Skip to content

Chrysler PT Cruiser 2005 Key Fob & Car Keys

Keys that fit the 2001–2005 Chrysler PT Cruiser: remote keys and transponder keys, 3 or 4 buttons, FCC ID GQ43VT9T, ID46 (HITAG 2) or 4D-64 chip, 315 MHz. 5 compatible keys, remotes & shells (genuine and aftermarket) available for the 2005 Chrysler PT Cruiser.

Last updated: 9 November 2026

Key specifications for the Chrysler PT Cruiser 2001–2005

Key types
remote keys, transponder keys, key shells, emergency blades and key blanks
Frequency
315 MHz
Buttons
3- and 4-button
Transponder chip
ID46 (HITAG 2) · 4D-64
Part numbers
04759008 · Strattec 5905612
Battery
2× CR2016 · CR2032
Compatible FCC IDs

To pick the right part, match the part number or FCC ID printed on your original remote, or listed in the Chrysler parts catalogue, with the specifications on each listing. Every remote listed for the Chrysler PT Cruiser 2001–2005 transmits on 315 MHz.

A new smart key or remote has to be programmed to the car with a key programmer, and when every key is lost the programming is still done through the diagnostic port. We ship the key worldwide from the UAE by DHL and FedEx; any automotive locksmith or the dealer can cut and program it.

Programming the Chrysler PT Cruiser 2005 key

Key with a blade (regular or flip)

3 tools list this key. 2 of them list all keys lost.

  • OBDSTAR Key Master G3
    • Add key
    • All keys lost(non-US cars)
    • Remote
    reads the PIN by OBD
  • XTOOL X100 PAD3 / X100 MAX
    • Add key
    • All keys lost
    • Remote
    reads the PIN by OBD · all keys lost on the bench
    • Add key
    • Remote
    PIN read function

All keys lost is listed by OBDSTAR Key Master G3 and XTOOL X100 PAD3 / X100 MAX. Lonsdor K518 lists add key only.

Programming steps

Add key - on the car(US / Canada cars)

Needs: two working keys, new blank transponder key cut to the vehicle

  1. Cut the new (never programmed) transponder key to the ignition; have two different keys that already start the vehicle.
  2. Insert the first working key and turn to ON for at least 3 but no more than 15 seconds, then turn OFF and remove it.
  3. Within 15 seconds insert the second working key and turn to ON; after about 10 seconds a chime sounds and the security light flashes. Turn OFF and remove it.
  4. Within 60 seconds (stay under 50 to be safe) insert the new blank key and turn to ON.
  5. After about 10 seconds a single chime sounds, the light stops flashing, stays on about 3 seconds and goes off: the key is learned.
  6. For each further key start again from step 2.
Watch out: Needs two different working keys; with one key or none use a tool (it reads the PIN). The new key must be blank: a key already learned to another vehicle is refused. Up to eight keys. If the car has no Sentry Key light (no immobilizer fitted), a cut key is enough. The customer learn works only on US-market vehicles; a GCC or export car needs a tool.

Key type not stated by the list

One tool lists this key.

  • Launch X-431 IMMO
    • Remote

Without a tool

The remote is programmed on the car, without a tool.

Programming steps

Program the remote without a tool(US / Canada cars)

Needs: One working remote available, one working programmed remote, every remote the customer keeps

  1. Turn the ignition to RUN without starting the engine.
  2. On a working remote, hold UNLOCK for 4 to 10 seconds.
  3. Within that window, keep holding UNLOCK, press PANIC for 1 second, then release both. A chime within 3 seconds confirms programming mode.
  4. Within 30 seconds of the chime, press any button on every remote to keep, old ones included. A chime follows each remote.
  5. Turn the ignition OFF, pull the key and test every remote.
Watch out: Without one working remote this method does not work: the first remote needs a tool. Press every remote within 30 seconds of the chime.

When the key changed

Key with a blade (regular or flip)

  • 2001 - 2005This yearChip: 4D-64Blade: Y160Sentry Key (SKIM) optional; cars without it start on a cut key.
  • 2006 - 2010Chip: ID46Blade: Y164FCC: OHT692427AARemote head key (SKREEM); US remote heads are 315 MHz.

Check coverage first: support depends on the tool's software version and the exact model. A tool that is not shown here may still cover this car.

Frequently asked questions

Which keys fit the Chrysler PT Cruiser 2001–2005?

5 listings fit the Chrysler PT Cruiser 2001–2005: remote keys, transponder keys, key shells, emergency blades and key blanks, in 3- and 4-button versions. Match the part number or FCC ID printed on your original key with the specifications on each listing.

What frequency does the Chrysler PT Cruiser 2001–2005 remote use?

Every remote listed for the Chrysler PT Cruiser 2001–2005 transmits on 315 MHz.

Which transponder chip does the Chrysler PT Cruiser 2001–2005 key use?

The listings for this car carry: ID46 (HITAG 2) · 4D-64. Check the chip in each listing's specifications.

Which FCC IDs do Chrysler PT Cruiser 2001–2005 remotes carry?

The remotes listed for this car carry FCC ID GQ43VT9T. Match it with the FCC ID printed on your original remote.

Which tools program a Chrysler PT Cruiser 2001–2005 key?

The tool makers' coverage lists name OBDSTAR Key Master G3, XTOOL X100 PAD3 / X100 MAX, Lonsdor K518 and Launch X-431 IMMO for this car; 2 of them list all keys lost. Check your tool's latest coverage list before the job.

Can the Chrysler PT Cruiser 2001–2005 remote be programmed without a tool?

The remote is programmed on the car, without a tool.