Chevrolet Trailblazer 2022 Key Fob & Car Keys
Keys that fit the 2022 Chevrolet Trailblazer: smart keys, flip keys and remote keys, 4 or 5 buttons, FCC ID HYQ4EA, HYQ4ES or LXPT004, ID46E (GM extended) chip, 433 MHz. 8 compatible keys, remotes & shells (genuine and aftermarket) available for the 2022 Chevrolet Trailblazer.
Last updated: 12 November 2026
Key specifications for the Chevrolet Trailblazer 2022
- Key types
- smart keys, flip keys, remote keys, key shells and emergency blades
- Frequency
- 433 MHz
- Buttons
- 4- and 5-button
- Transponder chip
- ID46E (GM extended)
- Blade profile
- HU100
- Part numbers
- 13530746 · 13529636
- Battery
- CR2032
To pick the right part, match the part number or FCC ID printed on your original remote, or listed in the Chevrolet parts catalogue, with the specifications on each listing. Every remote listed for the Chevrolet Trailblazer 2022 transmits on 433 MHz.
A new smart key or remote has to be programmed to the car with a key programmer, and when every key is lost the programming is still done through the diagnostic port. We ship the key worldwide from the UAE by DHL and FedEx; any automotive locksmith or the dealer can cut and program it.
- $3.65In Stock
- $0.55In Stock
- $3.65In Stock
- $9.83In Stock
Programming the Chevrolet Trailblazer 2022 key
Smart key (push to start)
4 tools list this key. 3 of them list all keys lost.
- OBDSTAR Key Master G3
- Add key
- All keys lost
- Remote
reads the PIN by OBD - Add key
- All keys lost
PIN read function- XTOOL X100 PAD3 / X100 MAX
- Add key
- All keys lost
PIN read function - Universal key
Programming steps
Add key - on the car(US / Canada cars)
Needs: two working smart keys, new smart key
- Have the vehicle off and every smart key (two working ones and the new ones) with you.
- Put the two working smart keys in the cupholder (or the place the owner's manual names).
- Remove the key blade, insert it in the driver door lock cylinder and turn to unlock five times within 10 seconds; the DIC shows READY FOR REMOTE #2, 3...
- Place the new smart key in the transmitter pocket and press ENGINE START/STOP; the DIC shows it is ready for the next one.
- Take the key out of the pocket and press lock or unlock on it.
- Repeat steps 4-5 for each new key, then hold ENGINE START/STOP about 12 seconds to leave programming mode.
All keys lost - on the car(US / Canada cars)
Needs: every smart key to be kept, 30 minutes
- Have every smart key the customer keeps with you; the blade of the new key must be cut if no key works.
- With the vehicle off, insert the key blade in the driver door lock cylinder and turn to unlock five times within 10 seconds; the DIC shows REMOTE LEARN PENDING, PLEASE WAIT.
- Wait about 10 minutes until the DIC shows PRESS ENGINE START BUTTON TO LEARN, then press ENGINE START/STOP.
- Repeat the 10-minute wait and button press two more times (about 30 minutes in all); the DIC then shows READY FOR REMOTE #1.
- Place a smart key in the transmitter pocket and press ENGINE START/STOP; the DIC moves to the next number.
- Take it out, press lock or unlock, and repeat for every key the customer keeps.
- Hold ENGINE START/STOP about 12 seconds to leave programming mode, then test every key.
Key with a blade (regular or flip)
2 tools list this key. 2 of them list all keys lost.
- OBDSTAR Key Master G3
- Add key
- All keys lost
- Remote
reads the PIN by OBD - XTOOL X100 PAD3 / X100 MAX
- Add key
- All keys lost
PIN read function
Programming steps
Add key - on the car(US / Canada cars)
Needs: two working keys, new key cut to the vehicle
- Cut the new key; have two different keys that already start the vehicle.
- Put the first working key in, turn to ON/RUN, then LOCK/OFF and remove it.
- Within five seconds put the second working key in, turn to ON/RUN, then LOCK/OFF and remove it.
- Within five seconds put the new key in and turn it to ON/RUN; the security light goes off when it is learned.
- Start the engine with the new key; repeat from step 2 for each further key.
All keys lost - on the car(US / Canada cars)
Needs: new keys cut to the vehicle, 30 minutes
- Cut the new key. Have every key the customer keeps; the old keys stop working at the end.
- Insert the new key and turn to ON/RUN without cranking; the security light comes on.
- Wait about 10 minutes until the security light goes off, then turn to LOCK/OFF.
- Repeat ON/RUN, wait 10 minutes, LOCK/OFF two more times (about 30 minutes in all).
- After the third cycle turn to ON/RUN: this key is learned and every previously known key is erased.
- Switch OFF, insert the second new key and turn it to ON/RUN to learn it; further keys then use the two-key procedure.
Key type not stated by the list
One tool lists this key.
- Launch X-431 IMMO
- Add key
PIN read function
When the key changed
Smart key (push to start)
- 2021 - 2022This yearChip: ID46433 MHzFCC: HYQ4EA(US / Canada cars)HYQ4EA fob; HYQ4ES fobs (2021-2025): chip not settled, read the old key.
Key with a blade (regular or flip)
- 2002 - 2009Chip: None (PassLock)(US / Canada cars)No chip in the key; PassLock sensor sits in the ignition lock.
- 2021 - 2025This yearChip: ID46 Hitag2 Extended433 MHzFCC: LXP-T004(US / Canada cars)Flip key on key-start trims; 433 MHz on US cars too.
Check coverage first: support depends on the tool's software version and the exact model. A tool that is not shown here may still cover this car.
Frequently asked questions
Which keys fit the Chevrolet Trailblazer 2022?
8 listings fit the Chevrolet Trailblazer 2022: smart keys, flip keys, remote keys, key shells and emergency blades, in 4- and 5-button versions. Match the part number or FCC ID printed on your original key with the specifications on each listing.
What frequency does the Chevrolet Trailblazer 2022 remote use?
Every remote listed for the Chevrolet Trailblazer 2022 transmits on 433 MHz.
Which transponder chip does the Chevrolet Trailblazer 2022 key use?
The listings for this car carry: ID46E (GM extended). Check the chip in each listing's specifications.
Which FCC IDs do Chevrolet Trailblazer 2022 remotes carry?
The remotes listed for this car carry FCC ID HYQ4EA, HYQ4ES and LXPT004. Match it with the FCC ID printed on your original remote.
Which blade profile does the Chevrolet Trailblazer 2022 key use?
The blades listed for this car: HU100.
Which tools program a Chevrolet Trailblazer 2022 key?
The tool makers' coverage lists name OBDSTAR Key Master G3, Lonsdor K518, XTOOL X100 PAD3 / X100 MAX, Autel KM100 (IKEY universal smart key) and Launch X-431 IMMO for this car; 3 of them list all keys lost. Check your tool's latest coverage list before the job.







