Dodge Intrepid 1999 Key Fob & Car Keys
Keys that fit the 1998–2000 Dodge Intrepid: transponder keys, 4D-64 chip. 3 compatible keys, remotes & shells (genuine and aftermarket) available for the 1999 Dodge Intrepid.
Last updated: 9 November 2026
Key specifications for the Dodge Intrepid 1998–2000
- Key types
- transponder keys, key shells, emergency blades and key blanks
- Transponder chip
- 4D-64
- Part numbers
- Strattec 5905612
To pick the right part, match the part number or FCC ID printed on your original remote, or listed in the Dodge parts catalogue, with the specifications on each listing.
A new smart key or remote has to be programmed to the car with a key programmer, and when every key is lost the programming is still done through the diagnostic port. We ship the key worldwide from the UAE by DHL and FedEx; any automotive locksmith or the dealer can cut and program it.
- $1.12In Stock
Programming the Dodge Intrepid 1999 key
Key with a blade (regular or flip)
Programming steps
Add key - on the car(US / Canada cars)
Needs: two working keys, new blank transponder key cut to the vehicle
- Cut the new (never programmed) transponder key to the ignition; have two different keys that already start the vehicle.
- Insert the first working key and turn to ON for at least 3 but no more than 15 seconds, then turn OFF and remove it.
- Within 15 seconds insert the second working key and turn to ON; after about 10 seconds a chime sounds and the security light flashes. Turn OFF and remove it.
- Within 60 seconds (stay under 50 to be safe) insert the new blank key and turn to ON.
- After about 10 seconds a single chime sounds, the light stops flashing, stays on about 3 seconds and goes off: the key is learned.
- For each further key start again from step 2.
Without a tool
The remote is programmed on the car, without a tool.
Programming steps
Program the remote without a tool(US / Canada cars)
Needs: One working remote available, one working programmed remote, every remote the customer keeps
- Turn the ignition to RUN without starting the engine.
- On a working remote, hold UNLOCK for 4 to 10 seconds.
- Within that window, keep holding UNLOCK, press PANIC for 1 second, then release both. A chime within 3 seconds confirms programming mode.
- Within 30 seconds of the chime, press any button on every remote to keep, old ones included. A chime follows each remote.
- Turn the ignition OFF, pull the key and test every remote.
When the key changed
Key with a blade (regular or flip)
- 1998 - 2004This yearChip: 4D-64Blade: Y160Sentry Key (SKIM) optional; cars without it start on a cut key.
Check coverage first: support depends on the tool's software version and the exact model. A tool that is not shown here may still cover this car.
Frequently asked questions
Which keys fit the Dodge Intrepid 1998–2000?
3 listings fit the Dodge Intrepid 1998–2000: transponder keys, key shells, emergency blades and key blanks. Match the part number or FCC ID printed on your original key with the specifications on each listing.
Which transponder chip does the Dodge Intrepid 1998–2000 key use?
The listings for this car carry: 4D-64. Check the chip in each listing's specifications.
Can the Dodge Intrepid 1998–2000 remote be programmed without a tool?
The remote is programmed on the car, without a tool.


