Dacia Dokker 2021 Key Fob & Car Keys
We don't stock a key for this vehicle yet.
No products yet for this selection.
Get notified when it's available
Programming the Dacia Dokker 2021 key
Key with a blade (regular or flip)
Programming steps
Add key - OBD key programmer with the Renault / Dacia UCH menu (Lonsdor K518, OBDSTAR X300, Launch X431 IMMO, XTOOL)(GCC / Europe cars)
Needs: working key, new 4A (PCF7961M) remote key cut to the car, every key the customer keeps
- Connect at the OBD port and switch the ignition on with a working key.
- Open the Renault / Dacia menu for Dokker (2012-2021) and read the PIN code: the tool takes it from the UCH by OBD.
- Choose Add key and insert the new key in the ignition when asked; the remote is learned together with the transponder.
- Test start and remote with the new key.
- Test the customer's other keys too; if one no longer starts the car, learn it again in the same session.
Watch out: The UCH holds up to four keys. Use a Hitag AES (4A) key: a Hitag 2 (ID46) key from the earlier car will not learn.
When the key changed
Key with a blade (regular or flip)
- 2012 - 2021This yearChip: ID4A433 MHz(GCC / Europe cars)Dokker remote key, same key as Logan II and Lodgy
Check coverage first: support depends on the tool's software version and the exact model. A tool that is not shown here may still cover this car.