SKU: B02389
Dodge Durango 2004 Key Fob & Car Keys
Keys that fit the 2004 Dodge Durango: remote keys, 2 or 3 buttons, FCC ID 0HT692427AA or K0BDT04A, ID46 (HITAG 2) chip, 315 MHz. 8 compatible keys, remotes & shells (genuine and aftermarket) available for the 2004 Dodge Durango.
Last updated: 15 November 2026
Key specifications for the Dodge Durango 2004
- Key types
- remote keys, key shells and emergency blades
- Frequency
- 315 MHz
- Buttons
- 2- and 3-button
- Transponder chip
- ID46 (HITAG 2)
- Part numbers
- For Mopar 05175817AA
- Battery
- CR2032
- Compatible FCC IDs
To pick the right part, match the part number or FCC ID printed on your original remote, or listed in the Dodge parts catalogue, with the specifications on each listing. Every remote listed for the Dodge Durango 2004 transmits on 315 MHz.
A new smart key or remote has to be programmed to the car with a key programmer, and when every key is lost the programming is still done through the diagnostic port. We ship the key worldwide from the UAE by DHL and FedEx; any automotive locksmith or the dealer can cut and program it.
- Chrysler / Dodge / Jeep 2004-2012 Remote Head Key Shell 2-button Big Type with Y159 Blade$1.40In Stock
- $1.40In Stock
- Chrysler / Dodge / Jeep 2004-2016 Remote Head Key Shell 3+1-button Small Type with Y159 Blade
SKU: B02395
$1.40In Stock - Chrysler / Dodge / Jeep 2004-2017 Remote Head Key Rubber Button Pad 2+1-button with Panic, Small
SKU: B04889
$0.56In Stock - $1.40In Stock
- $1.40In Stock
Programming the Dodge Durango 2004 key
Key with a blade (regular or flip)
3 tools list this key. 2 of them list all keys lost.
- OBDSTAR Key Master G3
- Add key
- All keys lost
- Remote
reads the PIN by OBD - XTOOL X100 PAD3 / X100 MAX
- Add key
- All keys lost
- Remote
PIN read function - Add key
- Remote
PIN read function
All keys lost is listed by OBDSTAR Key Master G3 and XTOOL X100 PAD3 / X100 MAX. Lonsdor K518 lists add key only.
Programming steps
Add key - on the car(US / Canada cars)
Needs: two working keys, new blank transponder key cut to the vehicle
- Cut the new (never programmed) transponder key to the ignition; have two different keys that already start the vehicle.
- Insert the first working key and turn to ON for at least 3 but no more than 15 seconds, then turn OFF and remove it.
- Within 15 seconds insert the second working key and turn to ON; after about 10 seconds a chime sounds and the security light flashes. Turn OFF and remove it.
- Within 60 seconds (stay under 50 to be safe) insert the new blank key and turn to ON.
- After about 10 seconds a single chime sounds, the light stops flashing, stays on about 3 seconds and goes off: the key is learned.
- For each further key start again from step 2.
Add key - on the car(US / Canada cars)
Needs: Remote keys with transponder, two working keys available, two working programmed remote keys, the new remote key cut to the car
- Insert the first working key and turn the ignition ON for 5 seconds without cranking, then OFF and pull it out.
- Within 5 seconds, insert the second working key and turn ON. Within 10 seconds the security light flashes and a chime sounds (some cars only flash).
- Turn OFF and pull the second key out.
- Within 5 seconds, insert the new cut key and turn ON. Within 10 seconds a chime sounds and the security light goes out: the key is programmed.
- Turn OFF, pull the key and test the key and its remote.
Key type not stated by the list
One tool lists this key.
- Launch X-431 IMMO
- Remote
PIN read function
Without a tool
The remote is programmed on the car, without a tool. Up to 6 remotes.
Programming steps
Program the remote without a tool(US / Canada cars)
Needs: Remote keys without transponder (remote part only), one working programmed remote key, every remote key the customer keeps
- Get in, close all doors and turn the ignition to RUN without starting the engine.
- On a working remote, hold UNLOCK for 4 to 10 seconds.
- Within that window, keep holding UNLOCK and press PANIC. A chime confirms programming mode; release both.
- Within 60 seconds, on each remote to program, hold LOCK and UNLOCK together for 2 seconds and release. A chime sounds.
- Within 4 seconds, press and release UNLOCK on the same remote. A second chime sounds.
- Turn the ignition OFF, pull the key and test every remote.
When the key changed
Smart key (push to start)
- 2014 - 2020Chip: ID46433 MHzFCC: M3N-40821302Hitag2 smart key (RF hub).
Key with a blade (regular or flip)
- 2001 - 2003Chip: 4D-64Blade: Y160Sentry Key (SKIM) optional on this body.
- 2004 - 2009This yearChip: ID46Blade: Y164Remote head key (SKREEM). No 2010 Durango was built.
- 2011 - 2013Chip: ID46Fobik: the fob goes into the dash slot and turns, no blade.
Check coverage first: support depends on the tool's software version and the exact model. A tool that is not shown here may still cover this car.
Frequently asked questions
Which keys fit the Dodge Durango 2004?
8 listings fit the Dodge Durango 2004: remote keys, key shells and emergency blades, in 2- and 3-button versions. Match the part number or FCC ID printed on your original key with the specifications on each listing.
What frequency does the Dodge Durango 2004 remote use?
Every remote listed for the Dodge Durango 2004 transmits on 315 MHz.
Which transponder chip does the Dodge Durango 2004 key use?
The listings for this car carry: ID46 (HITAG 2). Check the chip in each listing's specifications.
Which FCC IDs do Dodge Durango 2004 remotes carry?
The remotes listed for this car carry FCC ID 0HT692427AA and K0BDT04A. Match it with the FCC ID printed on your original remote.
Which tools program a Dodge Durango 2004 key?
The tool makers' coverage lists name OBDSTAR Key Master G3, XTOOL X100 PAD3 / X100 MAX, Lonsdor K518 and Launch X-431 IMMO for this car; 2 of them list all keys lost. Check your tool's latest coverage list before the job.
Can the Dodge Durango 2004 remote be programmed without a tool?
The remote is programmed on the car, without a tool. Up to 6 remotes.







