Skip to content

Dacia Dokker 2020 Key Fob & Car Keys

We don't stock a key for this vehicle yet.

No products yet for this selection.

Get notified when it's available

Programming the Dacia Dokker 2020 key

Key with a blade (regular or flip)

Programming steps

Add key - OBD key programmer with the Renault / Dacia UCH menu (Lonsdor K518, OBDSTAR X300, Launch X431 IMMO, XTOOL)(GCC / Europe cars)

Needs: working key, new 4A (PCF7961M) remote key cut to the car, every key the customer keeps

  1. Connect at the OBD port and switch the ignition on with a working key.
  2. Open the Renault / Dacia menu for Dokker (2012-2021) and read the PIN code: the tool takes it from the UCH by OBD.
  3. Choose Add key and insert the new key in the ignition when asked; the remote is learned together with the transponder.
  4. Test start and remote with the new key.
  5. Test the customer's other keys too; if one no longer starts the car, learn it again in the same session.
Watch out: The UCH holds up to four keys. Use a Hitag AES (4A) key: a Hitag 2 (ID46) key from the earlier car will not learn.

When the key changed

Key with a blade (regular or flip)

  • 2012 - 2021This yearChip: ID4A433 MHz(GCC / Europe cars)Dokker remote key, same key as Logan II and Lodgy

Check coverage first: support depends on the tool's software version and the exact model. A tool that is not shown here may still cover this car.