- Blade profile
- HU100
- Part numbers
- 13530734
- Compatible FCC IDs
To pick the right part, match the part number or FCC ID printed on your original remote, or listed in the Chevrolet parts catalogue, with the specifications on each listing. Every remote listed for the Chevrolet Spark 2018 transmits on 433 MHz.
A new smart key or remote has to be programmed to the car with a key programmer, and when every key is lost the programming is still done through the diagnostic port. We ship the key worldwide from the UAE by DHL and FedEx; any automotive locksmith or the dealer can cut and program it.
- $3.65In Stock
- Chevrolet Camaro Malibu Equinox Traverse 2016-2021 Emergency Key Blade - HU100 for Smart Key
SKU: B01943
$1.40In Stock - Chevrolet Holden Equinox Spark 2016-2020 Smart Key Shell 2-Button Lock Unlock - HU100 Blade
SKU: B09117
$3.65In Stock - $35.11In Stock
Programming the Chevrolet Spark 2018 key
Smart key (push to start)
4 tools list this key. 2 of them list all keys lost.
- OBDSTAR Key Master G3
- Add key
- All keys lost
- Remote
reads the PIN by OBD - XTOOL X100 PAD3 / X100 MAX
- Add key
- All keys lost
PIN read function - Advanced Diagnostics Smart Pro
- Add key
- Universal key
All keys lost is listed by OBDSTAR Key Master G3 and XTOOL X100 PAD3 / X100 MAX. Advanced Diagnostics Smart Pro lists add key only.
Programming steps
Add key - on the car(US / Canada cars)
Needs: Keyless Access cars, with two working transmitters, two working transmitters, the new transmitter, the car switched off
- Put the two working transmitters in the transmitter pocket inside the center console storage area.
- Remove the lock cylinder cap on the driver's door handle, insert the key blade and turn it counterclockwise (UNLOCK) 5 times within 10 seconds. The DIC shows READY FOR REMOTE #2, 3, 4...
- Place the new transmitter in the transmitter pocket inside the center console storage area (buttons facing the rear).
- Press ENGINE START/STOP. The DIC moves to the next remote number when the transmitter is learned.
- Take the transmitter out and press UNLOCK on it.
- Repeat the last three steps for each extra transmitter.
- Hold ENGINE START/STOP for about 12 seconds to leave programming mode.
Add key - on the car(US / Canada cars)
Needs: Keyless Access cars, without two working transmitters, every transmitter the customer keeps, about 30 minutes, the car switched off
- Remove the lock cylinder cap on the driver's door handle, insert the key blade and turn it counterclockwise (UNLOCK) 5 times within 10 seconds. The DIC shows REMOTE LEARN PENDING, PLEASE WAIT.
- After 10 minutes the cluster reads PRESS ENGINE START BUTTON TO LEARN: push ENGINE START/STOP, and the waiting message comes back.
- Repeat the 10-minute wait and button press two more times. The DIC then shows READY FOR REMOTE # 1.
- Drop the new fob into its pocket in the center console bin.
- Press ENGINE START/STOP. The DIC moves to the next remote number when the transmitter is learned.
- Take the transmitter out and press UNLOCK on it.
- Repeat the last three steps for each transmitter the customer keeps.
- Hold ENGINE START/STOP for about 12 seconds to leave programming mode.
Add key - on the car(US / Canada cars)
Needs: two working smart keys, new smart key
- Have the vehicle off and every smart key (two working ones and the new ones) with you.
- Put the two working smart keys in the cupholder (or the place the owner's manual names).
- Remove the key blade, insert it in the driver door lock cylinder and turn to unlock five times within 10 seconds; the DIC shows READY FOR REMOTE #2, 3...
- Place the new smart key in the transmitter pocket and press ENGINE START/STOP; the DIC shows it is ready for the next one.
- Take the key out of the pocket and press lock or unlock on it.
- Repeat steps 4-5 for each new key, then hold ENGINE START/STOP about 12 seconds to leave programming mode.
All keys lost - on the car(US / Canada cars)
Needs: every smart key to be kept, 30 minutes
- Have every smart key the customer keeps with you; the blade of the new key must be cut if no key works.
- With the vehicle off, insert the key blade in the driver door lock cylinder and turn to unlock five times within 10 seconds; the DIC shows REMOTE LEARN PENDING, PLEASE WAIT.
- Wait about 10 minutes until the DIC shows PRESS ENGINE START BUTTON TO LEARN, then press ENGINE START/STOP.
- Repeat the 10-minute wait and button press two more times (about 30 minutes in all); the DIC then shows READY FOR REMOTE #1.
- Place a smart key in the transmitter pocket and press ENGINE START/STOP; the DIC moves to the next number.
- Take it out, press lock or unlock, and repeat for every key the customer keeps.
- Hold ENGINE START/STOP about 12 seconds to leave programming mode, then test every key.
Key with a blade (regular or flip)
3 tools list this key. 2 of them list all keys lost.
- OBDSTAR Key Master G3
- Add key
- All keys lost
- Remote
reads the PIN by OBD - XTOOL X100 PAD3 / X100 MAX
- Add key
- All keys lost
- Remote(non-US cars)
PIN read function - Advanced Diagnostics Smart Pro
- Add key
All keys lost is listed by OBDSTAR Key Master G3 and XTOOL X100 PAD3 / X100 MAX. Advanced Diagnostics Smart Pro lists add key only.
Programming steps
Add key - on the car(US / Canada cars)
Needs: Two working keys available, two working programmed keys, the new key cut to the car
- Insert the first working key and turn the ignition to ON/RUN.
- Turn the ignition to LOCK/OFF and pull the key out.
- Within 5 seconds, insert the second working key and turn to ON/RUN.
- Turn to LOCK/OFF and pull the key out.
- Within 5 seconds, insert the new key and turn to ON/RUN. The security light goes out when the key is learned.
- For each extra key, repeat the whole sequence from the first step.
Add key - on the car(US / Canada cars)
Needs: No two working keys available, every key the customer keeps, cut to the car, about 30 minutes for the first key
- Insert the new key and turn the ignition to ON/RUN. The security light comes on.
- Wait 10 minutes until the security light goes out.
- Turn the ignition to LOCK/OFF.
- Repeat the ON/RUN / wait / LOCK/OFF cycle two more times (three cycles in total).
- Turn to ON/RUN again: the key is now learned.
- Turn to LOCK/OFF, insert the second key and turn to ON/RUN to learn it.
- Add any further keys with the two-key method.
Add key - on the car(US / Canada cars)
Needs: two working keys, new key cut to the vehicle
- Cut the new key; have two different keys that already start the vehicle.
- Put the first working key in, turn to ON/RUN, then LOCK/OFF and remove it.
- Within five seconds put the second working key in, turn to ON/RUN, then LOCK/OFF and remove it.
- Within five seconds put the new key in and turn it to ON/RUN; the security light goes off when it is learned.
- Start the engine with the new key; repeat from step 2 for each further key.
All keys lost - on the car(US / Canada cars)
Needs: new keys cut to the vehicle, 30 minutes
- Cut the new key. Have every key the customer keeps; the old keys stop working at the end.
- Insert the new key and turn to ON/RUN without cranking; the security light comes on.
- Wait about 10 minutes until the security light goes off, then turn to LOCK/OFF.
- Repeat ON/RUN, wait 10 minutes, LOCK/OFF two more times (about 30 minutes in all).
- After the third cycle turn to ON/RUN: this key is learned and every previously known key is erased.
- Switch OFF, insert the second new key and turn it to ON/RUN to learn it; further keys then use the two-key procedure.
Key type not stated by the list
One tool lists this key.
- Launch X-431 IMMO
- Add key
- All keys lost
Without a tool
The remote is programmed on the car, without a tool. Up to 8 remotes.
When the key changed
Smart key (push to start)
- 2016 - 2022This yearChip: ID46315 MHzFCC: HYQ4AA(US / Canada cars)Push-to-start trims only.
Key with a blade (regular or flip)
- 2013 - 2015Chip: ID46315 MHzFCC: A2GM3AFUS03(US / Canada cars)Flip key of the first US Spark.
- 2016 - 2022This yearChip: ID46315 MHzFCC: LXP-T003(US / Canada cars)Flip key; LXP-T003 on 2019-2022 keys, read the FCC ID on earlier ones.
Check coverage first: support depends on the tool's software version and the exact model. A tool that is not shown here may still cover this car.
Frequently asked questions
Which keys fit the Chevrolet Spark 2018?
6 listings fit the Chevrolet Spark 2018: smart keys, flip keys, key shells and emergency blades, in 2- and 4-button versions. Match the part number or FCC ID printed on your original key with the specifications on each listing.
What frequency does the Chevrolet Spark 2018 remote use?
Every remote listed for the Chevrolet Spark 2018 transmits on 433 MHz.
Which transponder chip does the Chevrolet Spark 2018 key use?
The listings for this car carry: ID46 (HITAG 2). Check the chip in each listing's specifications.
Which FCC IDs do Chevrolet Spark 2018 remotes carry?
The remotes listed for this car carry FCC ID 2A0UX, 2A0UX13522778 and HYQ4EA. Match it with the FCC ID printed on your original remote.
Which blade profile does the Chevrolet Spark 2018 key use?
The blades listed for this car: HU100.
Which tools program a Chevrolet Spark 2018 key?
The tool makers' coverage lists name OBDSTAR Key Master G3, XTOOL X100 PAD3 / X100 MAX, Advanced Diagnostics Smart Pro, Autel KM100 (IKEY universal smart key) and Launch X-431 IMMO for this car; 3 of them list all keys lost. Check your tool's latest coverage list before the job.
Can the Chevrolet Spark 2018 remote be programmed without a tool?
The remote is programmed on the car, without a tool. Up to 8 remotes.





