Skip to content

Chrysler 300M 2002 Key Fob & Car Keys

Keys that fit the 2001–2002 Chrysler 300M: smart keys, remote keys and transponder keys, 4 buttons, 4D-64 chip. 4 compatible keys, remotes & shells (genuine and aftermarket) available for the 2002 Chrysler 300M.

Last updated: 9 November 2026

Key specifications for the Chrysler 300M 2001–2002

Key types
smart keys, remote keys, transponder keys, key shells, emergency blades and key blanks
Buttons
4-button
Transponder chip
4D-64
Part numbers
Strattec 5905612

To pick the right part, match the part number or FCC ID printed on your original remote, or listed in the Chrysler parts catalogue, with the specifications on each listing.

A new smart key or remote has to be programmed to the car with a key programmer, and when every key is lost the programming is still done through the diagnostic port. We ship the key worldwide from the UAE by DHL and FedEx; any automotive locksmith or the dealer can cut and program it.

Programming the Chrysler 300M 2002 key

Key with a blade (regular or flip)

Programming steps

Add key - on the car(US / Canada cars)

Needs: two working keys, new blank transponder key cut to the vehicle

  1. Cut the new (never programmed) transponder key to the ignition; have two different keys that already start the vehicle.
  2. Insert the first working key and turn to ON for at least 3 but no more than 15 seconds, then turn OFF and remove it.
  3. Within 15 seconds insert the second working key and turn to ON; after about 10 seconds a chime sounds and the security light flashes. Turn OFF and remove it.
  4. Within 60 seconds (stay under 50 to be safe) insert the new blank key and turn to ON.
  5. After about 10 seconds a single chime sounds, the light stops flashing, stays on about 3 seconds and goes off: the key is learned.
  6. For each further key start again from step 2.
Watch out: Needs two different working keys; with one key or none use a tool (it reads the PIN). The new key must be blank: a key already learned to another vehicle is refused. Up to eight keys. If the car has no Sentry Key light (no immobilizer fitted), a cut key is enough. The customer learn works only on US-market vehicles; a GCC or export car needs a tool.

Without a tool

The remote is programmed on the car, without a tool.

Programming steps

Program the remote without a tool(US / Canada cars)

Needs: one working remote, the key, all remotes to be kept

  1. Bring every remote the customer keeps, including at least one that already works; entering the mode erases all remotes.
  2. Key in, transmission in Park, ignition ON.
  3. On a working remote hold UNLOCK, wait 4 to 10 seconds, then also press PANIC for about one second and release both together; a chime confirms programming mode.
  4. Within 30 seconds, on each remote in turn (old and new), press LOCK and UNLOCK together and release; a chime confirms each remote.
  5. Turn the ignition to LOCK/OFF (or wait for the closing chime after 30 seconds), then test every remote.
Watch out: All remotes are erased when the mode starts: program every remote in the same session. Up to four remotes. Without a working remote the mode cannot be entered: the remote needs a tool.

When the key changed

Key with a blade (regular or flip)

  • 1999 - 2004This yearChip: 4D-64Blade: Y160Sentry Key (SKIM) transponder key.

Check coverage first: support depends on the tool's software version and the exact model. A tool that is not shown here may still cover this car.

Frequently asked questions

Which keys fit the Chrysler 300M 2001–2002?

4 listings fit the Chrysler 300M 2001–2002: smart keys, remote keys, transponder keys, key shells, emergency blades and key blanks, in 4-button versions. Match the part number or FCC ID printed on your original key with the specifications on each listing.

Which transponder chip does the Chrysler 300M 2001–2002 key use?

The listings for this car carry: 4D-64. Check the chip in each listing's specifications.

Can the Chrysler 300M 2001–2002 remote be programmed without a tool?

The remote is programmed on the car, without a tool.