Chevrolet Trax 2016 Key Fob & Car Keys
Keys that fit the 2016 Chevrolet Trax: flip keys, remote keys and transponder keys, 2 or 3 buttons, FCC ID 0HT01060512, ID46E (GM extended) or ID46 (HITAG 2) chip, 315 MHz. 11 compatible keys, remotes & shells (genuine and aftermarket) available for the 2016 Chevrolet Trax.
Last updated: 18 November 2026
Key specifications for the Chevrolet Trax 2016
- Key types
- flip keys, remote keys, transponder keys, key shells and emergency blades
- Frequency
- 315 MHz
- Buttons
- 2- and 3-button
- Transponder chip
- ID46E (GM extended) · ID46 (HITAG 2)
- Blade profile
- HU100
- Battery
- CR2032
- Compatible FCC IDs
To pick the right part, match the part number or FCC ID printed on your original remote, or listed in the Chevrolet parts catalogue, with the specifications on each listing. Every remote listed for the Chevrolet Trax 2016 transmits on 315 MHz.
A new smart key or remote has to be programmed to the car with a key programmer, and when every key is lost the programming is still done through the diagnostic port. We ship the key worldwide from the UAE by DHL and FedEx; any automotive locksmith or the dealer can cut and program it.
Programming the Chevrolet Trax 2016 key
Key with a blade (regular or flip)
3 tools list this key. 3 of them list all keys lost.
- OBDSTAR Key Master G3
- Add key
- All keys lost
- Remote
reads the PIN by OBD - Add key
- All keys lost
PIN read function- XTOOL X100 PAD3 / X100 MAX
- Add key
- All keys lost
PIN read function
Programming steps
Add key - on the car(US / Canada cars)
Needs: One working key available, one working programmed key, the new key cut to the car
- Insert the working key and turn it to ON/RUN.
- Turn it to LOCK/OFF and pull it out.
- Within 5 seconds, insert the new key and turn it to ON/RUN. The security light goes out when the key is learned.
- Repeat the three steps for each extra key.
Add key - on the car(US / Canada cars)
Needs: No working key available, the new key cut to the car, about 30 minutes for the first key
- Insert the new key and turn it to ON/RUN. The security light comes on.
- Wait 10 minutes until the security light goes out.
- Turn the ignition to LOCK/OFF.
- Repeat the ON/RUN / wait / LOCK/OFF cycle two more times (three cycles in total).
- Turn to ON/RUN again: the key is now learned.
- Add any further keys with the one working key method.
Add key - on the car(US / Canada cars)
Needs: one working key, new key cut to the vehicle
- Cut the new key to the vehicle; have one key that already starts it.
- Put the working key in the ignition and turn it to ON/RUN (or start the engine), then turn it to LOCK/OFF and remove it.
- Within five seconds insert the new key and turn it to ON/RUN.
- The security light goes off when the key is learned (this can be too fast to notice).
- Start the engine with the new key; for each further key repeat from step 2.
Key type not stated by the list
One tool lists this key.
- Launch X-431 IMMO
- Add key
When the key changed
Smart key (push to start)
- 2017 - 2020Chip: ID46315 MHzFCC: HYQ4AA(US / Canada cars)Push-to-start trims only.
Key with a blade (regular or flip)
- 2013 - 2020This yearChip: ID46433 MHz(GCC / Europe cars)Non-US Trax (Opel Mokka twin) flip key, 433 MHz.
- 2015 - 2022This yearChip: ID46 Hitag2 Extended315 MHzBlade: HU100FCC: OHT01060512, LXP-T003(US / Canada cars)Flip key; some 2019-2022 cars carry LXP-T003 with the same chip.
- from 2024Chip: ID46 Hitag2 Extended433 MHzFCC: LXP-T004(US / Canada cars)Second-generation Trax, key-start trims; the push-start fob is a separate key.
Check coverage first: support depends on the tool's software version and the exact model. A tool that is not shown here may still cover this car.
Frequently asked questions
Which keys fit the Chevrolet Trax 2016?
11 listings fit the Chevrolet Trax 2016: flip keys, remote keys, transponder keys, key shells and emergency blades, in 2- and 3-button versions. Match the part number or FCC ID printed on your original key with the specifications on each listing.
What frequency does the Chevrolet Trax 2016 remote use?
Every remote listed for the Chevrolet Trax 2016 transmits on 315 MHz.
Which transponder chip does the Chevrolet Trax 2016 key use?
The listings for this car carry: ID46E (GM extended) · ID46 (HITAG 2). Check the chip in each listing's specifications.
Which FCC IDs do Chevrolet Trax 2016 remotes carry?
The remotes listed for this car carry FCC ID 0HT01060512. Match it with the FCC ID printed on your original remote.
Which blade profile does the Chevrolet Trax 2016 key use?
The blades listed for this car: HU100.
Which tools program a Chevrolet Trax 2016 key?
The tool makers' coverage lists name OBDSTAR Key Master G3, Lonsdor K518, XTOOL X100 PAD3 / X100 MAX and Launch X-431 IMMO for this car; 3 of them list all keys lost. Check your tool's latest coverage list before the job.










