Skip to content

Chrysler 300C 2007 Key Fob & Car Keys

Keys that fit the 2005–2007 Chrysler 300C: remote keys and transponder keys, 3 buttons, ID46 (HITAG 2) or CN3 cloning chip chip, 433 MHz. 3 compatible keys, remotes & shells (genuine and aftermarket) available for the 2007 Chrysler 300C.

Last updated: 10 November 2026

Key specifications for the Chrysler 300C 2005–2007

Key types
remote keys and transponder keys
Frequency
433 MHz
Buttons
3-button
Transponder chip
ID46 (HITAG 2) · CN3 cloning chip
Part numbers
For Mopar 05183350AA / 05183350AB
Battery
CR2025

To pick the right part, match the part number or FCC ID printed on your original remote, or listed in the Chrysler parts catalogue, with the specifications on each listing. Every remote listed for the Chrysler 300C 2005–2007 transmits on 433 MHz.

A new smart key or remote has to be programmed to the car with a key programmer, and when every key is lost the programming is still done through the diagnostic port. We ship the key worldwide from the UAE by DHL and FedEx; any automotive locksmith or the dealer can cut and program it.

Programming the Chrysler 300C 2007 key

Key with a blade (regular or flip)

3 tools list this key. 2 of them list all keys lost.

  • OBDSTAR Key Master G3
    • Add key
    • All keys lost
    • Remote
    reads the PIN by OBD
  • XTOOL X100 PAD3 / X100 MAX
    • Add key
    • All keys lost
    • Remote
    PIN read function
    • Add key
    • Remote
    PIN read function

All keys lost is listed by OBDSTAR Key Master G3 and XTOOL X100 PAD3 / X100 MAX. Lonsdor K518 lists add key only.

Programming steps

Add key - on the car(US / Canada cars)

Needs: two working keys, new blank transponder key cut to the vehicle

  1. Cut the new (never programmed) transponder key to the ignition; have two different keys that already start the vehicle.
  2. Insert the first working key and turn to ON for at least 3 but no more than 15 seconds, then turn OFF and remove it.
  3. Within 15 seconds insert the second working key and turn to ON; after about 10 seconds a chime sounds and the security light flashes. Turn OFF and remove it.
  4. Within 60 seconds (stay under 50 to be safe) insert the new blank key and turn to ON.
  5. After about 10 seconds a single chime sounds, the light stops flashing, stays on about 3 seconds and goes off: the key is learned.
  6. For each further key start again from step 2.
Watch out: Needs two different working keys; with one key or none use a tool (it reads the PIN). The new key must be blank: a key already learned to another vehicle is refused. Up to eight keys. On a remote head key or Fobik the remote learns in the same procedure.

When the key changed

Smart key (push to start)

  • 2011 - 2018Chip: ID46433 MHzFCC: M3N-40821302Hitag2 smart key; 4A fobs share the same FCC ID.
  • 2019 - 2023Chip: Hitag AES (4A)433 MHzFCC: M3N-40821302Same FCC ID as the ID46 fob: read the chip first.

Key with a blade (regular or flip)

  • 2005 - 2007This yearChip: ID46Blade: Y164FCC: KOBDT04ARemote head key (SKREEM).
  • 2008 - 2010Chip: ID46433 MHzFCC: IYZ-C01CFobik: the fob goes into the dash slot and turns, no blade.

Check coverage first: support depends on the tool's software version and the exact model. A tool that is not shown here may still cover this car.

Frequently asked questions

Which keys fit the Chrysler 300C 2005–2007?

3 listings fit the Chrysler 300C 2005–2007: remote keys and transponder keys, in 3-button versions. Match the part number or FCC ID printed on your original key with the specifications on each listing.

What frequency does the Chrysler 300C 2005–2007 remote use?

Every remote listed for the Chrysler 300C 2005–2007 transmits on 433 MHz.

Which transponder chip does the Chrysler 300C 2005–2007 key use?

The listings for this car carry: ID46 (HITAG 2) · CN3 cloning chip. Check the chip in each listing's specifications.

Which tools program a Chrysler 300C 2005–2007 key?

The tool makers' coverage lists name OBDSTAR Key Master G3, XTOOL X100 PAD3 / X100 MAX and Lonsdor K518 for this car; 2 of them list all keys lost. Check your tool's latest coverage list before the job.