Skip to content

Chrysler Sebring 2010 Key Fob & Car Keys

Keys that fit the 2010 Chrysler Sebring: remote keys and transponder keys, 3 buttons, ID46 (HITAG 2) or CN3 cloning chip chip, 315 MHz. 4 compatible keys, remotes & shells (genuine and aftermarket) available for the 2010 Chrysler Sebring.

Last updated: 16 November 2026

Key specifications for the Chrysler Sebring 2010

Key types
remote keys, transponder keys, key shells and emergency blades
Frequency
315 MHz
Buttons
3-button
Transponder chip
ID46 (HITAG 2) · CN3 cloning chip
Battery
CR2032

To pick the right part, match the part number or FCC ID printed on your original remote, or listed in the Chrysler parts catalogue, with the specifications on each listing. Every remote listed for the Chrysler Sebring 2010 transmits on 315 MHz.

A new smart key or remote has to be programmed to the car with a key programmer, and when every key is lost the programming is still done through the diagnostic port. We ship the key worldwide from the UAE by DHL and FedEx; any automotive locksmith or the dealer can cut and program it.

Programming the Chrysler Sebring 2010 key

Key with a blade (regular or flip)

3 tools list this key. 2 of them list all keys lost.

  • OBDSTAR Key Master G3
    • Add key
    • All keys lost
    • Remote
    reads the PIN by OBD
  • XTOOL X100 PAD3 / X100 MAX
    • Add key
    • All keys lost
    • Remote
    PIN read function
    • Add key
    PIN read function

All keys lost is listed by OBDSTAR Key Master G3 and XTOOL X100 PAD3 / X100 MAX. Lonsdor K518 lists add key only.

Programming steps

Add key - on the car(US / Canada cars)

Needs: Two working keys available, two working programmed keys, the new key cut to the ignition key code

  1. Cut the new Sentry Key transponder blank to the ignition lock key code.
  2. Insert the first working key and turn the ignition ON for at least 3 but no more than 15 seconds.
  3. Turn to OFF and pull the key out.
  4. Within 15 seconds, insert the second working key and turn ON. After 10 seconds a chime sounds and the Theft Alarm Light starts flashing.
  5. Turn to OFF and pull the key out.
  6. Within 60 seconds, insert the new key and turn ON.
  7. After 10 seconds a single chime sounds, the Theft Alarm Light stops flashing, stays on for 3 seconds and goes out: the new key is programmed.
  8. Repeat the whole procedure for each extra key.
Watch out: The first key must stay ON 3 to 15 seconds, the second key goes in within 15 seconds and the new key within 60 seconds. Up to 8 keys can be programmed.

Key type not stated by the list

One tool lists this key.

  • Launch X-431 IMMO
    • Add key
    • Remote
    PIN read function

When the key changed

Key with a blade (regular or flip)

  • 1998 - 2006Chip: 4D-64Blade: Y160Sedan and convertible; Sentry Key (SKIM) optional. The 2001-2005 coupe differs.
  • 2007 - 2010This yearChip: ID46Blade: Y164Remote head key (SKREEM); US remote heads are 315 MHz.

Check coverage first: support depends on the tool's software version and the exact model. A tool that is not shown here may still cover this car.

Frequently asked questions

Which keys fit the Chrysler Sebring 2010?

4 listings fit the Chrysler Sebring 2010: remote keys, transponder keys, key shells and emergency blades, in 3-button versions. Match the part number or FCC ID printed on your original key with the specifications on each listing.

What frequency does the Chrysler Sebring 2010 remote use?

Every remote listed for the Chrysler Sebring 2010 transmits on 315 MHz.

Which transponder chip does the Chrysler Sebring 2010 key use?

The listings for this car carry: ID46 (HITAG 2) · CN3 cloning chip. Check the chip in each listing's specifications.

Which tools program a Chrysler Sebring 2010 key?

The tool makers' coverage lists name OBDSTAR Key Master G3, XTOOL X100 PAD3 / X100 MAX, Lonsdor K518 and Launch X-431 IMMO for this car; 2 of them list all keys lost. Check your tool's latest coverage list before the job.