SKU: B02395
Chrysler PT Cruiser 2009 Key Fob & Car Keys
Keys that fit the 2007–2010 Chrysler PT Cruiser: remote keys and transponder keys, 2 or 3 buttons, FCC ID 0HT692427AA, ID46 (HITAG 2) or CN3 cloning chip chip, 315 MHz. 7 compatible keys, remotes & shells (genuine and aftermarket) available for the 2009 Chrysler PT Cruiser.
Last updated: 15 November 2026
Key specifications for the Chrysler PT Cruiser 2007–2010
- Key types
- remote keys, transponder keys, key shells and emergency blades
- Frequency
- 315 MHz
- Buttons
- 2- and 3-button
- Transponder chip
- ID46 (HITAG 2) · CN3 cloning chip
- Part numbers
- For Mopar 05175817AA
- Battery
- CR2032
- Compatible FCC IDs
To pick the right part, match the part number or FCC ID printed on your original remote, or listed in the Chrysler parts catalogue, with the specifications on each listing. Every remote listed for the Chrysler PT Cruiser 2007–2010 transmits on 315 MHz.
A new smart key or remote has to be programmed to the car with a key programmer, and when every key is lost the programming is still done through the diagnostic port. We ship the key worldwide from the UAE by DHL and FedEx; any automotive locksmith or the dealer can cut and program it.
- Chrysler / Dodge / Jeep 2004-2016 Remote Head Key Shell 3+1-button Small Type with Y159 Blade$1.40In Stock
- Chrysler / Dodge / Jeep 2004-2017 Remote Head Key Rubber Button Pad 2+1-button with Panic, Small
SKU: B04889
$0.56In Stock - $1.40In Stock
- $3.37In Stock
Programming the Chrysler PT Cruiser 2009 key
Key with a blade (regular or flip)
2 tools list this key. 1 of them list all keys lost.
- OBDSTAR Key Master G3
- Add key
- All keys lost
- Remote
reads the PIN by OBD - Add key
PIN read function
All keys lost is listed by OBDSTAR Key Master G3. Lonsdor K518 lists add key only.
Programming steps
Add key - on the car(US / Canada cars)
Needs: Two working keys available, two working programmed keys, the new key cut to the ignition key code
- Cut the new Sentry Key transponder blank to the ignition lock key code.
- Insert the first working key and turn the ignition ON for at least 3 but no more than 15 seconds.
- Turn to OFF and pull the key out.
- Within 15 seconds, insert the second working key and turn ON. After 10 seconds a chime sounds and the Theft Alarm Light starts flashing.
- Turn to OFF and pull the key out.
- Within 60 seconds, insert the new key and turn ON.
- After 10 seconds a single chime sounds, the Theft Alarm Light stops flashing, stays on for 3 seconds and goes out: the new key is programmed.
- Repeat the whole procedure for each extra key.
Add key - on the car(US / Canada cars)
Needs: two working keys, new blank transponder key cut to the vehicle
- Cut the new (never programmed) transponder key to the ignition; have two different keys that already start the vehicle.
- Insert the first working key and turn to ON for at least 3 but no more than 15 seconds, then turn OFF and remove it.
- Within 15 seconds insert the second working key and turn to ON; after about 10 seconds a chime sounds and the security light flashes. Turn OFF and remove it.
- Within 60 seconds (stay under 50 to be safe) insert the new blank key and turn to ON.
- After about 10 seconds a single chime sounds, the light stops flashing, stays on about 3 seconds and goes off: the key is learned.
- For each further key start again from step 2.
Without a tool
The remote is programmed on the car, without a tool. It takes two working keys.
When the key changed
Key with a blade (regular or flip)
- 2001 - 2005Chip: 4D-64Blade: Y160Sentry Key (SKIM) optional; cars without it start on a cut key.
- 2006 - 2010This yearChip: ID46Blade: Y164FCC: OHT692427AARemote head key (SKREEM); US remote heads are 315 MHz.
Check coverage first: support depends on the tool's software version and the exact model. A tool that is not shown here may still cover this car.
Frequently asked questions
Which keys fit the Chrysler PT Cruiser 2007–2010?
7 listings fit the Chrysler PT Cruiser 2007–2010: remote keys, transponder keys, key shells and emergency blades, in 2- and 3-button versions. Match the part number or FCC ID printed on your original key with the specifications on each listing.
What frequency does the Chrysler PT Cruiser 2007–2010 remote use?
Every remote listed for the Chrysler PT Cruiser 2007–2010 transmits on 315 MHz.
Which transponder chip does the Chrysler PT Cruiser 2007–2010 key use?
The listings for this car carry: ID46 (HITAG 2) · CN3 cloning chip. Check the chip in each listing's specifications.
Which FCC IDs do Chrysler PT Cruiser 2007–2010 remotes carry?
The remotes listed for this car carry FCC ID 0HT692427AA. Match it with the FCC ID printed on your original remote.
Which tools program a Chrysler PT Cruiser 2007–2010 key?
The tool makers' coverage lists name OBDSTAR Key Master G3 and Lonsdor K518 for this car; 1 of them lists all keys lost. Check your tool's latest coverage list before the job.
Can the Chrysler PT Cruiser 2007–2010 remote be programmed without a tool?
The remote is programmed on the car, without a tool. It takes two working keys.






