Chrysler Neon 2001 Key Fob & Car Keys
Keys that fit the 2000–2005 Chrysler Neon: transponder keys, 4D-64 chip. 1 compatible key, remote & shell (genuine and aftermarket) available for the 2001 Chrysler Neon.
Last updated: 2 November 2026
Key specifications for the Chrysler Neon 2000–2005
- Key types
- transponder keys, emergency blades and key blanks
- Transponder chip
- 4D-64
- Part numbers
- Strattec 5905612
To pick the right part, match the part number or FCC ID printed on your original remote, or listed in the Chrysler parts catalogue, with the specifications on each listing.
A new smart key or remote has to be programmed to the car with a key programmer, and when every key is lost the programming is still done through the diagnostic port. We ship the key worldwide from the UAE by DHL and FedEx; any automotive locksmith or the dealer can cut and program it.
Programming the Chrysler Neon 2001 key
Key with a blade (regular or flip)
3 tools list this key. 2 of them list all keys lost.
- OBDSTAR Key Master G3
- Add key
- All keys lost
- Remote
reads the PIN by OBD - XTOOL X100 PAD3 / X100 MAX
- Add key
- All keys lost
- Remote
reads the PIN by OBD · all keys lost on the bench - Add key
- Remote
PIN read function
All keys lost is listed by OBDSTAR Key Master G3 and XTOOL X100 PAD3 / X100 MAX. Lonsdor K518 lists add key only.
Without a tool
Programming steps
Program the remote without a tool(US / Canada cars)
Needs: Procedure 1 (try it first), at least one working remote, every remote the customer keeps
- Gather every remote. Sit in the driver's seat alone with all doors closed and the driver's seatbelt fastened.
- Turn the ignition ON (last position before cranking), engine off.
- On a working remote, hold UNLOCK for 4 to 10 seconds; while still holding it, press PANIC for one second, then release both together.
- A chime within 3 seconds confirms programming mode.
- Within 30 seconds of the chime, press UNLOCK on the same remote; a tone confirms it is stored again.
- Within 30 seconds, press UNLOCK on the next remote; repeat for every remaining remote.
- Turn the ignition OFF and test every remote.
Program the remote without a tool(US / Canada cars)
Needs: Procedure 2 (if procedure 1 fails), at least one working remote, every remote the customer keeps
- Gather every remote. Sit in the driver's seat alone with all doors closed and the driver's seatbelt fastened.
- Turn the ignition ON (last position before cranking), engine off.
- On a working remote, hold UNLOCK for 4 to 10 seconds; while still holding it, press PANIC for one second, then release both together.
- A chime within 3 seconds confirms programming mode.
- Within 30 seconds, press LOCK and UNLOCK together on the same remote and release. After the recognition tone, press and release UNLOCK; a chime confirms it is programmed.
- Within 30 seconds, run the same LOCK and UNLOCK, then UNLOCK sequence on the next remote; repeat for every remaining remote.
- Turn the ignition OFF and test every remote.
Check coverage first: support depends on the tool's software version and the exact model. A tool that is not shown here may still cover this car.
Frequently asked questions
Which keys fit the Chrysler Neon 2000–2005?
1 listing fit the Chrysler Neon 2000–2005: transponder keys, emergency blades and key blanks. Match the part number or FCC ID printed on your original key with the specifications on each listing.
Which transponder chip does the Chrysler Neon 2000–2005 key use?
The listings for this car carry: 4D-64. Check the chip in each listing's specifications.
Which tools program a Chrysler Neon 2000–2005 key?
The tool makers' coverage lists name OBDSTAR Key Master G3, XTOOL X100 PAD3 / X100 MAX and Lonsdor K518 for this car; 2 of them list all keys lost. Check your tool's latest coverage list before the job.
