Skip to content

Dodge Viper 2003–2006 Key Fob & Car Keys

Keys that fit the 2003–2006 Dodge Viper: smart keys and remote keys, 4 buttons. 1 compatible key, remote & shell (genuine and aftermarket) available for the 2003 Dodge Viper.

Last updated: 2 October 2026

Key specifications for the Dodge Viper 2003–2006

Key types
smart keys, remote keys and key shells
Buttons
4-button

To pick the right part, match the part number or FCC ID printed on your original remote, or listed in the Dodge parts catalogue, with the specifications on each listing.

A new smart key or remote has to be programmed to the car with a key programmer, and when every key is lost the programming is still done through the diagnostic port. We ship the key worldwide from the UAE by DHL and FedEx; any automotive locksmith or the dealer can cut and program it.

Programming the Dodge Viper 2003 key

Key type not stated by the list

One tool lists this key.

  • Launch X-431 IMMO
    • Remote

Without a tool

Programming steps

Program the remote without a tool(US / Canada cars)

Needs: Procedure 1 (try it first), at least one working remote, every remote the customer keeps

  1. Gather every remote. Sit in the driver's seat alone with all doors closed and the driver's seatbelt fastened.
  2. Turn the ignition ON (last position before cranking), engine off.
  3. On a working remote, hold UNLOCK for 4 to 10 seconds; while still holding it, press PANIC for one second, then release both together.
  4. A chime within 3 seconds confirms programming mode.
  5. Within 30 seconds of the chime, press UNLOCK on the same remote; a tone confirms it is stored again.
  6. Within 30 seconds, press UNLOCK on the next remote; repeat for every remaining remote.
  7. Turn the ignition OFF and test every remote.
Watch out: Without a working remote, the new remote must be programmed by a locksmith or dealer. Reprogram every remote to keep, the working ones included.
Program the remote without a tool(US / Canada cars)

Needs: Procedure 2 (if procedure 1 fails), at least one working remote, every remote the customer keeps

  1. Gather every remote. Sit in the driver's seat alone with all doors closed and the driver's seatbelt fastened.
  2. Turn the ignition ON (last position before cranking), engine off.
  3. On a working remote, hold UNLOCK for 4 to 10 seconds; while still holding it, press PANIC for one second, then release both together.
  4. A chime within 3 seconds confirms programming mode.
  5. Within 30 seconds, press LOCK and UNLOCK together on the same remote and release. After the recognition tone, press and release UNLOCK; a chime confirms it is programmed.
  6. Within 30 seconds, run the same LOCK and UNLOCK, then UNLOCK sequence on the next remote; repeat for every remaining remote.
  7. Turn the ignition OFF and test every remote.
Watch out: Without a working remote, the new remote must be programmed by a locksmith or dealer. Reprogram every remote to keep, the working ones included.

When the key changed

Smart key (push to start)

  • 2013 - 2017Chip: ID46433 MHzFCC: M3N-40821302(US / Canada cars)VX Viper (badged SRT Viper 2013-2014); push-button start.

Check coverage first: support depends on the tool's software version and the exact model. A tool that is not shown here may still cover this car.

Frequently asked questions

Which keys fit the Dodge Viper 2003–2006?

1 listing fit the Dodge Viper 2003–2006: smart keys, remote keys and key shells, in 4-button versions. Match the part number or FCC ID printed on your original key with the specifications on each listing.

Which tools program a Dodge Viper 2003–2006 key?

The tool makers' coverage lists name Launch X-431 IMMO for this car; 0 of them list all keys lost. Check your tool's latest coverage list before the job.