Chevrolet Traverse 2018 Key Fob & Car Keys
Keys that fit the 2018 Chevrolet Traverse: smart keys, flip keys and remote keys, 3, 4 or 5 buttons, FCC ID HYQ4EA, 0HT05918179 or HYQ4AA, ID46E (GM extended) or ID46 (HITAG 2) chip, 315 MHz or 433 MHz. 12 compatible keys, remotes & shells (genuine and aftermarket) available for the 2018 Chevrolet Traverse.
Last updated: 17 November 2026
Key specifications for the Chevrolet Traverse 2018
- Key types
- smart keys, flip keys, remote keys, key shells and emergency blades
- Frequency
- 315 MHz and 433 MHz
- Buttons
- 3-, 4- and 5-button
- Transponder chip
- ID46E (GM extended) · ID46 (HITAG 2)
- Blade profile
- HU100
- Part numbers
- 13529636
- Battery
- CR2032
- Compatible FCC IDs
To pick the right part, match the part number or FCC ID printed on your original remote, or listed in the Chevrolet parts catalogue, with the specifications on each listing. The frequency depends on the market the car was sold in, so check 315 MHz and 433 MHz against your original before ordering.
A new smart key or remote has to be programmed to the car with a key programmer, and when every key is lost the programming is still done through the diagnostic port. We ship the key worldwide from the UAE by DHL and FedEx; any automotive locksmith or the dealer can cut and program it.
- $23.87In Stock
- $3.65In Stock
- $3.65In Stock
- Chevrolet 2014–2020 Peps Flip Remote Smart Key 5-button 315MHz - OHT05918179, 5921873, HU100
SKU: B05740
$11.24In Stock - $16.85In Stock
- Chevrolet Camaro Malibu Equinox Traverse 2016-2021 Emergency Key Blade - HU100 for Smart Key
SKU: B01943
$1.40In Stock - Chevrolet Equinox Traverse Blazer 2018-2021 Smart Key Shell 3-Button with Hatch - HU100 Blade
SKU: B05150
$2.81In Stock
Programming the Chevrolet Traverse 2018 key
Smart key (push to start)
5 tools list this key. 2 of them list all keys lost.
- OBDSTAR Key Master G3
- Add key
- All keys lost
- Remote
reads the PIN by OBD - XTOOL X100 PAD3 / X100 MAX
- Add key
- All keys lost
PIN read function - Universal key
- Universal key
- Universal key
Programming steps
Add key - on the car(US / Canada cars)
Needs: Keyless Access cars, with two working transmitters, two working transmitters, the new transmitter, the car switched off
- Pull the emergency key blade out of a working transmitter.
- Put the two working transmitters in the cupholder.
- Remove the lock cylinder cap on the driver's door handle, insert the key blade and turn it counterclockwise (UNLOCK) 5 times within 10 seconds. The DIC shows READY FOR REMOTE #2, 3, 4...
- Place the new transmitter in the transmitter pocket inside the center console storage area, under the liner.
- Press ENGINE START/STOP. The DIC moves to the next remote number when the transmitter is learned.
- Take the transmitter out and press LOCK or UNLOCK on it.
- Repeat the last three steps for each extra transmitter.
- Hold ENGINE START/STOP for about 12 seconds to leave programming mode.
- Put the key blades back into the transmitters.
- Refit the lock cylinder cap on the door handle.
Add key - on the car(US / Canada cars)
Needs: Keyless Access cars, without two working transmitters, every transmitter the customer keeps, about 30 minutes, the car switched off
- Pull the key blade out of the transmitter.
- Remove the lock cylinder cap on the driver's door handle, insert the key blade and turn it counterclockwise (UNLOCK) 5 times within 10 seconds. The DIC shows REMOTE LEARN PENDING, PLEASE WAIT.
- After 10 minutes the cluster reads PRESS ENGINE START BUTTON TO LEARN: push ENGINE START/STOP, and the waiting message comes back.
- Repeat the 10-minute wait and button press two more times. The DIC then shows READY FOR REMOTE # 1.
- Place the new transmitter in the transmitter pocket inside the center console storage area, under the liner.
- Press ENGINE START/STOP. The DIC moves to the next remote number when the transmitter is learned.
- Take the transmitter out and press LOCK or UNLOCK on it.
- Repeat the last three steps for each transmitter the customer keeps.
- Hold ENGINE START/STOP for about 12 seconds to leave programming mode.
- Put the key blades back into the transmitters.
- Refit the lock cylinder cap on the door handle.
Add key - on the car(US / Canada cars)
Needs: two working smart keys, new smart key
- Have the vehicle off and every smart key (two working ones and the new ones) with you.
- Put the two working smart keys in the cupholder (or the place the owner's manual names).
- Remove the key blade, insert it in the driver door lock cylinder and turn to unlock five times within 10 seconds; the DIC shows READY FOR REMOTE #2, 3...
- Place the new smart key in the transmitter pocket and press ENGINE START/STOP; the DIC shows it is ready for the next one.
- Take the key out of the pocket and press lock or unlock on it.
- Repeat steps 4-5 for each new key, then hold ENGINE START/STOP about 12 seconds to leave programming mode.
All keys lost - on the car(US / Canada cars)
Needs: every smart key to be kept, 30 minutes
- Have every smart key the customer keeps with you; the blade of the new key must be cut if no key works.
- With the vehicle off, insert the key blade in the driver door lock cylinder and turn to unlock five times within 10 seconds; the DIC shows REMOTE LEARN PENDING, PLEASE WAIT.
- Wait about 10 minutes until the DIC shows PRESS ENGINE START BUTTON TO LEARN, then press ENGINE START/STOP.
- Repeat the 10-minute wait and button press two more times (about 30 minutes in all); the DIC then shows READY FOR REMOTE #1.
- Place a smart key in the transmitter pocket and press ENGINE START/STOP; the DIC moves to the next number.
- Take it out, press lock or unlock, and repeat for every key the customer keeps.
- Hold ENGINE START/STOP about 12 seconds to leave programming mode, then test every key.
Key type not stated by the list
One tool lists this key.
- Launch X-431 IMMO
- Add key
Without a tool
The remote is programmed on the car, without a tool. Up to 8 remotes.
When the key changed
Smart key (push to start)
- 2018 - 2020This yearChip: ID46433 MHzBlade: HU100FCC: HYQ4EA(US / Canada cars)2021-2023 fobs carry HYQ4ES: chip not settled, read the old key.
- from 2024Chip: ID49433 MHzFCC: YG0G21TB2(US / Canada cars)Hitag Pro key from the 2024 redesign.
Key with a blade (regular or flip)
- 2009 - 2017Chip: ID46Blade: B111(US / Canada cars)Circle Plus key; separate remote.
Check coverage first: support depends on the tool's software version and the exact model. A tool that is not shown here may still cover this car.
Frequently asked questions
Which keys fit the Chevrolet Traverse 2018?
12 listings fit the Chevrolet Traverse 2018: smart keys, flip keys, remote keys, key shells and emergency blades, in 3-, 4- and 5-button versions. Match the part number or FCC ID printed on your original key with the specifications on each listing.
What frequency does the Chevrolet Traverse 2018 remote use?
Listings for the Chevrolet Traverse 2018 come in 315 MHz and 433 MHz: the frequency depends on the market the car was sold in, so check it against your original remote before ordering.
Which transponder chip does the Chevrolet Traverse 2018 key use?
The listings for this car carry: ID46E (GM extended) · ID46 (HITAG 2). Check the chip in each listing's specifications.
Which FCC IDs do Chevrolet Traverse 2018 remotes carry?
The remotes listed for this car carry FCC ID 0HT05918179, HYQ4AA and HYQ4EA. Match it with the FCC ID printed on your original remote.
Which blade profile does the Chevrolet Traverse 2018 key use?
The blades listed for this car: HU100.
Which tools program a Chevrolet Traverse 2018 key?
The tool makers' coverage lists name OBDSTAR Key Master G3, XTOOL X100 PAD3 / X100 MAX, Autel KM100 (IKEY universal smart key), Xhorse VVDI Key Tool Max, Xhorse VVDI Key Tool Plus and Launch X-431 IMMO for this car; 2 of them list all keys lost. Check your tool's latest coverage list before the job.
Can the Chevrolet Traverse 2018 remote be programmed without a tool?
The remote is programmed on the car, without a tool. Up to 8 remotes.











