Chevrolet Tahoe 2000 Key Fob & Car Keys
Keys that fit the 2000 Chevrolet Tahoe: smart keys and remote keys, 3 buttons, FCC ID AB01502T or K0BUT1BT, 315 MHz. 3 compatible keys, remotes & shells (genuine and aftermarket) available for the 2000 Chevrolet Tahoe.
Last updated: 6 November 2026
Key specifications for the Chevrolet Tahoe 2000
- Key types
- smart keys, remote keys and key shells
- Frequency
- 315 MHz
- Buttons
- 3-button
- Battery
- CR2032
To pick the right part, match the part number or FCC ID printed on your original remote, or listed in the Chevrolet parts catalogue, with the specifications on each listing. Every remote listed for the Chevrolet Tahoe 2000 transmits on 315 MHz.
A new smart key or remote has to be programmed to the car with a key programmer, and when every key is lost the programming is still done through the diagnostic port. We ship the key worldwide from the UAE by DHL and FedEx; any automotive locksmith or the dealer can cut and program it.
- $7.01In Stock
- $1.12In Stock
Programming the Chevrolet Tahoe 2000 key
Key type not stated by the list
One tool lists this key.
- Launch X-431 IMMO
- Add key
- All keys lost
Without a tool
The remote is programmed on the car, without a tool.
Programming steps
Program the remote without a tool(US / Canada cars)
Needs: Remote FCC ID ABO1502T, a jumper wire, every remote the customer keeps
- Find the data link connector (OBD-II) under the dash on the driver's side and identify pins 8 and 4.
- Check that terminals 8 and 4 have metal pins, then bridge 8 to 4 with the jumper wire and leave it connected. The door locks cycle to show programming mode.
- On the first remote, hold LOCK and UNLOCK together for about 15 seconds until the door locks cycle, then release.
- Within one minute, repeat the previous step on each remaining remote.
- Remove the jumper wire from the port.
Program the remote without a tool(US / Canada cars)
Needs: Remote FCC ID KOBUT1BT, every remote the customer keeps, a working key for the ignition
- Close all doors and insert the key in the ignition.
- Press and keep holding the power UNLOCK switch on the driver's door panel.
- Still holding it, quickly turn the ignition ON (engine not started), OFF, ON, OFF.
- Release the UNLOCK switch. The door locks cycle to confirm programming mode.
- On the first remote, hold LOCK and UNLOCK together until the door locks cycle (up to 30 seconds).
- Repeat the previous step right away on every other remote, old ones included.
- Turn the ignition ON to leave programming mode.
When the key changed
Smart key (push to start)
- 2015 - 2020Chip: ID46Blade: HU100FCC: HYQ1AA, HYQ1EAHYQ1AA is 315 MHz, HYQ1EA is 433 MHz: read the FCC ID.
- 2021 - 2024Chip: ID49433 MHzBlade: HU100FCC: YG0G21TB2Hitag Pro key, not compatible with the 2015-2020 ID46 key.
Key with a blade (regular or flip)
- 1998 - 2006This yearChip: None (PassLock)(US / Canada cars)No chip in the key; PassLock sensor sits in the ignition lock.
- 2007 - 2014Chip: ID46Blade: B111(US / Canada cars)Circle Plus key.
- 2015 - 2020Chip: ID46 Hitag2 ExtendedBlade: HU100(US / Canada cars)Key-start trims; HU100 blade.
Check coverage first: support depends on the tool's software version and the exact model. A tool that is not shown here may still cover this car.
Frequently asked questions
Which keys fit the Chevrolet Tahoe 2000?
3 listings fit the Chevrolet Tahoe 2000: smart keys, remote keys and key shells, in 3-button versions. Match the part number or FCC ID printed on your original key with the specifications on each listing.
What frequency does the Chevrolet Tahoe 2000 remote use?
Every remote listed for the Chevrolet Tahoe 2000 transmits on 315 MHz.
Which FCC IDs do Chevrolet Tahoe 2000 remotes carry?
The remotes listed for this car carry FCC ID AB01502T and K0BUT1BT. Match it with the FCC ID printed on your original remote.
Which tools program a Chevrolet Tahoe 2000 key?
The tool makers' coverage lists name Launch X-431 IMMO for this car; 1 of them lists all keys lost. Check your tool's latest coverage list before the job.
Can the Chevrolet Tahoe 2000 remote be programmed without a tool?
The remote is programmed on the car, without a tool.


