Skip to content

Dodge RAM 2002–2005 Key Fob & Car Keys

Keys that fit the 2002–2005 Dodge RAM: smart keys, remote keys and transponder keys, 2 or 3 buttons, 4D-64 chip, 433 MHz. 5 compatible keys, remotes & shells (genuine and aftermarket) available for the 2002 Dodge RAM.

Last updated: 9 November 2026

Key specifications for the Dodge RAM 2002–2005

Key types
smart keys, remote keys, transponder keys, key shells, emergency blades and key blanks
Frequency
433 MHz
Buttons
2- and 3-button
Transponder chip
4D-64
Part numbers
56045191AC · Strattec 5905612
Battery
2× CR2016

To pick the right part, match the part number or FCC ID printed on your original remote, or listed in the Dodge parts catalogue, with the specifications on each listing. Every remote listed for the Dodge RAM 2002–2005 transmits on 433 MHz.

A new smart key or remote has to be programmed to the car with a key programmer, and when every key is lost the programming is still done through the diagnostic port. We ship the key worldwide from the UAE by DHL and FedEx; any automotive locksmith or the dealer can cut and program it.

Programming the Dodge RAM 2002 key

Key with a blade (regular or flip)

6 tools list this key. 2 of them list all keys lost.

  • OBDSTAR Key Master G3
    • Add key
    • All keys lost
    • Remote
    reads the PIN by OBD
  • XTOOL X100 PAD3 / X100 MAX
    • Add key
    • All keys lost
    • Remote
    reads the PIN by OBD · all keys lost on the bench
    • Add key
    • Remote
    PIN read function
  • Advanced Diagnostics Smart Pro
    • Add key
    • Universal key
    • Universal key

All keys lost is listed by OBDSTAR Key Master G3 and XTOOL X100 PAD3 / X100 MAX. Lonsdor K518 and Advanced Diagnostics Smart Pro list add key only.

Programming steps

Add key - on the car(US / Canada cars)

Needs: two working keys, new blank transponder key cut to the vehicle

  1. Cut the new (never programmed) transponder key to the ignition; have two different keys that already start the vehicle.
  2. Insert the first working key and turn to ON for at least 3 but no more than 15 seconds, then turn OFF and remove it.
  3. Within 15 seconds insert the second working key and turn to ON; after about 10 seconds a chime sounds and the security light flashes. Turn OFF and remove it.
  4. Within 60 seconds (stay under 50 to be safe) insert the new blank key and turn to ON.
  5. After about 10 seconds a single chime sounds, the light stops flashing, stays on about 3 seconds and goes off: the key is learned.
  6. For each further key start again from step 2.
Watch out: Needs two different working keys; with one key or none use a tool (it reads the PIN). The new key must be blank: a key already learned to another vehicle is refused. Up to eight keys. If the car has no Sentry Key light (no immobilizer fitted), a cut key is enough. The customer learn works only on US-market vehicles; a GCC or export car needs a tool.

Without a tool

The remote is programmed on the car, without a tool. Up to 4 remotes.

Programming steps

Program the remote without a tool(US / Canada cars)

Needs: One working remote available, one working programmed remote, every remote the customer keeps

  1. Get in, close all doors and fasten the seat belt to stop other chimes.
  2. Insert the key and turn the ignition ON without starting the engine.
  3. On a working remote, hold UNLOCK; after at least 4 but no more than 10 seconds, also press and hold PANIC.
  4. Release both buttons at the single chime: programming mode is on.
  5. On the remote to program, press and release LOCK and UNLOCK together. A single chime confirms it is recognized.
  6. Within 4 seconds, press and release any button on that remote. A single chime confirms it is programmed.
  7. Repeat the last two steps for each remote, up to 4 in total.
  8. Turn the ignition OFF, or wait 60 seconds, to leave programming mode.
Watch out: Without one working remote this method does not work: the first remote needs a tool. Up to 4 remotes can be programmed.

When the key changed

Smart key (push to start)

  • 2013 - 2018Chip: ID46433 MHzFCC: GQ4-54TKeyless Go trucks; GQ4-54T is a 4A fob on the Cherokee, read the chip.
  • 2019 - 2024Chip: Hitag AES (4A)433 MHzFCC: OHT-4882056, GQ4-76TOHT-4882056 on the 1500 (DT), GQ4-76T on the 2500 / 3500 HD.

Key with a blade (regular or flip)

  • 2002 - 2005This yearChip: 4D-64Blade: Y160Sentry Key (SKIM) optional; trucks without it start on a cut key.
  • 2006 - 2008Chip: ID46Blade: Y164Remote head key (SKREEM).
  • 2009 - 2023Chip: ID46433 MHzFCC: GQ4-53TFobik; HD trucks from 2011; from 2019 only the 1500 Classic.

Check coverage first: support depends on the tool's software version and the exact model. A tool that is not shown here may still cover this car.

Frequently asked questions

Which keys fit the Dodge RAM 2002–2005?

5 listings fit the Dodge RAM 2002–2005: smart keys, remote keys, transponder keys, key shells, emergency blades and key blanks, in 2- and 3-button versions. Match the part number or FCC ID printed on your original key with the specifications on each listing.

What frequency does the Dodge RAM 2002–2005 remote use?

Every remote listed for the Dodge RAM 2002–2005 transmits on 433 MHz.

Which transponder chip does the Dodge RAM 2002–2005 key use?

The listings for this car carry: 4D-64. Check the chip in each listing's specifications.

Which tools program a Dodge RAM 2002–2005 key?

The tool makers' coverage lists name OBDSTAR Key Master G3, XTOOL X100 PAD3 / X100 MAX, Lonsdor K518, Advanced Diagnostics Smart Pro, Xhorse VVDI Key Tool Max and Xhorse VVDI Key Tool Plus for this car; 2 of them list all keys lost. Check your tool's latest coverage list before the job.

Can the Dodge RAM 2002–2005 remote be programmed without a tool?

The remote is programmed on the car, without a tool. Up to 4 remotes.