Skip to content

Chrysler LHS 2000 Key Fob & Car Keys

Keys that fit the 1999–2000 Chrysler LHS: transponder keys. 2 compatible keys, remotes & shells (genuine and aftermarket) available for the 2000 Chrysler LHS.

Last updated: 9 November 2026

Key specifications for the Chrysler LHS 1999–2000

Key types
transponder keys, key shells, emergency blades and key blanks

To pick the right part, match the part number or FCC ID printed on your original remote, or listed in the Chrysler parts catalogue, with the specifications on each listing.

A new smart key or remote has to be programmed to the car with a key programmer, and when every key is lost the programming is still done through the diagnostic port. We ship the key worldwide from the UAE by DHL and FedEx; any automotive locksmith or the dealer can cut and program it.

Programming the Chrysler LHS 2000 key

Key with a blade (regular or flip)

Programming steps

Add key - on the car(US / Canada cars)

Needs: two working keys, new blank transponder key cut to the vehicle

  1. Cut the new (never programmed) transponder key to the ignition; have two different keys that already start the vehicle.
  2. Insert the first working key and turn to ON for at least 3 but no more than 15 seconds, then turn OFF and remove it.
  3. Within 15 seconds insert the second working key and turn to ON; after about 10 seconds a chime sounds and the security light flashes. Turn OFF and remove it.
  4. Within 60 seconds (stay under 50 to be safe) insert the new blank key and turn to ON.
  5. After about 10 seconds a single chime sounds, the light stops flashing, stays on about 3 seconds and goes off: the key is learned.
  6. For each further key start again from step 2.
Watch out: Needs two different working keys; with one key or none use a tool (it reads the PIN). The new key must be blank: a key already learned to another vehicle is refused. Up to eight keys. The customer learn works only on US-market vehicles; a GCC or export car needs a tool.

Key type not stated by the list

One tool lists this key.

  • Launch X-431 IMMO
    • Remote

Without a tool

The remote is programmed on the car, without a tool.

Programming steps

Program the remote without a tool(US / Canada cars)

Needs: One working remote available, one working programmed remote, every remote the customer keeps

  1. Turn the ignition to RUN without starting the engine.
  2. On a working remote, hold UNLOCK for 4 to 10 seconds.
  3. Within that window, keep holding UNLOCK, press PANIC for 1 second, then release both. A chime within 3 seconds confirms programming mode.
  4. Within 30 seconds of the chime, press any button on every remote to keep, old ones included. A chime follows each remote.
  5. Turn the ignition OFF, pull the key and test every remote.
Watch out: Without one working remote this method does not work: the first remote needs a tool. Press every remote within 30 seconds of the chime.

When the key changed

Key with a blade (regular or flip)

  • 1999 - 2001This yearChip: 4D-64Blade: Y160Sentry Key (SKIM) chip key.

Check coverage first: support depends on the tool's software version and the exact model. A tool that is not shown here may still cover this car.

Frequently asked questions

Which keys fit the Chrysler LHS 1999–2000?

2 listings fit the Chrysler LHS 1999–2000: transponder keys, key shells, emergency blades and key blanks. Match the part number or FCC ID printed on your original key with the specifications on each listing.

Which tools program a Chrysler LHS 1999–2000 key?

The tool makers' coverage lists name Launch X-431 IMMO for this car; 0 of them list all keys lost. Check your tool's latest coverage list before the job.

Can the Chrysler LHS 1999–2000 remote be programmed without a tool?

The remote is programmed on the car, without a tool.